--- /srv/rebuilderd/tmp/rebuilderd1wnMXF/inputs/linuxcnc-doc-en_2.9.4-2_all.deb +++ /srv/rebuilderd/tmp/rebuilderd1wnMXF/out/linuxcnc-doc-en_2.9.4-2_all.deb ├── file list │ @@ -1,3 +1,3 @@ │ -rw-r--r-- 0 0 0 4 2025-04-13 22:10:01.000000 debian-binary │ -rw-r--r-- 0 0 0 1396 2025-04-13 22:10:01.000000 control.tar.xz │ --rw-r--r-- 0 0 0 28481596 2025-04-13 22:10:01.000000 data.tar.xz │ +-rw-r--r-- 0 0 0 28480824 2025-04-13 22:10:01.000000 data.tar.xz ├── control.tar.xz │ ├── control.tar │ │ ├── ./md5sums │ │ │ ├── ./md5sums │ │ │ │┄ Files differ ├── data.tar.xz │ ├── data.tar │ │ ├── file list │ │ │ @@ -11,15 +11,15 @@ │ │ │ drwxr-xr-x 0 root (0) root (0) 0 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/ │ │ │ -rw-r--r-- 0 root (0) root (0) 1081 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/AUTHORS │ │ │ -rw-r--r-- 0 root (0) root (0) 1884 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/INSTALL.adoc.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 842837 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Developer.pdf │ │ │ -rw-r--r-- 0 root (0) root (0) 29481127 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Documentation.pdf │ │ │ -rw-r--r-- 0 root (0) root (0) 491878 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Getting_Started.pdf │ │ │ -rw-r--r-- 0 root (0) root (0) 150077 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Integrator.pdf │ │ │ --rw-r--r-- 0 root (0) root (0) 1114221 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Manual_Pages.pdf │ │ │ +-rw-r--r-- 0 root (0) root (0) 1114228 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Manual_Pages.pdf │ │ │ -rw-r--r-- 0 root (0) root (0) 3759 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/README.adoc.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1529 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/README.axis │ │ │ -rw-r--r-- 0 root (0) root (0) 506 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/axis_light_background │ │ │ -rw-r--r-- 0 root (0) root (0) 14664 2025-01-25 12:52:00.000000 ./usr/share/doc/linuxcnc/gcode.html │ │ │ -rw-r--r-- 0 root (0) root (0) 1868 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/rtfaults.adoc │ │ │ -rw-r--r-- 0 root (0) root (0) 5504 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc/tklinuxcnc.adoc.gz │ │ │ drwxr-xr-x 0 root (0) root (0) 0 2025-04-13 22:10:01.000000 ./usr/share/doc/linuxcnc-doc-en/ │ │ ├── ./usr/share/doc/linuxcnc/LinuxCNC_Documentation.pdf │ │ │┄ Command `'dumppdf -at {}'` failed with exit code 1. Standard output: │ │ │┄ Traceback (most recent call last): │ │ │┄ File "/usr/bin/dumppdf", line 473, in │ │ │┄ main() │ │ │┄ ~~~~^^ │ │ │┄ File "/usr/bin/dumppdf", line 457, in main │ │ │┄ dumppdf( │ │ │┄ ~~~~~~~^ │ │ │┄ outfp, │ │ │┄ [...] │ │ │ @@ -476575,96 +476575,96 @@ │ │ │ 007459e0: 6465 2f4c 656e 6774 6820 3133 3938 3e3e de/Length 1398>> │ │ │ 007459f0: 0a73 7472 6561 6d0a 78da eddc cf6b e454 .stream.x....k.T │ │ │ 00745a00: 1c00 f0d4 11ba 8765 e726 05c7 c9bf d09e .......e.&...... │ │ │ 00745a10: 54ec 126f fa17 88b4 97bd ee45 bb2c d582 T..o.......E.,.. │ │ │ 00745a20: 4246 3cec 45c8 cd93 923f 4064 8f2a 455a BF<.E....?@d.*EZ │ │ │ 00745a30: 1536 2709 220c ba2d cdc8 c0ce a9bb 1306 .6'."..-........ │ │ │ 00745a40: db64 9bc9 d797 e4e5 fd48 5ec8 641f ac2e .d.......H^.d... │ │ │ -00745a50: 7e87 ddee 239d f9f4 fbfd e67d df7b 4c87 ~...#......}.{L. │ │ │ -00745a60: 0558 e171 f431 1fda 95ef a5ab 0029 d88a .X.q.1.......).. │ │ │ +00745a50: 7e87 fdf1 4867 3efd 7ebf ef7d 5fde 4e87 ~...Hg>.~..}_.N. │ │ │ +00745a60: 0558 e171 f431 1fda 95af a5ab 0029 d88a .X.q.1.......).. │ │ │ 00745a70: 6117 219a 6ddf ac0f bb08 17df ecef d487 a.!.m........... │ │ │ 00745a80: 9d84 fbfb bb36 1b3e a3f0 7e7d d835 86fa .....6.>..~}.5.. │ │ │ -00745a90: b08b 10df df3f a0c3 f0d9 6268 b9d5 2f80 .....?....bh../. │ │ │ -00745aa0: b054 0eaf ba08 4f54 c34f 3a08 89a1 7af4 .T....OT.O:...z. │ │ │ -00745ab0: ba08 7d36 34f8 b0f7 7ceb 80c2 7f42 58c2 ..}64...|....BX. │ │ │ -00745ac0: 25f9 9b3e 8b70 a42b 5c7d e5fd e0df 0538 %..>.p.+\}.....8 │ │ │ -00745ad0: 7dfc fa9b 4b78 7c77 38bb e977 13fe 3edc }...Kx|w8..w..>. │ │ │ -00745ae0: 79ef e21c e0db f178 bc84 f1f9 eddd 93ef y......x........ │ │ │ -00745af0: ba09 9787 bb1f 3d25 c28f 0f33 e1ec fcf6 ......=%...3.... │ │ │ -00745b00: 4957 21fe 7ef7 cb9f ff02 f8f5 c1f8 9525 IW!.~..........% │ │ │ -00745b10: 3c9a 7eb0 fbea bd6e c2f2 f064 fc90 2c06 <.~....n...d..,. │ │ │ -00745b20: e767 e38b 255c 3cf9 70e7 e4a8 9b10 26ef .g..%\<.p.....&. │ │ │ -00745b30: 6c3d d802 f8fa d15b 2406 3f1c 781b 5ed7 l=.....[$.?.x.^. │ │ │ -00745b40: f910 5c96 dfcd 5e66 07dd 6794 bea0 39ab ..\...^f..g...9. │ │ │ -00745b50: cb13 4220 bdcc ee20 940b f199 b440 7711 ..B ... .....@w. │ │ │ -00745b60: 94ab b3d1 45a0 0bf1 dcc8 bebe 4c17 e89f ....E.......L... │ │ │ +00745a90: b08b 10df df3f a0c3 f0d9 6268 99ea 1740 .....?....bh...@ │ │ │ +00745aa0: 582a 8757 5d84 27aa e127 1d84 c450 3d7a X*.W].'..'...P=z │ │ │ +00745ab0: 5d84 3e1b 1a7c d87b be75 40e1 3f21 2ce1 ].>..|.{.u@.?!,. │ │ │ +00745ac0: 92fc 4e9f 4538 d215 aebe f27e f0ef 029c ..N.E8.....~.... │ │ │ +00745ad0: 3e7e fdcd 253c be3b 9cdd f4bb 097f 1fee >~..%<.;........ │ │ │ +00745ae0: bc77 710e f0ed 783c 5ec2 f8fc f6ee c977 .wq...x<^......w │ │ │ +00745af0: dd84 cbc3 dd8f 9e12 e1c7 8799 7076 7efb ............pv~. │ │ │ +00745b00: a4ab 107f bffb e5cf 7f01 fcfa 60fc ca12 ............`... │ │ │ +00745b10: 1e4d 3fd8 7df5 5e37 6179 7832 7e48 3683 .M?.}.^7ayx2~H6. │ │ │ +00745b20: f3b3 f1c5 122e 9e7c b873 72d4 4d08 9377 .......|.sr.M..w │ │ │ +00745b30: b61e 6c01 7cfd e82d 1283 1f0e bc0d afeb ..l.|..-........ │ │ │ +00745b40: 7a08 2ecb af66 2fb3 83ee 2b4a 5fd0 5cd5 z....f/...+J_.\. │ │ │ +00745b50: e509 2190 5e66 7710 ca8d f84c daa0 bb08 ..!.^fw....L.... │ │ │ +00745b60: cadd d9e8 22d0 8d78 6e64 7fbe 4c37 e89f ...."..xnd..L7.. │ │ │ 00745b70: ece7 5a07 14fe bf02 601d 5040 0105 1450 ..Z.....`.P@...P │ │ │ -00745b80: c0fd 0205 1450 4001 0514 70e7 c518 50c0 .....P@...p...P. │ │ │ -00745b90: bec0 3aa0 8002 0a28 a080 c20b 2080 28c0 ..:....(.... .(. │ │ │ -00745ba0: bf20 1c67 bf03 6482 f079 8daa 3037 0c4b . .g..d..y..07.K │ │ │ -00745bb0: 298c 4421 358c b526 6162 1866 9360 8982 ).D!5..&ab.f.`.. │ │ │ -00745bc0: d124 9060 fb4a 81b8 5c48 6c48 9a04 3fff .$.`.J..\HlH..?. │ │ │ -00745bd0: a310 ac1c 2905 c810 b5e0 0078 2a21 2582 ....)......x*!%. │ │ │ -00745be0: cb84 885c 6812 c8b3 664a c1ce 752a c405 ...\h...fJ..u*.. │ │ │ -00745bf0: a914 48a4 5395 9005 ed33 2104 5e95 aa40 ..H.S....3!.^..@ │ │ │ -00745c00: ae2f 9402 d0f4 7261 01bc 2a15 218b 2d54 ./....ra..*.!.-T │ │ │ -00745c10: 0924 f322 bd5c c8c2 741b 0412 6cac 12b2 .$.".\..t...l... │ │ │ -00745c20: 8b53 2664 96a3 16b2 7423 9590 05b6 6042 .S&d....t#....`B │ │ │ -00745c30: 968f df20 d094 6bc2 822a 85e0 0b55 a908 ... ..k..*...U.. │ │ │ -00745c40: 112d 7b4d 98d2 4c0a c111 aa52 1162 7aeb .-{M..L....R.bz. │ │ │ -00745c50: 6bc2 8c56 b310 5ca1 2a15 21a4 d3af 2678 k..V..\.*.!...&x │ │ │ -00745c60: 657a b960 0a55 a908 0bda 0254 8886 c6de ez.`.U.....T.... │ │ │ -00745c70: 701d 68dd ca56 08f2 6784 6a61 4adb 900a p.h..V..g.jaJ... │ │ │ -00745c80: f31b c6ad ebf9 4ae0 006f 8520 8f32 560b ......J..o. .2V. │ │ │ -00745c90: 7979 5c26 4c88 3058 63d7 ac52 b085 aa54 yy\&L.0Xc..R...T │ │ │ -00745ca0: 048f fd3c 9abd 374d 0eca b8ca 5608 f274 ...<..7M....V..t │ │ │ -00745cb0: 12b5 e097 3957 050b 782b 0409 0855 a908 ....9W..x+...U.. │ │ │ -00745cc0: 4e59 f794 ce02 2a14 09d0 5608 2210 aa52 NY....*...V."..R │ │ │ -00745cd0: 11dc f2de a774 2e7b 934f 0fd8 d369 2b04 .....t.{.O...i+. │ │ │ -00745ce0: 3108 55a9 0866 39ff e8bd b0bc c9f6 1a0b 1.U..f9......... │ │ │ -00745cf0: 99b6 4210 8250 958a 6095 3d50 0889 4962 ..B..P..`.=P..Ib │ │ │ -00745d00: e8b1 b2d1 5608 1620 5445 168a c842 3e27 ....V.. TE...B>' │ │ │ -00745d10: fba4 0eeb ecd6 d156 088a 09ed 2a05 bb5c .......V....*..\ │ │ │ -00745d20: 0ba8 e011 c166 d387 b642 5048 8e4a 28d2 .....f...BPH.J(. │ │ │ -00745d30: 8dea 42c8 5a3c 138a 6c7c a5c0 d644 7a37 ..B.Z<..l|...Dz7 │ │ │ -00745d40: ef51 61c1 9699 4cf0 c5aa c842 c4d6 653a .Qa...L....B..e: │ │ │ -00745d50: abfb de64 60b3 f869 2b04 8e58 1559 88d9 ...d`..i+..X.Y.. │ │ │ -00745d60: de40 ef26 b917 d76d f66c da0a 812b 5645 .@.&...m.l...+VE │ │ │ -00745d70: 1642 b63f d1ee b609 c223 a6ad 1098 6255 .B.?.....#....bU │ │ │ -00745d80: 6461 c1f6 c8ca 0ae3 83d0 0a81 2556 4516 da..........%VE. │ │ │ -00745d90: a66c 9fae 080e 08ad 7066 8955 9105 5a1c .l......pf.U..Z. │ │ │ -00745da0: b726 b820 b4c2 992d 5645 163c f613 d3da .&. ...-VE.<.... │ │ │ -00745db0: e981 b7c2 a92d 5645 167c 9675 5a3b 3d70 .....-VE.|.uZ;=p │ │ │ -00745dc0: e814 c4aa c882 c316 e6b4 767a e0c9 fc01 ..........vz.... │ │ │ -00745dd0: 6255 64c1 659b 435a 3b3d f082 fe29 b1b2 bUd.e.CZ;=...).. │ │ │ -00745de0: 60b2 0d2a ad9d 1ef8 4dfd 4d4a 4d16 2cb6 `..*....M.MJM.,. │ │ │ -00745df0: 49a6 b5d3 039f 58bf 4be5 9584 a716 dba8 I.....X.K....... │ │ │ -00745e00: d3da e981 b7c2 2fd2 2d96 3e71 57a6 1b57 ....../.-.>qW..W │ │ │ -00745e10: 8558 d87f f99e ebd4 8532 dda8 2a84 c219 .X.......2..*... │ │ │ -00745e20: 80ef fbbe 42e0 ff0a 42c2 0fd1 f3fc 3376 ....B...B.....3v │ │ │ -00745e30: 7d7e d4ae 3df8 6b5e 128a c085 4812 2675 }~..=.k^....H.&u │ │ │ -00745e40: a03c 6d8b c7e6 dc5b e743 831e bc59 44ea ....).(.... │ │ │ -00745e60: 28a0 8002 0a28 a080 020a 28a0 8002 1714 (....(....(..... │ │ │ -00745e70: 6f45 747c ff61 d2fc 86ca 8ac2 b176 0cbe oEt|.a.......v.. │ │ │ -00745e80: 761d 1c6d c1d5 164c 6dc1 d215 527d c1d6 v..m...Lm...R}.. │ │ │ -00745e90: 1512 7d41 bb2f 226d 21d6 1642 6d61 a112 ..}A./"m!..Bma.. │ │ │ -00745ea0: 4657 a3c8 ec8d 5e9b 6f2f db85 a94a 30ee FW....^.o/...J0. │ │ │ -00745eb0: 187b 377a a36b 93c1 41bb 3053 0a5b c6e6 .{7z.k..A.0S.[.. │ │ │ -00745ec0: b037 da38 5e45 f054 c270 6bb8 95d8 51e4 .7.8^E.T.pk...Q. │ │ │ -00745ed0: 7df1 46bb e06b 0b4e 83b0 b99d 0b1b ed82 }.F..k.N........ │ │ │ -00745ee0: db24 0c56 154c b560 ec15 315c 6b17 ac06 .$.V.L.`..1\k... │ │ │ -00745ef0: e14e 5187 775b 85b4 4908 0be1 ed76 c156 .NQ.w[..I....v.V │ │ │ -00745f00: 0b03 2adc 6a15 9226 8166 b1d7 2e40 c3bd ..*.j..&.f...@.. │ │ │ -00745f10: 5859 8840 dd17 4332 aba3 6895 be88 d542 XY.@..C2..h....B │ │ │ -00745f20: 686e f689 30df 6e17 42a5 f019 4064 7e9e hn..0.n.B...@d~. │ │ │ -00745f30: ff7a b155 5868 9f1f a6da c24c 5bf0 b405 .z.UXh.....L[... │ │ │ -00745f40: 5f5b 70b4 0557 5b30 b505 4b57 48b4 05e5 _[p..W[0..KWH... │ │ │ -00745f50: f2d0 2d06 7da1 ed5c adfe 3f96 5acf bf82 ..-.}..\..?.Z... │ │ │ -00745f60: 10b5 016b da31 f4d4 c23f 1dda 5d3d 0a65 ...k.1...?..]=.e │ │ │ +00745b80: 4001 0514 5040 0105 14f0 5f6a 1803 0ad8 @...P@...._j.... │ │ │ +00745b90: 1758 0714 5040 0105 1450 7801 0410 05f8 .X..P@...Px..... │ │ │ +00745ba0: 1784 e3ec 6780 4c10 3eaf 5115 e686 6129 ....g.L.>.Q...a) │ │ │ +00745bb0: 8591 28a4 86b1 d624 4c0c c36c 122c 5130 ..(....$L..l.,Q0 │ │ │ +00745bc0: 9a04 126c 5f29 1097 0b89 0d49 93e0 e7bf ...l_).....I.... │ │ │ +00745bd0: 1482 9523 a500 19a2 161c 004f 25a4 4470 ...#.......O%.Dp │ │ │ +00745be0: 9910 910b 4d02 79d6 4c29 d8b9 4e85 b820 ....M.y.L)..N.. │ │ │ +00745bf0: 9502 8974 aa12 b2a0 7d26 84c0 ab52 15c8 ...t....}&...R.. │ │ │ +00745c00: f585 5200 9a5e 2e2c 8057 a522 64b1 852a ..R..^.,.W."d..* │ │ │ +00745c10: 8164 5ea4 970b 5998 6e83 4082 8d55 4276 .d^...Y.n.@..UBv │ │ │ +00745c20: 71ca 84cc 72d4 4296 6ea4 12b2 c016 4cc8 q...r.B.n.....L. │ │ │ +00745c30: f2f1 1b04 9a72 4d58 50a5 107c a12a 1521 .....rMXP..|.*.! │ │ │ +00745c40: a265 af09 539a 4921 3842 552a 424c a7be .e..S.I!8BU*BL.. │ │ │ +00745c50: 26cc 6835 0bc1 15aa 5211 42ba fc6a 8257 &.h5....R.B..j.W │ │ │ +00745c60: a697 0ba6 5095 8ab0 a02d 4085 6868 ec0d ....P....-@.hh.. │ │ │ +00745c70: d781 d6ad 6c85 207f 46a8 16a6 b40d a930 ....l. .F......0 │ │ │ +00745c80: bf61 dcba 9eef 040e f056 08f2 2863 b590 .a.......V..(c.. │ │ │ +00745c90: 97c7 65c2 8408 8335 76cd 2a05 5ba8 4a45 ..e....5v.*.[.JE │ │ │ +00745ca0: f0d8 f7a3 d97b d3e4 a08c ab6c 8520 4f27 .....{.....l. O' │ │ │ +00745cb0: 510b 7e99 7355 b080 b742 9080 5095 8ae0 Q.~.sU...B..P... │ │ │ +00745cc0: 9475 4fe9 2aa0 4291 006d 8520 02a1 2a15 .uO.*.B..m. ..*. │ │ │ +00745cd0: c12d e73e a56b d99b 7c7a c09e 4e5b 2188 .-.>.k..|z..N[!. │ │ │ +00745ce0: 41a8 4a45 30cb f547 e7c2 f226 db6b 2c64 A.JE0..G...&.k,d │ │ │ +00745cf0: da0a 4108 4255 2a82 55f6 4021 2426 89a1 ..A.BU*.U.@!$&.. │ │ │ +00745d00: c7ca 465b 2158 8050 1559 2822 0bf9 9aec ..F[!X.P.Y(".... │ │ │ +00745d10: 933a acb3 a9a3 ad10 140b da55 0a76 b917 .:.........U.v.. │ │ │ +00745d20: 50c1 2382 cd96 0f6d 85a0 901c 9550 a41b P.#....m.....P.. │ │ │ +00745d30: d585 90b5 7826 14d9 f84a 81ed 8974 36ef ....x&...J...t6. │ │ │ +00745d40: 5161 c1b6 994c f0c5 aac8 42c4 f665 baaa Qa...L....B..e.. │ │ │ +00745d50: fbde 6460 b3f8 692b 048e 5815 5988 d9bd ..d`..i+..X.Y... │ │ │ +00745d60: 81ce 2699 8beb 367b 366d 85c0 15ab 220b ..&...6{6m....". │ │ │ +00745d70: 21bb 3fd1 eeb6 09c2 23a6 ad10 9862 5564 !.?.....#....bUd │ │ │ +00745d80: 61c1 ee91 951d c607 a115 024b ac8a 2c4c a..........K..,L │ │ │ +00745d90: d97d ba22 3820 b4c2 9925 5645 1668 71dc .}."8 ...%VE.hq. │ │ │ +00745da0: 9ae0 82d0 0a67 b658 1559 f0d8 774c 6ba7 .....g.X.Y..wLk. │ │ │ +00745db0: 07de 0aa7 b658 1559 f059 d669 edf4 c0a1 .....X.Y.Y.i.... │ │ │ +00745dc0: 5310 ab22 0b0e db98 d3da e981 27f3 0788 S.."........'... │ │ │ +00745dd0: 5591 0597 dd1c d2da e981 17f4 4f89 9505 U...........O... │ │ │ +00745de0: 93dd a0d2 dae9 814f ea6f 526a b260 b19b .......O.oRj.`.. │ │ │ +00745df0: 645a 3b3d f085 f5bb 545e 4978 6ab1 1b75 dZ;=....T^Ixj..u │ │ │ +00745e00: 5a3b 3df0 56f8 459a 62e9 1377 65ba 7155 Z;=.V.E.b..we.qU │ │ │ +00745e10: 8885 fb2f bfe7 3a75 a14c 37aa 0aa1 7006 .../..:u.L7...p. │ │ │ +00745e20: e0f7 7d5f 21f0 bf05 21e1 87e8 79fe 19bb ..}_!...!...y... │ │ │ +00745e30: 3e3f 6ad7 1efc 352f 0945 e042 2409 933a >?j...5/.E.B$..: │ │ │ +00745e40: 509e b6c5 6373 eead f3a1 410f de2c 22f5 P...cs....A..,". │ │ │ +00745e50: 27b4 a518 5a1f 4be5 d514 0514 5040 0105 '...Z.K.....P@.. │ │ │ +00745e60: 1450 4001 0514 5040 0105 1450 4081 0b8a .P@...P@...P@... │ │ │ +00745e70: b722 3abe ff30 697e 4365 45e1 583b 065f .":..0i~CeE.X;._ │ │ │ +00745e80: bb0e 8eb6 e06a 0ba6 b660 e90a a9be 60eb .....j...`....`. │ │ │ +00745e90: 0a89 bea0 dd17 91b6 106b 0ba1 b6b0 5009 .........k....P. │ │ │ +00745ea0: a3ab 5164 f646 afcd b797 edc2 5425 1877 ..Qd.F......T%.w │ │ │ +00745eb0: 8cbd 1bbd d1b5 c9e0 a05d 9829 852d 6373 .........].).-cs │ │ │ +00745ec0: d81b 6d1c af22 782a 61b8 35dc 4aec 28f2 ..m.."x*a.5.J.(. │ │ │ +00745ed0: be78 a35d f0b5 05a7 41d8 dcce 858d 76c1 .x.]....A.....v. │ │ │ +00745ee0: 6d12 06ab 0aa6 5a30 f68a 18ae b50b 5683 m.....Z0......V. │ │ │ +00745ef0: 70a7 a8c3 bbad 42da 2484 85f0 76bb 60ab p.....B.$...v.`. │ │ │ +00745f00: 8501 156e b50a 4993 40b3 d86b 17a0 612e ...n..I.@..k..a. │ │ │ +00745f10: 5616 2250 f7c5 90ac ea28 5aa5 2f62 b510 V."P.....(Z./b.. │ │ │ +00745f20: 9a9b 7d22 ccb7 db85 5029 7c06 1099 9fe7 ..}"....P)|..... │ │ │ +00745f30: 3f5e 6c15 16da e787 a9b6 30d3 163c 6dc1 ?^l.......0..>.s │ │ │ 00745fb0: 7472 6561 6d0a 78da ad58 4b8f e434 10be tream.x..XK..4.. │ │ │ 00745fc0: f32b f207 3aeb b25d 7e48 a33e 2060 05b7 .+..:..]~H.> `.. │ │ │ 00745fd0: 85b9 210e d3d9 6d2e 8cd0 ec85 bf4f d9ae ..!...m......O.. │ │ │ @@ -688891,19 +688891,19 @@ │ │ │ 00a82fa0: 2f4d 6173 6b5b 3020 305d 2f54 7970 652f /Mask[0 0]/Type/ │ │ │ 00a82fb0: 584f 626a 6563 742f 5375 6274 7970 652f XObject/Subtype/ │ │ │ 00a82fc0: 496d 6167 652f 5769 6474 680a 3138 2f48 Image/Width.18/H │ │ │ 00a82fd0: 6569 6768 7420 3139 2f42 6974 7350 6572 eight 19/BitsPer │ │ │ 00a82fe0: 436f 6d70 6f6e 656e 7420 312f 4669 6c74 Component 1/Filt │ │ │ 00a82ff0: 6572 2f46 6c61 7465 4465 636f 6465 2f4c er/FlateDecode/L │ │ │ 00a83000: 656e 6774 6820 3634 3e3e 0a73 7472 6561 ength 64>>.strea │ │ │ -00a83010: 6d0a 78da 6bfc c0e5 e733 d5c0 9901 883c m.x.k....3.....< │ │ │ +00a83010: 6d0a 78da 6bfc 20e4 e733 d5c0 9901 883c m.x.k. ..3.....< │ │ │ 00a83020: 5c19 5c3c 6635 0504 3626 2435 1ca8 f8ff \.\1}.....W │ │ │ -00a83050: 169b 0a65 6e64 7374 7265 616d 0a65 6e64 ...endstream.end │ │ │ +00a83040: cd06 ceca 06ce 7c3e 317d cd0f ec01 810f ......|>1}...... │ │ │ +00a83050: 16a3 0a65 6e64 7374 7265 616d 0a65 6e64 ...endstream.end │ │ │ 00a83060: 6f62 6a0a 3530 3835 2030 206f 626a 0a3c obj.5085 0 obj.< │ │ │ 00a83070: 3c2f 4669 6c74 6572 2f46 6c61 7465 4465 >.stream.x..Z.. │ │ │ 00a830a0: 23bb 0ddd e72b ea07 5a57 0fea 0534 7a11 #....+..ZW...4z. │ │ │ 00a830b0: 24b9 4876 37e9 5d90 85ed e9ce 2683 60b2 $.Hv7.].....&.`. │ │ │ 00a830c0: c9ef 8792 4889 aa87 cbee c90c 0c77 5549 ....H........wUI │ │ ├── ./usr/share/doc/linuxcnc/LinuxCNC_Manual_Pages.pdf │ │ │ ├── pdftotext {} - │ │ │ │ @@ -5810,15 +5810,15 @@ │ │ │ │ Modbus slave address │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ 122 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ pmx485-test(1) │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ @@ -7509,15 +7509,15 @@ │ │ │ │ Computed resistance of the thermistor. │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 163 │ │ │ │ │ │ │ │ tool_mmap_read(1) │ │ │ │ │ │ │ │ The Enhanced Machine Controller │ │ │ │ │ │ │ │ @@ -8129,15 +8129,15 @@ │ │ │ │ Modbus slave address │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ 176 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ XHC-HB04-ACCELS(1) │ │ │ │ │ │ │ │ The Enhanced Machine Controller │ │ │ │ │ │ │ │ @@ -12480,15 +12480,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 270 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ABS_S32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -12519,15 +12519,15 @@ │ │ │ │ Sebastian Kuzminsky │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 271 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ AND2(9) │ │ │ │ │ │ │ │ @@ -12559,15 +12559,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 272 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ANGLEJOG(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -12611,15 +12611,15 @@ │ │ │ │ anglejog.N.max-vel float in │ │ │ │ vector max velocity magnitude │ │ │ │ anglejog.N.max-accel float in │ │ │ │ vector max acceleration magnitude │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 273 │ │ │ │ │ │ │ │ ANGLEJOG(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -12654,15 +12654,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 274 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ AT_PID(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -12730,15 +12730,15 @@ │ │ │ │ Chris S. Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 276 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BIN2GRAY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -12766,15 +12766,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 277 │ │ │ │ │ │ │ │ BIQUAD(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -12828,15 +12828,15 @@ │ │ │ │ biquad.N.n1 float rw (default: 0.0) │ │ │ │ 1st-delayed numerator coef │ │ │ │ biquad.N.n2 float rw (default: 0.0) │ │ │ │ 2nd-delayed numerator coef │ │ │ │ │ │ │ │ 278 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BIQUAD(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -12846,15 +12846,15 @@ │ │ │ │ Peter G. Vavaroutsos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 279 │ │ │ │ │ │ │ │ BITSLICE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -12883,15 +12883,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL2+ │ │ │ │ │ │ │ │ 280 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BITWISE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -12928,15 +12928,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL 2+ │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 281 │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -12978,15 +12978,15 @@ │ │ │ │ H Emulated Hall sensor output. This mode can be used to control a drive which expects 3x Hall signals, or │ │ │ │ to convert between a motor with one hall pattern and a drive which expects a different one. │ │ │ │ F Emulated Fanuc Red Cap Gray-code encoder output. This mode might be used to drive a non-Fanuc motor using a Fanuc drive intended for the "Red-Cap" motors. │ │ │ │ T Force Trapezoidal mode. │ │ │ │ │ │ │ │ 282 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13034,15 +13034,15 @@ │ │ │ │ bldc.N.C8 bit in [if ( personality & 0x10 )] │ │ │ │ Fanuc Gray-code bit 3 input │ │ │ │ bldc.N.value float in │ │ │ │ PWM master amplitude input │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 283 │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13089,15 +13089,15 @@ │ │ │ │ bldc.N.A-high float out [if ( personality & 0xF00 ) == 0x200] │ │ │ │ High-side driver for phase A │ │ │ │ bldc.N.B-high float out [if ( personality & 0xF00 ) == 0x200] │ │ │ │ High-side driver for phase B │ │ │ │ │ │ │ │ 284 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13146,15 +13146,15 @@ │ │ │ │ offset such as the 8I20. This value has a range of 0 to 1 and measures electrical revolutions. It will │ │ │ │ have two zeros for a 4 pole motor, three for a 6-pole, etc. │ │ │ │ bldc.N.out float out │ │ │ │ Current output, including the effect of the dir pin and the alignment sequence. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 285 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ @@ -13191,15 +13191,15 @@ │ │ │ │ Bodine). 22 (240 degree). 25 (60 degree commutation). │ │ │ │ Note that a number of incorrect commutations will have non-zero net torque which might look as │ │ │ │ if they work, but don’t really. │ │ │ │ If your motor lacks documentation it might be worth trying every pattern. │ │ │ │ │ │ │ │ 286 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ @@ -13499,15 +13499,15 @@ │ │ │ │ 001 │ │ │ │ 101 │ │ │ │ 011 │ │ │ │ 001 │ │ │ │ 000 │ │ │ │ 100 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ B-C │ │ │ │ 100 │ │ │ │ 101 │ │ │ │ 100 │ │ │ │ @@ -13569,15 +13569,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 288 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BLEND(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13611,15 +13611,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 289 │ │ │ │ │ │ │ │ CAROUSEL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13663,15 +13663,15 @@ │ │ │ │ and ’edge’ mode this is when both the index and pulse inputs are true. In ’counts’ mode only the index input needs to be set to set home. Additionally in ’counts’ mode the usual index-enable logic of the encoder │ │ │ │ counters is supported. │ │ │ │ With some carousel designs the carousel will not stop immediately. To allow for this set the align-dc pin to │ │ │ │ a low velocity to be used for a final latching move, and set the decel-time to a suitable value. Once the │ │ │ │ │ │ │ │ 290 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CAROUSEL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13719,15 +13719,15 @@ │ │ │ │ and sense-1 is the pocket sensor. │ │ │ │ carousel.N.rev-pulse float in │ │ │ │ The duration in seconds for which a ratchet changer (Boxford, Emco) should pulse the reverse pin │ │ │ │ to lock the holder │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 291 │ │ │ │ │ │ │ │ CAROUSEL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13777,15 +13777,15 @@ │ │ │ │ │ │ │ │ PARAMETERS │ │ │ │ carousel.N.state s32 r (default: 0) │ │ │ │ Current component state │ │ │ │ │ │ │ │ 292 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CAROUSEL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13809,15 +13809,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 293 │ │ │ │ │ │ │ │ CHARGE_PUMP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13853,15 +13853,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 294 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CLARKE2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13899,15 +13899,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 295 │ │ │ │ │ │ │ │ CLARKE3(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13946,15 +13946,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 296 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CLARKEINV (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13992,15 +13992,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 297 │ │ │ │ │ │ │ │ CLASSICLADDER(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14116,15 +14116,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 300 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONSTANT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14149,15 +14149,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 301 │ │ │ │ │ │ │ │ CONV_BIT_FLOAT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14181,15 +14181,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 302 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_BIT_S32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14213,15 +14213,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 303 │ │ │ │ │ │ │ │ CONV_BIT_U32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14245,15 +14245,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 304 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_FLOAT_S32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14283,15 +14283,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 305 │ │ │ │ │ │ │ │ CONV_FLOAT_U32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14321,15 +14321,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 306 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_S32_BIT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14359,15 +14359,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 307 │ │ │ │ │ │ │ │ CONV_S32_FLOAT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14391,15 +14391,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 308 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_S32_U32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14429,15 +14429,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 309 │ │ │ │ │ │ │ │ CONV_U32_BIT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14467,15 +14467,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 310 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_U32_FLOAT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14499,15 +14499,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 311 │ │ │ │ │ │ │ │ CONV_U32_S32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14537,15 +14537,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 312 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ COREXY_BY_HAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14589,15 +14589,15 @@ │ │ │ │ corexy-by-hal.N.alpha-cmd float out │ │ │ │ typ: command to alpha motor │ │ │ │ corexy-by-hal.N.beta-cmd float out │ │ │ │ typ: command to beta ts motor │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 313 │ │ │ │ │ │ │ │ COREXY_BY_HAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14607,15 +14607,15 @@ │ │ │ │ Dewey Garrett based on forum post from nbremond │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 314 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ COUNTER(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14696,15 +14696,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 316 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ DDT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14736,15 +14736,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 317 │ │ │ │ │ │ │ │ DEADZONE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14774,15 +14774,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 318 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ DEBOUNCE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14867,15 +14867,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL 2+ │ │ │ │ │ │ │ │ 320 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ DIFFERENTIAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14912,15 +14912,15 @@ │ │ │ │ Sebastian Kuzminsky │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 321 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ DIV2(9) │ │ │ │ │ │ │ │ @@ -14959,15 +14959,15 @@ │ │ │ │ Noel Rodes │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 322 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ EDGE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15005,15 +15005,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 323 │ │ │ │ │ │ │ │ ENCODER(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15352,15 +15352,15 @@ │ │ │ │ eoffset-per-angle.N.rfraction float in (default: 0.1) │ │ │ │ Offset amplitude (+/- fraction of radius_ref) │ │ │ │ eoffset-per-angle.N.fmult float in (default: 6) │ │ │ │ Offset frequency multiplier │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 331 │ │ │ │ │ │ │ │ EOFFSET_PER_ANGLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15397,15 +15397,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 332 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ ESTOP_LATCH(9) │ │ │ │ │ │ │ │ @@ -15467,15 +15467,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 333 │ │ │ │ │ │ │ │ FEEDCOMP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15511,15 +15511,15 @@ │ │ │ │ Eric H. Johnson │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 334 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ FILTER_KALMAN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15569,30 +15569,30 @@ │ │ │ │ Estimation of the noise covariances (observation). │ │ │ │ │ │ │ │ AUTHOR │ │ │ │ Dmian Wrobel │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 335 │ │ │ │ │ │ │ │ FILTER_KALMAN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ FILTER_KALMAN (9) │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL-2.0-or-later │ │ │ │ │ │ │ │ 336 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ FLIPFLOP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15625,15 +15625,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 337 │ │ │ │ │ │ │ │ GANTRY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15689,15 +15689,15 @@ │ │ │ │ Charles Steinkuehler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 338 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ GANTRYKINS(9) │ │ │ │ │ │ │ │ Kinematics Module │ │ │ │ │ │ │ │ @@ -15764,15 +15764,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 340 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ GENTRIVKINS(9) │ │ │ │ │ │ │ │ Kernel Developer’s Manual │ │ │ │ │ │ │ │ @@ -15850,15 +15850,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 343 │ │ │ │ │ │ │ │ hal_bb_gpio(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16176,15 +16176,15 @@ │ │ │ │ histobins.N.nbins u32 in (default: 20) │ │ │ │ histobins.N.binsize float in (default: 1) │ │ │ │ histobins.N.minvalue float in (default: 0) │ │ │ │ histobins.N.index s32 in │ │ │ │ │ │ │ │ 350 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HISTOBINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16208,15 +16208,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 351 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ HM2_7I43(9) │ │ │ │ │ │ │ │ @@ -17203,15 +17203,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 369 │ │ │ │ │ │ │ │ HOSTMOT2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -18569,15 +18569,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 397 │ │ │ │ │ │ │ │ ILOWPASS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -18619,15 +18619,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 398 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ INTEG(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -18656,15 +18656,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 399 │ │ │ │ │ │ │ │ INVERT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -18698,15 +18698,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 400 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ JOYHANDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -18750,15 +18750,15 @@ │ │ │ │ Paul Willutzki │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 401 │ │ │ │ │ │ │ │ Kinematics Modules │ │ │ │ │ │ │ │ KINS(9) │ │ │ │ │ │ │ │ @@ -19081,15 +19081,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 408 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LATENCYBINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19144,30 +19144,30 @@ │ │ │ │ latencybins.N.availablebins s32 out (default: 1000) │ │ │ │ │ │ │ │ AUTHOR │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 409 │ │ │ │ │ │ │ │ LATENCYBINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LATENCYBINS(9) │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 410 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LCD(9) │ │ │ │ │ │ │ │ @@ -19331,15 +19331,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 414 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LIMIT2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19368,15 +19368,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 415 │ │ │ │ │ │ │ │ LIMIT3(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19414,15 +19414,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 416 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LIMIT_AXIS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19475,15 +19475,15 @@ │ │ │ │ limit-axis.N.max-limit-MM float in (MM=00..personality) │ │ │ │ The array of macimum limits │ │ │ │ limit-axis.N.min-range-MM float in (MM=00..personality) │ │ │ │ Defines the range of values with which the fb is compared to set the range │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 417 │ │ │ │ │ │ │ │ LIMIT_AXIS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19504,15 +19504,15 @@ │ │ │ │ Chad Woitas │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 418 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LINCURVE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19557,15 +19557,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 419 │ │ │ │ │ │ │ │ LINEARDELTAKINS(9) │ │ │ │ │ │ │ │ Kinematics Component │ │ │ │ │ │ │ │ @@ -19682,15 +19682,15 @@ │ │ │ │ This is a named AND circuit with two inputs and one output. │ │ │ │ loadrt logic names=both personality=0x102 │ │ │ │ addf both servo-thread │ │ │ │ net sig-in-0 => both.in-00 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 421 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LOGIC(9) │ │ │ │ │ │ │ │ @@ -19706,15 +19706,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 422 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LOWPASS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19763,15 +19763,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 423 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LUT5(9) │ │ │ │ │ │ │ │ @@ -19799,15 +19799,15 @@ │ │ │ │ 0xfffffffe. Because every weight except 0x1 is true the function is the sum of every line except the first one. │ │ │ │ A 2-input xor function is TRUE whenever exactly one of the inputs is true, so the correct value for function │ │ │ │ is 0x6. Only in-0 and in-1 should be connected to signals, because if any other bit is TRUE then the output │ │ │ │ will be FALSE. │ │ │ │ │ │ │ │ 424 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LUT5(9) │ │ │ │ │ │ │ │ @@ -20029,15 +20029,15 @@ │ │ │ │ lut5.N.function u32 rw │ │ │ │ │ │ │ │ SEE ALSO │ │ │ │ and(9), logic(9), not(9), or2(9), xor2(9). │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 425 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LUT5(9) │ │ │ │ │ │ │ │ @@ -20047,15 +20047,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 426 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MAJ3(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20083,15 +20083,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 427 │ │ │ │ │ │ │ │ MATCH8(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20132,15 +20132,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 428 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MATRIX_KB(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20265,15 +20265,15 @@ │ │ │ │ max31855.N.fault.M bit out (M=0..( personality & 0xf )) │ │ │ │ Fault condition detected. │ │ │ │ max31855.N.fault-flags.M u32 out (M=0..( personality & 0xf )) │ │ │ │ Fault flags: 0x1 = open sensor, 0x2 short to gnd, 0x3 short to vcc. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 431 │ │ │ │ │ │ │ │ MAX31855(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20283,15 +20283,15 @@ │ │ │ │ Joseph Calderon │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 432 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MESA_7I65(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20334,15 +20334,15 @@ │ │ │ │ Andy Pugh / Cliff Blackburn │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 433 │ │ │ │ │ │ │ │ MESA_PKTGYRO_TEST (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20386,15 +20386,15 @@ │ │ │ │ Boris Skegin │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 434 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MESA_UART (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20440,25 +20440,25 @@ │ │ │ │ Andy Pugh andy@bodgesoc.org │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 435 │ │ │ │ │ │ │ │ MESA_UART (9) │ │ │ │ │ │ │ │ 436 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ MESA_UART (9) │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MESSAGE(9) │ │ │ │ │ │ │ │ @@ -20508,15 +20508,15 @@ │ │ │ │ Les Newell │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL v2 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 437 │ │ │ │ │ │ │ │ MILLTURN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20550,15 +20550,15 @@ │ │ │ │ David Mueller │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 438 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MINMAX(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20584,15 +20584,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 439 │ │ │ │ │ │ │ │ MOTION (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21158,15 +21158,15 @@ │ │ │ │ soft limits are not honored, an offset move may encounter hard limits (or CRASH if there are no limit │ │ │ │ switches). Use of the offset-min-M and offset-max-M inputs to limit travel is recommended. Triggering a │ │ │ │ hard limit will turn off the machine -- see Caution above. │ │ │ │ The offset-in-M values may be set with inifile settings, controlled by a GUI, or managed by other HAL │ │ │ │ │ │ │ │ 452 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MOVEOFF(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21211,15 +21211,15 @@ │ │ │ │ moveoff.N.offset-applied bit out │ │ │ │ TRUE if one or more offsets are applied. │ │ │ │ moveoff.N.waypoint-limit bit out (default: 0) │ │ │ │ Indicates waypoint limit reached (motion ceases), an enabling pin must be deasserted to initiate return to original position. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 453 │ │ │ │ │ │ │ │ MOVEOFF(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21266,15 +21266,15 @@ │ │ │ │ Dewey Garrett and Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 454 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MULT2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21302,15 +21302,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 455 │ │ │ │ │ │ │ │ MULTICLICK (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21359,15 +21359,15 @@ │ │ │ │ │ │ │ │ PARAMETERS │ │ │ │ multiclick.N.invert-input bit rw (default: FALSE) │ │ │ │ If FALSE (the default), clicks start with rising edges. If TRUE, clicks start with falling edges. │ │ │ │ │ │ │ │ 456 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MULTICLICK (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21386,15 +21386,15 @@ │ │ │ │ Sebastian Kuzminsky │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 457 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MULTISWITCH(9) │ │ │ │ │ │ │ │ @@ -21431,15 +21431,15 @@ │ │ │ │ ArcEye schooner30@tiscali.co.uk / Andy Pugh andy@bodgesoc.org │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 458 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MUX16(9) │ │ │ │ │ │ │ │ @@ -21488,30 +21488,30 @@ │ │ │ │ mux2(9), mux4(9), mux8(9), mux_generic(9). │ │ │ │ │ │ │ │ AUTHOR │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 459 │ │ │ │ │ │ │ │ MUX16(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MUX16(9) │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 460 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MUX2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21540,15 +21540,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 461 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MUX4(9) │ │ │ │ │ │ │ │ @@ -21589,15 +21589,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 462 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MUX8(9) │ │ │ │ │ │ │ │ @@ -21651,15 +21651,15 @@ │ │ │ │ Stuart Stevenson │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 463 │ │ │ │ │ │ │ │ MUX_GENERIC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21773,15 +21773,15 @@ │ │ │ │ Chris Radek │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 466 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ NOT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21807,15 +21807,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 467 │ │ │ │ │ │ │ │ OFFSET (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21849,15 +21849,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 468 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ OHMIC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21908,15 +21908,15 @@ │ │ │ │ ohmic.N.ohmic-on bit out │ │ │ │ True if ohmic circuit is closed (material is sensed) │ │ │ │ ohmic.N.ohmic-volts float out │ │ │ │ Calculated ohmic voltage │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 469 │ │ │ │ │ │ │ │ OHMIC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21949,15 +21949,15 @@ │ │ │ │ Rod Webster │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 470 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ONESHOT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22004,15 +22004,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 471 │ │ │ │ │ │ │ │ OPTO_AC5(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22115,15 +22115,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 474 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ORIENT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22172,15 +22172,15 @@ │ │ │ │ orient.N.angle float in │ │ │ │ orient target position in degrees, 0 <= angle < 360 │ │ │ │ orient.N.command float out │ │ │ │ target spindle position, input to PID command │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 475 │ │ │ │ │ │ │ │ ORIENT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22197,15 +22197,15 @@ │ │ │ │ Michael Haberler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 476 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ PID(9) │ │ │ │ │ │ │ │ @@ -22571,15 +22571,15 @@ │ │ │ │ plasmac.arc-voltage-offset float in │ │ │ │ offset to set arc voltage to 0 at 0 volts │ │ │ │ plasmac.arc-voltage-scale float in │ │ │ │ scale to convert arc_voltage input to actual volts │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 483 │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22628,15 +22628,15 @@ │ │ │ │ plasmac.debug-print bit in │ │ │ │ if true will print state changes as a debug aid │ │ │ │ plasmac.external-estop bit in │ │ │ │ external E-stop input │ │ │ │ │ │ │ │ 484 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22685,15 +22685,15 @@ │ │ │ │ plasmac.mesh-arc-ok bit in (default: FALSE) │ │ │ │ don’t require arc ok for mesh mode │ │ │ │ plasmac.mesh-enable bit in │ │ │ │ enable mesh cutting mode │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 485 │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22742,15 +22742,15 @@ │ │ │ │ plasmac.paused-motion-speed float in │ │ │ │ multiplier for speed of motion when paused, from -1 to 1 │ │ │ │ plasmac.pid-d-gain float in │ │ │ │ derivative gain input [mode 0 & mode 1] │ │ │ │ │ │ │ │ 486 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22799,15 +22799,15 @@ │ │ │ │ plasmac.scribe-start bit in │ │ │ │ start a new scribe, connect to spindle.1.on │ │ │ │ plasmac.setup-feed-rate float in │ │ │ │ feed rate for moves to pierce and cut heights (machine units per minute) │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 487 │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22856,15 +22856,15 @@ │ │ │ │ plasmac.voidlock-slope s32 in (default: 500) │ │ │ │ voidlock slope in volts per second │ │ │ │ plasmac.x-offset s32 in │ │ │ │ offset to apply to axis x for consumable change and cut recovery (scaled units) │ │ │ │ │ │ │ │ 488 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22913,15 +22913,15 @@ │ │ │ │ plasmac.offset-scale float out │ │ │ │ offset scale, connect to axis..eoffset-scale │ │ │ │ plasmac.ohmic-enable bit out │ │ │ │ on only while probing │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 489 │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22970,15 +22970,15 @@ │ │ │ │ plasmac.torch-on bit out │ │ │ │ turn torch on, connect to your torch on input │ │ │ │ plasmac.torch-time float out │ │ │ │ torch on time of current job │ │ │ │ │ │ │ │ 490 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23015,15 +23015,15 @@ │ │ │ │ Phillip A Carter & Gregory D Carl │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 491 │ │ │ │ │ │ │ │ PWMGEN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23185,15 +23185,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 495 │ │ │ │ │ │ │ │ HAL User’s Manual │ │ │ │ │ │ │ │ SAMPLER(9) │ │ │ │ │ │ │ │ @@ -23307,15 +23307,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 498 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SCALED_S32_SUMS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23350,15 +23350,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 499 │ │ │ │ │ │ │ │ SELECT8(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23389,15 +23389,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 500 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SERPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23447,15 +23447,15 @@ │ │ │ │ PARAMETERS │ │ │ │ serport.N.pin-3-out-invert bit rw │ │ │ │ serport.N.pin-4-out-invert bit rw │ │ │ │ serport.N.pin-7-out-invert bit rw │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 501 │ │ │ │ │ │ │ │ SERPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23464,15 +23464,15 @@ │ │ │ │ serport.N.ioaddr u32 r │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 502 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SETSERIAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23703,15 +23703,15 @@ │ │ │ │ sim-axis-hardware.N.Zmaxsw-lower float in │ │ │ │ sim-axis-hardware.N.Amaxsw-lower float in │ │ │ │ sim-axis-hardware.N.Umaxsw-lower float in │ │ │ │ sim-axis-hardware.N.Vmaxsw-lower float in │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 507 │ │ │ │ │ │ │ │ SIM_AXIS_HARDWARE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23766,15 +23766,15 @@ │ │ │ │ sim-axis-hardware.N.Xmaxsw-out bit out │ │ │ │ Max limit switch │ │ │ │ sim-axis-hardware.N.Xminsw-out bit out │ │ │ │ min limit switch │ │ │ │ │ │ │ │ 508 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_AXIS_HARDWARE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23831,25 +23831,25 @@ │ │ │ │ sim-axis-hardware.N.Vminsw-homesw-out bit out │ │ │ │ sim-axis-hardware.N.Vbothsw-homesw-out bit out │ │ │ │ sim-axis-hardware.N.limit-offset float in (default: .01) │ │ │ │ how much the limit switches are offset from inputted position. added to max, subtracted from min │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 509 │ │ │ │ │ │ │ │ SIM_AXIS_HARDWARE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ SIM_AXIS_HARDWARE(9) │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ AUTHOR │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ @@ -23970,15 +23970,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 513 │ │ │ │ │ │ │ │ SIM_MATRIX_KB(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24017,15 +24017,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 514 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_PARPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24076,15 +24076,15 @@ │ │ │ │ sim-parport.N.pin-04-out-fake bit out │ │ │ │ sim-parport.N.pin-05-out-fake bit out │ │ │ │ sim-parport.N.pin-06-out-fake bit out │ │ │ │ sim-parport.N.pin-07-out-fake bit out │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 515 │ │ │ │ │ │ │ │ SIM_PARPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24142,15 +24142,15 @@ │ │ │ │ sim-parport.N.pin-03-out-invert bit rw │ │ │ │ sim-parport.N.pin-04-out-invert bit rw │ │ │ │ sim-parport.N.pin-05-out-invert bit rw │ │ │ │ sim-parport.N.pin-06-out-invert bit rw │ │ │ │ │ │ │ │ 516 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_PARPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24179,15 +24179,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 517 │ │ │ │ │ │ │ │ SIM_SPINDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24220,15 +24220,15 @@ │ │ │ │ Michael Haberler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 518 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIMPLE_TP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24263,15 +24263,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 519 │ │ │ │ │ │ │ │ SPHEREPROBE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24304,15 +24304,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 520 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SPINDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24363,15 +24363,15 @@ │ │ │ │ spindle.N.current-gear u32 out │ │ │ │ Currently selected gear. │ │ │ │ spindle.N.at-speed bit out │ │ │ │ TRUE when the spindle is at speed │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 521 │ │ │ │ │ │ │ │ SPINDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24416,15 +24416,15 @@ │ │ │ │ spindle.N.speed-tolerance.x float in │ │ │ │ Tolerance for ’at-speed’ signal (in RPM). Actual spindle speeds within this amount of the commanded speed will cause the at-speed signal to go TRUE. │ │ │ │ spindle.N.zero-tolerance.x float in │ │ │ │ Tolerance for ’zero-speed’ signal (in RPM). │ │ │ │ │ │ │ │ 522 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SPINDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24439,15 +24439,15 @@ │ │ │ │ Les Newell │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 523 │ │ │ │ │ │ │ │ SPINDLE_MONITOR(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24478,15 +24478,15 @@ │ │ │ │ Sebastian Kuzminsky │ │ │ │ │ │ │ │ LICENSE │ │ │ │ gpl v2 or higher │ │ │ │ │ │ │ │ 524 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SSERIAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25183,15 +25183,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 538 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ STREAMER(9) │ │ │ │ │ │ │ │ @@ -25320,15 +25320,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 541 │ │ │ │ │ │ │ │ SUPPLY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25422,15 +25422,15 @@ │ │ │ │ thc.requested-vel float in │ │ │ │ Connect to motion.requested-vel │ │ │ │ thc.volts-requested float in │ │ │ │ Tip Volts current_vel >= min_velocity requested │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 543 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ THC(9) │ │ │ │ │ │ │ │ @@ -25473,15 +25473,15 @@ │ │ │ │ John Thornton │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ 544 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ THCUD(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25525,15 +25525,15 @@ │ │ │ │ net thc-enable thcud.enable <= pyvcp.thc-enable │ │ │ │ │ │ │ │ FUNCTIONS │ │ │ │ thcud (requires a floating-point thread) │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 545 │ │ │ │ │ │ │ │ THCUD(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25577,15 +25577,15 @@ │ │ │ │ John Thornton │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ 546 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ THREADS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25654,15 +25654,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 548 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ TIME(9) │ │ │ │ │ │ │ │ @@ -25716,15 +25716,15 @@ │ │ │ │ loadrt time │ │ │ │ addf time.0 servo-thread │ │ │ │ net cycle-timer │ │ │ │ time.0.start <= halui.program.is-running │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 549 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ TIME(9) │ │ │ │ │ │ │ │ @@ -25770,15 +25770,15 @@ │ │ │ │ John Thornton, itaib, Moses McKnight │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 550 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TIMEDELAY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25808,15 +25808,15 @@ │ │ │ │ Jeff Epler, based on works by Stephen Wille Padnos and John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 551 │ │ │ │ │ │ │ │ TIMEDELTA(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25860,15 +25860,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 552 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ TOF(9) │ │ │ │ │ │ │ │ @@ -25900,15 +25900,15 @@ │ │ │ │ Chad Woitas │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 553 │ │ │ │ │ │ │ │ TOGGLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25941,15 +25941,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 554 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TOGGLE2NIST (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25991,15 +25991,15 @@ │ │ │ │ Anders Wallin │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 555 │ │ │ │ │ │ │ │ TON (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26031,15 +26031,15 @@ │ │ │ │ Chad Woitas │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 556 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ TP(9) │ │ │ │ │ │ │ │ @@ -26071,15 +26071,15 @@ │ │ │ │ Chad Woitas │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 557 │ │ │ │ │ │ │ │ TPCOMP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26114,15 +26114,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 558 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TRISTATE_BIT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26150,15 +26150,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 559 │ │ │ │ │ │ │ │ TRISTATE_FLOAT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26186,15 +26186,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 560 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ UPDOWN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26235,15 +26235,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 561 │ │ │ │ │ │ │ │ USERKINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26298,15 +26298,15 @@ │ │ │ │ the halcompile utility but it is not accessible to kinematics │ │ │ │ functions. │ │ │ │ 2 Hal pins and parameters needed in kinematics functions │ │ │ │ (kinematicsForward(), kinematicsInverse()) must │ │ │ │ │ │ │ │ 562 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ USERKINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26326,15 +26326,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 563 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ WATCHDOG(9) │ │ │ │ │ │ │ │ @@ -26417,15 +26417,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 565 │ │ │ │ │ │ │ │ WEIGHTED_SUM(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26525,15 +26525,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 567 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ XOR2(9) │ │ │ │ │ │ │ │ @@ -26566,15 +26566,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 568 │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ XYZAB_TDR_KINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26606,12 +26606,12 @@ │ │ │ │ David Mueller │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-04-13 │ │ │ │ +2025-08-21 │ │ │ │ │ │ │ │ 569