--- /srv/rebuilderd/tmp/rebuilderduf1Isu/inputs/linuxcnc-doc-en_2.9.7-1_all.deb +++ /srv/rebuilderd/tmp/rebuilderduf1Isu/out/linuxcnc-doc-en_2.9.7-1_all.deb ├── file list │ @@ -1,3 +1,3 @@ │ -rw-r--r-- 0 0 0 4 2025-10-22 22:43:13.000000 debian-binary │ -rw-r--r-- 0 0 0 1392 2025-10-22 22:43:13.000000 control.tar.xz │ --rw-r--r-- 0 0 0 27466728 2025-10-22 22:43:13.000000 data.tar.xz │ +-rw-r--r-- 0 0 0 27466796 2025-10-22 22:43:13.000000 data.tar.xz ├── control.tar.xz │ ├── control.tar │ │ ├── ./md5sums │ │ │ ├── ./md5sums │ │ │ │┄ Files differ ├── data.tar.xz │ ├── data.tar │ │ ├── file list │ │ │ @@ -11,15 +11,15 @@ │ │ │ drwxr-xr-x 0 root (0) root (0) 0 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/ │ │ │ -rw-r--r-- 0 root (0) root (0) 1081 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/AUTHORS │ │ │ -rw-r--r-- 0 root (0) root (0) 1884 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/INSTALL.adoc.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 843272 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Developer.pdf │ │ │ -rw-r--r-- 0 root (0) root (0) 26341369 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Documentation.pdf │ │ │ -rw-r--r-- 0 root (0) root (0) 491044 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Getting_Started.pdf │ │ │ -rw-r--r-- 0 root (0) root (0) 150080 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Integrator.pdf │ │ │ --rw-r--r-- 0 root (0) root (0) 1159464 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Manual_Pages.pdf │ │ │ +-rw-r--r-- 0 root (0) root (0) 1159396 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Manual_Pages.pdf │ │ │ -rw-r--r-- 0 root (0) root (0) 3759 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/README.adoc.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1529 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/README.axis │ │ │ -rw-r--r-- 0 root (0) root (0) 506 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/axis_light_background │ │ │ -rw-r--r-- 0 root (0) root (0) 14664 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/gcode.html │ │ │ -rw-r--r-- 0 root (0) root (0) 1868 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/rtfaults.adoc │ │ │ -rw-r--r-- 0 root (0) root (0) 5504 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc/tklinuxcnc.adoc.gz │ │ │ drwxr-xr-x 0 root (0) root (0) 0 2025-10-22 22:43:13.000000 ./usr/share/doc/linuxcnc-doc-en/ │ │ ├── ./usr/share/doc/linuxcnc/LinuxCNC_Documentation.pdf │ │ │┄ Command `'dumppdf -at {}'` failed with exit code 1. Standard output: │ │ │┄ Traceback (most recent call last): │ │ │┄ File "/usr/bin/dumppdf", line 473, in │ │ │┄ main() │ │ │┄ ~~~~^^ │ │ │┄ File "/usr/bin/dumppdf", line 457, in main │ │ │┄ dumppdf( │ │ │┄ ~~~~~~~^ │ │ │┄ outfp, │ │ │┄ [...] │ │ │ @@ -683554,19 +683554,19 @@ │ │ │ 00a6e210: 6666 6666 3e5d 2f4d 6173 6b5b 3020 305d ffff>]/Mask[0 0] │ │ │ 00a6e220: 2f54 7970 652f 584f 626a 6563 742f 5375 /Type/XObject/Su │ │ │ 00a6e230: 6274 7970 652f 496d 6167 652f 5769 6474 btype/Image/Widt │ │ │ 00a6e240: 680a 3138 2f48 6569 6768 7420 3139 2f42 h.18/Height 19/B │ │ │ 00a6e250: 6974 7350 6572 436f 6d70 6f6e 656e 7420 itsPerComponent │ │ │ 00a6e260: 312f 4669 6c74 6572 2f46 6c61 7465 4465 1/Filter/FlateDe │ │ │ 00a6e270: 636f 6465 2f4c 656e 6774 6820 3634 3e3e code/Length 64>> │ │ │ -00a6e280: 0a73 7472 6561 6d0a 78da 6bfc 20e7 e733 .stream.x.k. ..3 │ │ │ +00a6e280: 0a73 7472 6561 6d0a 78da 6bfc a0eb e733 .stream.x.k....3 │ │ │ 00a6e290: d5c0 9901 883c 5c19 5c3c 6635 0504 3626 .....<\.\1} │ │ │ -00a6e2c0: cd0f ec01 83a3 16af 0a65 6e64 7374 7265 .........endstre │ │ │ +00a6e2c0: cd0f ec01 86dc 16be 0a65 6e64 7374 7265 .........endstre │ │ │ 00a6e2d0: 616d 0a65 6e64 6f62 6a0a 3530 3439 2030 am.endobj.5049 0 │ │ │ 00a6e2e0: 206f 626a 0a3c 3c2f 4669 6c74 6572 2f46 obj.<>.stream. │ │ │ 00a6e310: 78da ad5a cb8e 23bb 0ddd e72b ea07 5a57 x..Z..#....+..ZW │ │ │ 00a6e320: 0f52 0fc0 e845 90e4 22d9 dd64 7641 166e .R...E.."..dvA.n │ │ │ 00a6e330: 4f3b 9b0c 82c9 26bf 1f3d 4889 aa87 cb9e O;....&..=H..... │ │ ├── ./usr/share/doc/linuxcnc/LinuxCNC_Manual_Pages.pdf │ │ │ ├── pdftotext {} - │ │ │ │ @@ -6529,15 +6529,15 @@ │ │ │ │ Modbus slave address │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ 134 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ pmx485-test(1) │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ @@ -8228,15 +8228,15 @@ │ │ │ │ Computed resistance of the thermistor. │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 175 │ │ │ │ │ │ │ │ tool_mmap_read(1) │ │ │ │ │ │ │ │ The Enhanced Machine Controller │ │ │ │ │ │ │ │ @@ -8848,15 +8848,15 @@ │ │ │ │ Modbus slave address │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ 188 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ XHC-HB04-ACCELS(1) │ │ │ │ │ │ │ │ The Enhanced Machine Controller │ │ │ │ │ │ │ │ @@ -13199,15 +13199,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 282 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ABS_S32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13238,15 +13238,15 @@ │ │ │ │ Sebastian Kuzminsky │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 283 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ AND2(9) │ │ │ │ │ │ │ │ @@ -13278,15 +13278,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 284 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ANGLEJOG(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13330,15 +13330,15 @@ │ │ │ │ anglejog.N.max-vel float in │ │ │ │ vector max velocity magnitude │ │ │ │ anglejog.N.max-accel float in │ │ │ │ vector max acceleration magnitude │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 285 │ │ │ │ │ │ │ │ ANGLEJOG(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13373,15 +13373,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 286 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ AT_PID(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13449,15 +13449,15 @@ │ │ │ │ Chris S. Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 288 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BIN2GRAY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13485,15 +13485,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 289 │ │ │ │ │ │ │ │ BIQUAD(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13547,15 +13547,15 @@ │ │ │ │ biquad.N.n1 float rw (default: 0.0) │ │ │ │ 1st-delayed numerator coef │ │ │ │ biquad.N.n2 float rw (default: 0.0) │ │ │ │ 2nd-delayed numerator coef │ │ │ │ │ │ │ │ 290 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BIQUAD(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13565,15 +13565,15 @@ │ │ │ │ Peter G. Vavaroutsos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 291 │ │ │ │ │ │ │ │ BITSLICE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13602,15 +13602,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL2+ │ │ │ │ │ │ │ │ 292 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BITWISE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13647,15 +13647,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL 2+ │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 293 │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13697,15 +13697,15 @@ │ │ │ │ H Emulated Hall sensor output. This mode can be used to control a drive which expects 3x Hall signals, or │ │ │ │ to convert between a motor with one hall pattern and a drive which expects a different one. │ │ │ │ F Emulated Fanuc Red Cap Gray-code encoder output. This mode might be used to drive a non-Fanuc motor using a Fanuc drive intended for the "Red-Cap" motors. │ │ │ │ T Force Trapezoidal mode. │ │ │ │ │ │ │ │ 294 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13752,15 +13752,15 @@ │ │ │ │ bldc.N.C8 bit in [if ( personality & 0x10 )] │ │ │ │ Fanuc Gray-code bit 3 input │ │ │ │ bldc.N.value float in │ │ │ │ PWM master amplitude input │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 295 │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13807,15 +13807,15 @@ │ │ │ │ bldc.N.A-high float out [if ( personality & 0xF00 ) == 0x200] │ │ │ │ High-side driver for phase A │ │ │ │ bldc.N.B-high float out [if ( personality & 0xF00 ) == 0x200] │ │ │ │ High-side driver for phase B │ │ │ │ │ │ │ │ 296 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13864,15 +13864,15 @@ │ │ │ │ offset such as the 8I20. This value has a range of 0 to 1 and measures electrical revolutions. It will │ │ │ │ have two zeros for a 4 pole motor, three for a 6-pole, etc. │ │ │ │ bldc.N.out float out │ │ │ │ Current output, including the effect of the dir pin and the alignment sequence. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 297 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ @@ -13909,15 +13909,15 @@ │ │ │ │ Bodine). 22 (240 degree). 25 (60 degree commutation). │ │ │ │ Note that a number of incorrect commutations will have non-zero net torque which might look as │ │ │ │ if they work, but don’t really. │ │ │ │ If your motor lacks documentation it might be worth trying every pattern. │ │ │ │ │ │ │ │ 298 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ @@ -14217,15 +14217,15 @@ │ │ │ │ 001 │ │ │ │ 101 │ │ │ │ 011 │ │ │ │ 001 │ │ │ │ 000 │ │ │ │ 100 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ B-C │ │ │ │ 100 │ │ │ │ 101 │ │ │ │ 100 │ │ │ │ @@ -14287,15 +14287,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 300 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BLEND(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14329,15 +14329,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 301 │ │ │ │ │ │ │ │ CAROUSEL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14381,15 +14381,15 @@ │ │ │ │ and ’edge’ mode this is when both the index and pulse inputs are true. In ’counts’ mode only the index input needs to be set to set home. Additionally in ’counts’ mode the usual index-enable logic of the encoder │ │ │ │ counters is supported. │ │ │ │ With some carousel designs the carousel will not stop immediately. To allow for this set the align-dc pin to │ │ │ │ a low velocity to be used for a final latching move, and set the decel-time to a suitable value. Once the │ │ │ │ │ │ │ │ 302 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CAROUSEL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14437,15 +14437,15 @@ │ │ │ │ and sense-1 is the pocket sensor. │ │ │ │ carousel.N.rev-pulse float in │ │ │ │ The duration in seconds for which a ratchet changer (Boxford, Emco) should pulse the reverse pin │ │ │ │ to lock the holder │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 303 │ │ │ │ │ │ │ │ CAROUSEL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14495,15 +14495,15 @@ │ │ │ │ │ │ │ │ PARAMETERS │ │ │ │ carousel.N.state s32 r (default: 0) │ │ │ │ Current component state │ │ │ │ │ │ │ │ 304 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CAROUSEL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14527,15 +14527,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 305 │ │ │ │ │ │ │ │ CHARGE_PUMP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14571,15 +14571,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 306 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CLARKE2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14617,15 +14617,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 307 │ │ │ │ │ │ │ │ CLARKE3(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14664,15 +14664,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 308 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CLARKEINV (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14710,15 +14710,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 309 │ │ │ │ │ │ │ │ CLASSICLADDER(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14834,15 +14834,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 312 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONSTANT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14867,15 +14867,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 313 │ │ │ │ │ │ │ │ CONV_BIT_FLOAT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14899,15 +14899,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 314 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_BIT_S32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14931,15 +14931,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 315 │ │ │ │ │ │ │ │ CONV_BIT_U32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14963,15 +14963,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 316 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_FLOAT_S32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15001,15 +15001,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 317 │ │ │ │ │ │ │ │ CONV_FLOAT_U32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15039,15 +15039,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 318 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_S32_BIT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15077,15 +15077,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 319 │ │ │ │ │ │ │ │ CONV_S32_FLOAT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15109,15 +15109,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 320 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_S32_U32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15147,15 +15147,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 321 │ │ │ │ │ │ │ │ CONV_U32_BIT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15185,15 +15185,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 322 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_U32_FLOAT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15217,15 +15217,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 323 │ │ │ │ │ │ │ │ CONV_U32_S32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15255,15 +15255,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 324 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ COREXY_BY_HAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15307,15 +15307,15 @@ │ │ │ │ corexy-by-hal.N.alpha-cmd float out │ │ │ │ typ: command to alpha motor │ │ │ │ corexy-by-hal.N.beta-cmd float out │ │ │ │ typ: command to beta ts motor │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 325 │ │ │ │ │ │ │ │ COREXY_BY_HAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15325,15 +15325,15 @@ │ │ │ │ Dewey Garrett based on forum post from nbremond │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 326 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ COUNTER(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15414,15 +15414,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 328 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ DDT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15454,15 +15454,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 329 │ │ │ │ │ │ │ │ DEADZONE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15492,15 +15492,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 330 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ DEBOUNCE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15585,15 +15585,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL 2+ │ │ │ │ │ │ │ │ 332 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ DIFFERENTIAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15630,15 +15630,15 @@ │ │ │ │ Sebastian Kuzminsky │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 333 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ DIV2(9) │ │ │ │ │ │ │ │ @@ -15677,15 +15677,15 @@ │ │ │ │ Noel Rodes │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 334 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ EDGE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15723,15 +15723,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 335 │ │ │ │ │ │ │ │ ENCODER(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16070,15 +16070,15 @@ │ │ │ │ eoffset-per-angle.N.rfraction float in (default: 0.1) │ │ │ │ Offset amplitude (+/- fraction of radius_ref) │ │ │ │ eoffset-per-angle.N.fmult float in (default: 6) │ │ │ │ Offset frequency multiplier │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 343 │ │ │ │ │ │ │ │ EOFFSET_PER_ANGLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16115,15 +16115,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 344 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ ESTOP_LATCH(9) │ │ │ │ │ │ │ │ @@ -16185,15 +16185,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 345 │ │ │ │ │ │ │ │ FEEDCOMP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16229,15 +16229,15 @@ │ │ │ │ Eric H. Johnson │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 346 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ FILTER_KALMAN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16287,30 +16287,30 @@ │ │ │ │ Estimation of the noise covariances (observation). │ │ │ │ │ │ │ │ AUTHOR │ │ │ │ Dmian Wrobel │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 347 │ │ │ │ │ │ │ │ FILTER_KALMAN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ FILTER_KALMAN (9) │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL-2.0-or-later │ │ │ │ │ │ │ │ 348 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ FLIPFLOP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16343,15 +16343,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 349 │ │ │ │ │ │ │ │ GANTRY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16402,15 +16402,15 @@ │ │ │ │ gantry.N.position-fb float out │ │ │ │ Position feedback to motion │ │ │ │ gantry.N.home bit out │ │ │ │ Combined home signal, true if all joint home inputs are true. │ │ │ │ │ │ │ │ 350 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ GANTRY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16425,15 +16425,15 @@ │ │ │ │ Charles Steinkuehler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 351 │ │ │ │ │ │ │ │ GANTRYKINS(9) │ │ │ │ │ │ │ │ Kinematics Module │ │ │ │ │ │ │ │ @@ -16500,15 +16500,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 353 │ │ │ │ │ │ │ │ GENTRIVKINS(9) │ │ │ │ │ │ │ │ Kernel Developer’s Manual │ │ │ │ │ │ │ │ @@ -16586,15 +16586,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 356 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ hal_bb_gpio(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16912,15 +16912,15 @@ │ │ │ │ histobins.N.nbins u32 in (default: 20) │ │ │ │ histobins.N.binsize float in (default: 1) │ │ │ │ histobins.N.minvalue float in (default: 0) │ │ │ │ histobins.N.index s32 in │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 363 │ │ │ │ │ │ │ │ HISTOBINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16944,15 +16944,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 364 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ HM2_7I43(9) │ │ │ │ │ │ │ │ @@ -18137,15 +18137,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 386 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HOSTMOT2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19503,15 +19503,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 414 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ILOWPASS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19553,15 +19553,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 415 │ │ │ │ │ │ │ │ INTEG(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19590,15 +19590,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 416 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ INVERT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19632,15 +19632,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 417 │ │ │ │ │ │ │ │ JOYHANDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19684,15 +19684,15 @@ │ │ │ │ Paul Willutzki │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 418 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ Kinematics Modules │ │ │ │ │ │ │ │ KINS(9) │ │ │ │ │ │ │ │ @@ -20015,15 +20015,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 425 │ │ │ │ │ │ │ │ LATENCYBINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20078,30 +20078,30 @@ │ │ │ │ latencybins.N.availablebins s32 out (default: 1000) │ │ │ │ │ │ │ │ AUTHOR │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ 426 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LATENCYBINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LATENCYBINS(9) │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 427 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LCD(9) │ │ │ │ │ │ │ │ @@ -20265,15 +20265,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 431 │ │ │ │ │ │ │ │ LIMIT2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20302,15 +20302,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 432 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LIMIT3(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20348,15 +20348,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 433 │ │ │ │ │ │ │ │ LIMIT_AXIS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20409,15 +20409,15 @@ │ │ │ │ limit-axis.N.max-limit-MM float in (MM=00..personality) │ │ │ │ The array of macimum limits │ │ │ │ limit-axis.N.min-range-MM float in (MM=00..personality) │ │ │ │ Defines the range of values with which the fb is compared to set the range │ │ │ │ │ │ │ │ 434 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LIMIT_AXIS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20438,15 +20438,15 @@ │ │ │ │ Chad Woitas │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 435 │ │ │ │ │ │ │ │ LINCURVE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20491,15 +20491,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 436 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LINEARDELTAKINS(9) │ │ │ │ │ │ │ │ Kinematics Component │ │ │ │ │ │ │ │ @@ -20616,15 +20616,15 @@ │ │ │ │ This is a named AND circuit with two inputs and one output. │ │ │ │ loadrt logic names=both personality=0x102 │ │ │ │ addf both servo-thread │ │ │ │ net sig-in-0 => both.in-00 │ │ │ │ │ │ │ │ 438 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LOGIC(9) │ │ │ │ │ │ │ │ @@ -20640,15 +20640,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 439 │ │ │ │ │ │ │ │ LOWPASS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20697,15 +20697,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 440 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LUT5(9) │ │ │ │ │ │ │ │ @@ -20733,15 +20733,15 @@ │ │ │ │ 0xfffffffe. Because every weight except 0x1 is true the function is the sum of every line except the first one. │ │ │ │ A 2-input xor function is TRUE whenever exactly one of the inputs is true, so the correct value for function │ │ │ │ is 0x6. Only in-0 and in-1 should be connected to signals, because if any other bit is TRUE then the output │ │ │ │ will be FALSE. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 441 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LUT5(9) │ │ │ │ │ │ │ │ @@ -20963,15 +20963,15 @@ │ │ │ │ lut5.N.function u32 rw │ │ │ │ │ │ │ │ SEE ALSO │ │ │ │ and(9), logic(9), not(9), or2(9), xor2(9). │ │ │ │ │ │ │ │ 442 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LUT5(9) │ │ │ │ │ │ │ │ @@ -20981,15 +20981,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 443 │ │ │ │ │ │ │ │ MAJ3(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21017,15 +21017,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 444 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MATCH8(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21066,15 +21066,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 445 │ │ │ │ │ │ │ │ MATRIX_KB(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21199,15 +21199,15 @@ │ │ │ │ max31855.N.fault.M bit out (M=0..( personality & 0xf )) │ │ │ │ Fault condition detected. │ │ │ │ max31855.N.fault-flags.M u32 out (M=0..( personality & 0xf )) │ │ │ │ Fault flags: 0x1 = open sensor, 0x2 short to gnd, 0x3 short to vcc. │ │ │ │ │ │ │ │ 448 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MAX31855(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21217,15 +21217,15 @@ │ │ │ │ Joseph Calderon │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 449 │ │ │ │ │ │ │ │ MESA_7I65(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21268,15 +21268,15 @@ │ │ │ │ Andy Pugh / Cliff Blackburn │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 450 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MESA_PKTGYRO_TEST (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21320,15 +21320,15 @@ │ │ │ │ Boris Skegin │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 451 │ │ │ │ │ │ │ │ MESA_UART (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21374,25 +21374,25 @@ │ │ │ │ Andy Pugh andy@bodgesoc.org │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 452 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MESA_UART (9) │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ MESA_UART (9) │ │ │ │ │ │ │ │ 453 │ │ │ │ │ │ │ │ MESSAGE(9) │ │ │ │ │ │ │ │ @@ -21442,15 +21442,15 @@ │ │ │ │ Les Newell │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL v2 │ │ │ │ │ │ │ │ 454 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MILLTURN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21484,15 +21484,15 @@ │ │ │ │ David Mueller │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 455 │ │ │ │ │ │ │ │ MINMAX(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21518,15 +21518,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 456 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MOTION (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22092,15 +22092,15 @@ │ │ │ │ soft limits are not honored, an offset move may encounter hard limits (or CRASH if there are no limit │ │ │ │ switches). Use of the offset-min-M and offset-max-M inputs to limit travel is recommended. Triggering a │ │ │ │ hard limit will turn off the machine -- see Caution above. │ │ │ │ The offset-in-M values may be set with inifile settings, controlled by a GUI, or managed by other HAL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 469 │ │ │ │ │ │ │ │ MOVEOFF(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22145,15 +22145,15 @@ │ │ │ │ moveoff.N.offset-applied bit out │ │ │ │ TRUE if one or more offsets are applied. │ │ │ │ moveoff.N.waypoint-limit bit out (default: 0) │ │ │ │ Indicates waypoint limit reached (motion ceases), an enabling pin must be deasserted to initiate return to original position. │ │ │ │ │ │ │ │ 470 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MOVEOFF(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22200,15 +22200,15 @@ │ │ │ │ Dewey Garrett and Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 471 │ │ │ │ │ │ │ │ MULT2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22236,15 +22236,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 472 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MULTICLICK (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22293,15 +22293,15 @@ │ │ │ │ │ │ │ │ PARAMETERS │ │ │ │ multiclick.N.invert-input bit rw (default: FALSE) │ │ │ │ If FALSE (the default), clicks start with rising edges. If TRUE, clicks start with falling edges. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 473 │ │ │ │ │ │ │ │ MULTICLICK (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22320,15 +22320,15 @@ │ │ │ │ Sebastian Kuzminsky │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 474 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MULTISWITCH(9) │ │ │ │ │ │ │ │ @@ -22365,15 +22365,15 @@ │ │ │ │ ArcEye schooner30@tiscali.co.uk / Andy Pugh andy@bodgesoc.org │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 475 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MUX16(9) │ │ │ │ │ │ │ │ @@ -22422,30 +22422,30 @@ │ │ │ │ mux2(9), mux4(9), mux8(9), mux_generic(9). │ │ │ │ │ │ │ │ AUTHOR │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ 476 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MUX16(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MUX16(9) │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 477 │ │ │ │ │ │ │ │ MUX2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22474,15 +22474,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 478 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MUX4(9) │ │ │ │ │ │ │ │ @@ -22523,15 +22523,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 479 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MUX8(9) │ │ │ │ │ │ │ │ @@ -22585,15 +22585,15 @@ │ │ │ │ Stuart Stevenson │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 480 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MUX_GENERIC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22707,15 +22707,15 @@ │ │ │ │ Chris Radek │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 483 │ │ │ │ │ │ │ │ NOT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22741,15 +22741,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 484 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ OFFSET (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22783,15 +22783,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 485 │ │ │ │ │ │ │ │ OHMIC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22842,15 +22842,15 @@ │ │ │ │ ohmic.N.ohmic-on bit out │ │ │ │ True if ohmic circuit is closed (material is sensed) │ │ │ │ ohmic.N.ohmic-volts float out │ │ │ │ Calculated ohmic voltage │ │ │ │ │ │ │ │ 486 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ OHMIC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22883,15 +22883,15 @@ │ │ │ │ Rod Webster │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 487 │ │ │ │ │ │ │ │ ONESHOT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22938,15 +22938,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 488 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ OPTO_AC5(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23049,15 +23049,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 491 │ │ │ │ │ │ │ │ ORIENT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23106,15 +23106,15 @@ │ │ │ │ orient.N.angle float in │ │ │ │ orient target position in degrees, 0 <= angle < 360 │ │ │ │ orient.N.command float out │ │ │ │ target spindle position, input to PID command │ │ │ │ │ │ │ │ 492 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ORIENT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23131,15 +23131,15 @@ │ │ │ │ Michael Haberler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 493 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ PID(9) │ │ │ │ │ │ │ │ @@ -23505,15 +23505,15 @@ │ │ │ │ plasmac.arc-voltage-offset float in │ │ │ │ offset to set arc voltage to 0 at 0 volts │ │ │ │ plasmac.arc-voltage-scale float in │ │ │ │ scale to convert arc_voltage input to actual volts │ │ │ │ │ │ │ │ 500 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23562,15 +23562,15 @@ │ │ │ │ plasmac.debug-print bit in │ │ │ │ if true will print state changes as a debug aid │ │ │ │ plasmac.external-estop bit in │ │ │ │ external E-stop input │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 501 │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23619,15 +23619,15 @@ │ │ │ │ plasmac.mesh-arc-ok bit in (default: FALSE) │ │ │ │ don’t require arc ok for mesh mode │ │ │ │ plasmac.mesh-enable bit in │ │ │ │ enable mesh cutting mode │ │ │ │ │ │ │ │ 502 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23676,15 +23676,15 @@ │ │ │ │ plasmac.paused-motion-speed float in │ │ │ │ multiplier for speed of motion when paused, from -1 to 1 │ │ │ │ plasmac.pid-d-gain float in │ │ │ │ derivative gain input [mode 0 & mode 1] │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 503 │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23733,15 +23733,15 @@ │ │ │ │ plasmac.scribe-start bit in │ │ │ │ start a new scribe, connect to spindle.1.on │ │ │ │ plasmac.setup-feed-rate float in │ │ │ │ feed rate for moves to pierce and cut heights (machine units per minute) │ │ │ │ │ │ │ │ 504 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23790,15 +23790,15 @@ │ │ │ │ plasmac.voidlock-slope s32 in (default: 500) │ │ │ │ voidlock slope in volts per second │ │ │ │ plasmac.x-offset s32 in │ │ │ │ offset to apply to axis x for consumable change and cut recovery (scaled units) │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 505 │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23847,15 +23847,15 @@ │ │ │ │ plasmac.offset-scale float out │ │ │ │ offset scale, connect to axis..eoffset-scale │ │ │ │ plasmac.ohmic-enable bit out │ │ │ │ on only while probing │ │ │ │ │ │ │ │ 506 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23904,15 +23904,15 @@ │ │ │ │ plasmac.torch-on bit out │ │ │ │ turn torch on, connect to your torch on input │ │ │ │ plasmac.torch-time float out │ │ │ │ torch on time of current job │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 507 │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23949,15 +23949,15 @@ │ │ │ │ Phillip A Carter & Gregory D Carl │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ 508 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PWMGEN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24119,15 +24119,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 512 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL User’s Manual │ │ │ │ │ │ │ │ SAMPLER(9) │ │ │ │ │ │ │ │ @@ -24241,15 +24241,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 515 │ │ │ │ │ │ │ │ SCALED_S32_SUMS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24284,15 +24284,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 516 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SELECT8(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24323,15 +24323,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 517 │ │ │ │ │ │ │ │ SERPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24381,15 +24381,15 @@ │ │ │ │ PARAMETERS │ │ │ │ serport.N.pin-3-out-invert bit rw │ │ │ │ serport.N.pin-4-out-invert bit rw │ │ │ │ serport.N.pin-7-out-invert bit rw │ │ │ │ │ │ │ │ 518 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SERPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24398,15 +24398,15 @@ │ │ │ │ serport.N.ioaddr u32 r │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 519 │ │ │ │ │ │ │ │ SETSERIAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24637,15 +24637,15 @@ │ │ │ │ sim-axis-hardware.N.Zmaxsw-lower float in │ │ │ │ sim-axis-hardware.N.Amaxsw-lower float in │ │ │ │ sim-axis-hardware.N.Umaxsw-lower float in │ │ │ │ sim-axis-hardware.N.Vmaxsw-lower float in │ │ │ │ │ │ │ │ 524 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_AXIS_HARDWARE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24700,15 +24700,15 @@ │ │ │ │ sim-axis-hardware.N.Xmaxsw-out bit out │ │ │ │ Max limit switch │ │ │ │ sim-axis-hardware.N.Xminsw-out bit out │ │ │ │ min limit switch │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 525 │ │ │ │ │ │ │ │ SIM_AXIS_HARDWARE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24765,15 +24765,15 @@ │ │ │ │ sim-axis-hardware.N.Vminsw-homesw-out bit out │ │ │ │ sim-axis-hardware.N.Vbothsw-homesw-out bit out │ │ │ │ sim-axis-hardware.N.limit-offset float in (default: .01) │ │ │ │ how much the limit switches are offset from inputted position. added to max, subtracted from min │ │ │ │ │ │ │ │ 526 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_AXIS_HARDWARE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24783,15 +24783,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 527 │ │ │ │ │ │ │ │ SIM_ENCODER(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24904,15 +24904,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 530 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_MATRIX_KB(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24951,15 +24951,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 531 │ │ │ │ │ │ │ │ SIM_PARPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25010,15 +25010,15 @@ │ │ │ │ sim-parport.N.pin-04-out-fake bit out │ │ │ │ sim-parport.N.pin-05-out-fake bit out │ │ │ │ sim-parport.N.pin-06-out-fake bit out │ │ │ │ sim-parport.N.pin-07-out-fake bit out │ │ │ │ │ │ │ │ 532 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_PARPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25076,15 +25076,15 @@ │ │ │ │ sim-parport.N.pin-03-out-invert bit rw │ │ │ │ sim-parport.N.pin-04-out-invert bit rw │ │ │ │ sim-parport.N.pin-05-out-invert bit rw │ │ │ │ sim-parport.N.pin-06-out-invert bit rw │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 533 │ │ │ │ │ │ │ │ SIM_PARPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25113,15 +25113,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 534 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_SPINDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25154,15 +25154,15 @@ │ │ │ │ Michael Haberler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 535 │ │ │ │ │ │ │ │ SIMPLE_TP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25197,15 +25197,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 536 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SPHEREPROBE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25238,15 +25238,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 537 │ │ │ │ │ │ │ │ SPINDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25297,15 +25297,15 @@ │ │ │ │ spindle.N.current-gear u32 out │ │ │ │ Currently selected gear. │ │ │ │ spindle.N.at-speed bit out │ │ │ │ TRUE when the spindle is at speed │ │ │ │ │ │ │ │ 538 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SPINDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25350,15 +25350,15 @@ │ │ │ │ spindle.N.speed-tolerance.x float in │ │ │ │ Tolerance for ’at-speed’ signal (in RPM). Actual spindle speeds within this amount of the commanded speed will cause the at-speed signal to go TRUE. │ │ │ │ spindle.N.zero-tolerance.x float in │ │ │ │ Tolerance for ’zero-speed’ signal (in RPM). │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 539 │ │ │ │ │ │ │ │ SPINDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25373,15 +25373,15 @@ │ │ │ │ Les Newell │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 540 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SPINDLE_MONITOR(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25412,15 +25412,15 @@ │ │ │ │ Sebastian Kuzminsky │ │ │ │ │ │ │ │ LICENSE │ │ │ │ gpl v2 or higher │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 541 │ │ │ │ │ │ │ │ SSERIAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26117,15 +26117,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 555 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ STREAMER(9) │ │ │ │ │ │ │ │ @@ -26254,15 +26254,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 558 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SUPPLY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26356,15 +26356,15 @@ │ │ │ │ thc.requested-vel float in │ │ │ │ Connect to motion.requested-vel │ │ │ │ thc.volts-requested float in │ │ │ │ Tip Volts current_vel >= min_velocity requested │ │ │ │ │ │ │ │ 560 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ THC(9) │ │ │ │ │ │ │ │ @@ -26407,15 +26407,15 @@ │ │ │ │ John Thornton │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 561 │ │ │ │ │ │ │ │ THCUD(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26459,15 +26459,15 @@ │ │ │ │ net thc-enable thcud.enable <= pyvcp.thc-enable │ │ │ │ │ │ │ │ FUNCTIONS │ │ │ │ thcud (requires a floating-point thread) │ │ │ │ │ │ │ │ 562 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ THCUD(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26511,15 +26511,15 @@ │ │ │ │ John Thornton │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 563 │ │ │ │ │ │ │ │ THREADS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26588,15 +26588,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 565 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ TIME(9) │ │ │ │ │ │ │ │ @@ -26650,15 +26650,15 @@ │ │ │ │ loadrt time │ │ │ │ addf time.0 servo-thread │ │ │ │ net cycle-timer │ │ │ │ time.0.start <= halui.program.is-running │ │ │ │ │ │ │ │ 566 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ TIME(9) │ │ │ │ │ │ │ │ @@ -26704,15 +26704,15 @@ │ │ │ │ John Thornton, itaib, Moses McKnight │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 567 │ │ │ │ │ │ │ │ TIMEDELAY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26742,15 +26742,15 @@ │ │ │ │ Jeff Epler, based on works by Stephen Wille Padnos and John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 568 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TIMEDELTA(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26794,15 +26794,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 569 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ TOF(9) │ │ │ │ │ │ │ │ @@ -26834,15 +26834,15 @@ │ │ │ │ Chad Woitas │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 570 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TOGGLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26875,15 +26875,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 571 │ │ │ │ │ │ │ │ TOGGLE2NIST (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26925,15 +26925,15 @@ │ │ │ │ Anders Wallin │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 572 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TON (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26965,15 +26965,15 @@ │ │ │ │ Chad Woitas │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 573 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ TP(9) │ │ │ │ │ │ │ │ @@ -27005,15 +27005,15 @@ │ │ │ │ Chad Woitas │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 574 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TPCOMP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27048,15 +27048,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 575 │ │ │ │ │ │ │ │ TRISTATE_BIT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27084,15 +27084,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 576 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TRISTATE_FLOAT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27120,15 +27120,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 577 │ │ │ │ │ │ │ │ UPDOWN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27169,15 +27169,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 578 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ USERKINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27232,15 +27232,15 @@ │ │ │ │ the halcompile utility but it is not accessible to kinematics │ │ │ │ functions. │ │ │ │ 2 Hal pins and parameters needed in kinematics functions │ │ │ │ (kinematicsForward(), kinematicsInverse()) must │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 579 │ │ │ │ │ │ │ │ USERKINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27260,15 +27260,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 580 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ WATCHDOG(9) │ │ │ │ │ │ │ │ @@ -27351,15 +27351,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 582 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ WEIGHTED_SUM(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27459,15 +27459,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 584 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ XOR2(9) │ │ │ │ │ │ │ │ @@ -27500,15 +27500,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ 585 │ │ │ │ │ │ │ │ XYZAB_TDR_KINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27540,12 +27540,12 @@ │ │ │ │ David Mueller │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 586 │ │ │ │ │ │ │ │ -2025-11-03 │ │ │ │ +2025-12-30 │ │ │ │ │ │ │ │ LinuxCNC Documentation