--- /srv/rebuilderd/tmp/rebuilderdUnCtRg/inputs/linuxcnc-doc-en_2.9.9-2_all.deb +++ /srv/rebuilderd/tmp/rebuilderdUnCtRg/out/linuxcnc-doc-en_2.9.9-2_all.deb ├── file list │ @@ -1,3 +1,3 @@ │ -rw-r--r-- 0 0 0 4 2026-06-28 22:04:26.000000 debian-binary │ -rw-r--r-- 0 0 0 1388 2026-06-28 22:04:26.000000 control.tar.xz │ --rw-r--r-- 0 0 0 27241688 2026-06-28 22:04:26.000000 data.tar.xz │ +-rw-r--r-- 0 0 0 27241984 2026-06-28 22:04:26.000000 data.tar.xz ├── control.tar.xz │ ├── control.tar │ │ ├── ./md5sums │ │ │ ├── ./md5sums │ │ │ │┄ Files differ ├── data.tar.xz │ ├── data.tar │ │ ├── file list │ │ │ @@ -11,15 +11,15 @@ │ │ │ drwxr-xr-x 0 root (0) root (0) 0 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/ │ │ │ -rw-r--r-- 0 root (0) root (0) 1081 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/AUTHORS │ │ │ -rw-r--r-- 0 root (0) root (0) 1884 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/INSTALL.adoc.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 858821 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Developer.pdf │ │ │ -rw-r--r-- 0 root (0) root (0) 26075727 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Documentation.pdf │ │ │ -rw-r--r-- 0 root (0) root (0) 497363 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Getting_Started.pdf │ │ │ -rw-r--r-- 0 root (0) root (0) 150148 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Integrator.pdf │ │ │ --rw-r--r-- 0 root (0) root (0) 1167062 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Manual_Pages.pdf │ │ │ +-rw-r--r-- 0 root (0) root (0) 1167060 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/LinuxCNC_Manual_Pages.pdf │ │ │ -rw-r--r-- 0 root (0) root (0) 3759 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/README.adoc.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1529 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/README.axis │ │ │ -rw-r--r-- 0 root (0) root (0) 506 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/axis_light_background │ │ │ -rw-r--r-- 0 root (0) root (0) 14664 2026-06-25 22:22:40.000000 ./usr/share/doc/linuxcnc/gcode.html │ │ │ -rw-r--r-- 0 root (0) root (0) 1868 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/rtfaults.adoc │ │ │ -rw-r--r-- 0 root (0) root (0) 5504 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc/tklinuxcnc.adoc.gz │ │ │ drwxr-xr-x 0 root (0) root (0) 0 2026-06-28 22:04:26.000000 ./usr/share/doc/linuxcnc-doc-en/ │ │ ├── ./usr/share/doc/linuxcnc/LinuxCNC_Documentation.pdf │ │ │┄ Command `'dumppdf -at {}'` failed with exit code 1. Standard output: │ │ │┄ Traceback (most recent call last): │ │ │┄ File "/usr/bin/dumppdf", line 473, in │ │ │┄ main() │ │ │┄ ~~~~^^ │ │ │┄ File "/usr/bin/dumppdf", line 457, in main │ │ │┄ dumppdf( │ │ │┄ ~~~~~~~^ │ │ │┄ outfp, │ │ │┄ [...] │ │ │ @@ -667050,19 +667050,19 @@ │ │ │ 00a2da90: 4d61 736b 5b30 2030 5d2f 5479 7065 2f58 Mask[0 0]/Type/X │ │ │ 00a2daa0: 4f62 6a65 6374 2f53 7562 7479 7065 2f49 Object/Subtype/I │ │ │ 00a2dab0: 6d61 6765 2f57 6964 7468 0a31 382f 4865 mage/Width.18/He │ │ │ 00a2dac0: 6967 6874 2031 392f 4269 7473 5065 7243 ight 19/BitsPerC │ │ │ 00a2dad0: 6f6d 706f 6e65 6e74 2031 2f46 696c 7465 omponent 1/Filte │ │ │ 00a2dae0: 722f 466c 6174 6544 6563 6f64 652f 4c65 r/FlateDecode/Le │ │ │ 00a2daf0: 6e67 7468 2036 343e 3e0a 7374 7265 616d ngth 64>>.stream │ │ │ -00a2db00: 0a78 da6b fc20 e7e7 33d5 c099 0188 3c5c .x.k. ..3.....<\ │ │ │ +00a2db00: 0a78 da6b fc60 e6e7 33d5 c099 0188 3c5c .x.k.`..3.....<\ │ │ │ 00a2db10: 195c 3c66 3505 0436 2624 351c a8f8 ffff .\1}....... │ │ │ -00a2db40: af0a 656e 6473 7472 6561 6d0a 656e 646f ..endstream.endo │ │ │ +00a2db30: 06ce ca06 ce7c 3e31 7dcd 0fec 0188 cb16 .....|>1}....... │ │ │ +00a2db40: c70a 656e 6473 7472 6561 6d0a 656e 646f ..endstream.endo │ │ │ 00a2db50: 626a 0a35 3031 3620 3020 6f62 6a0a 3c3c bj.5016 0 obj.<< │ │ │ 00a2db60: 2f46 696c 7465 722f 466c 6174 6544 6563 /Filter/FlateDec │ │ │ 00a2db70: 6f64 652f 4c65 6e67 7468 2032 3437 323e ode/Length 2472> │ │ │ 00a2db80: 3e0a 7374 7265 616d 0a78 daad 5acb 8e23 >.stream.x..Z..# │ │ │ 00a2db90: bb0d dde7 2bfc 03d6 d583 d403 307a 1124 ....+.......0z.$ │ │ │ 00a2dba0: b948 7637 e95d 9085 dbdd ce26 8360 b2c9 .Hv7.].....&.`.. │ │ │ 00a2dbb0: ef47 0f52 a2ea e1b2 6732 03c3 5d55 9248 .G.R....g2..]U.H │ │ ├── ./usr/share/doc/linuxcnc/LinuxCNC_Manual_Pages.pdf │ │ │ ├── pdftotext {} - │ │ │ │ @@ -6442,15 +6442,15 @@ │ │ │ │ Modbus slave address │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ 134 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ pmx485-test(1) │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ @@ -8142,15 +8142,15 @@ │ │ │ │ Computed resistance of the thermistor. │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 175 │ │ │ │ │ │ │ │ tool_mmap_read(1) │ │ │ │ │ │ │ │ The Enhanced Machine Controller │ │ │ │ │ │ │ │ @@ -8747,15 +8747,15 @@ │ │ │ │ Modbus slave address │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ 188 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ XHC-HB04-ACCELS(1) │ │ │ │ │ │ │ │ The Enhanced Machine Controller │ │ │ │ │ │ │ │ @@ -13068,15 +13068,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 283 │ │ │ │ │ │ │ │ ABS_S32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13107,15 +13107,15 @@ │ │ │ │ Sebastian Kuzminsky │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 284 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ AND2(9) │ │ │ │ │ │ │ │ @@ -13147,15 +13147,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 285 │ │ │ │ │ │ │ │ ANGLEJOG(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13198,15 +13198,15 @@ │ │ │ │ anglejog.N.scale-in float in │ │ │ │ magnitude units/count (mag = counts * scale) │ │ │ │ anglejog.N.max-vel float in │ │ │ │ vector max velocity magnitude │ │ │ │ │ │ │ │ 286 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ANGLEJOG(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13243,15 +13243,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 287 │ │ │ │ │ │ │ │ AT_PID(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13319,15 +13319,15 @@ │ │ │ │ Chris S. Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 289 │ │ │ │ │ │ │ │ BIN2GRAY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13355,15 +13355,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 290 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BIQUAD(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13416,15 +13416,15 @@ │ │ │ │ biquad.N.n1 float rw (default: 0.0) │ │ │ │ 1st-delayed numerator coef │ │ │ │ biquad.N.n2 float rw (default: 0.0) │ │ │ │ 2nd-delayed numerator coef │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 291 │ │ │ │ │ │ │ │ BIQUAD(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13434,15 +13434,15 @@ │ │ │ │ Peter G. Vavaroutsos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 292 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BITSLICE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13471,15 +13471,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL2+ │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 293 │ │ │ │ │ │ │ │ BITWISE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13516,15 +13516,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL 2+ │ │ │ │ │ │ │ │ 294 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13568,15 +13568,15 @@ │ │ │ │ H Emulated Hall sensor output. This mode can be used to control a drive which expects 3x Hall signals, or to │ │ │ │ convert between a motor with one hall pattern and a drive which expects a different one. │ │ │ │ F Emulated Fanuc Red Cap Gray-code encoder output. This mode might be used to drive a non-Fanuc motor │ │ │ │ using a Fanuc drive intended for the "Red-Cap" motors. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 295 │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13623,15 +13623,15 @@ │ │ │ │ bldc.N.C2 bit in [if ( personality & 0x10 )] │ │ │ │ Fanuc Gray-code bit 1 input │ │ │ │ bldc.N.C4 bit in [if ( personality & 0x10 )] │ │ │ │ Fanuc Gray-code bit 2 input │ │ │ │ │ │ │ │ 296 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ @@ -13680,15 +13680,15 @@ │ │ │ │ bldc.N.B-on bit out [if ( personality & 0xF00 ) == 0x100] │ │ │ │ Output bit for phase B │ │ │ │ bldc.N.C-on bit out [if ( personality & 0xF00 ) == 0x100] │ │ │ │ Output bit for phase C │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 297 │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -13737,15 +13737,15 @@ │ │ │ │ value has a range of 0 to 1 and measures electrical revolutions. It will have two zeros for a 4 pole │ │ │ │ motor, three for a 6-pole, etc. │ │ │ │ bldc.N.rotor-angle float out (default: 0) │ │ │ │ Rotor angle after encoder zeroing etc. Useful for angle/current drives which add their own phase offset such as the 8I20. This value has a range of 0 to 1 and measures electrical revolutions. It will have │ │ │ │ │ │ │ │ 298 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ @@ -13786,15 +13786,15 @@ │ │ │ │ commutation) and 26, its reverse. 17 (120 degree). 18 (alternate 60 degree). 21 (300 degree, Bodine). 22 (240 degree). 25 (60 degree commutation). │ │ │ │ Note that a number of incorrect commutations will have non-zero net torque which might look as if │ │ │ │ they work, but don’t really. │ │ │ │ If your motor lacks documentation it might be worth trying every pattern. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 299 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ @@ -14146,15 +14146,15 @@ │ │ │ │ 101 │ │ │ │ 100 │ │ │ │ 100 │ │ │ │ 101 │ │ │ │ 111 │ │ │ │ 110 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ BLDC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14164,15 +14164,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 301 │ │ │ │ │ │ │ │ BLEND(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14205,15 +14205,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 302 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CAROUSEL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14255,15 +14255,15 @@ │ │ │ │ time that the "enable" pin is set; the carousel will rotate forwards searching for a home signal. In ’index’ and │ │ │ │ ’edge’ mode this is when both the index and pulse inputs are true. In ’counts’ mode only the index input needs │ │ │ │ to be set to set home. Additionally in ’counts’ mode the usual index-enable logic of the encoder counters is │ │ │ │ supported. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 303 │ │ │ │ │ │ │ │ CAROUSEL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14310,15 +14310,15 @@ │ │ │ │ parity errors │ │ │ │ carousel.N.sense-M bit in (M=0..personality) │ │ │ │ Carousel position feedback pins. In ’index’ mode there will be only 2 pins. sense-0 is the index and │ │ │ │ sense-1 is the pocket sensor. │ │ │ │ │ │ │ │ 304 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CAROUSEL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14365,15 +14365,15 @@ │ │ │ │ carousel.N.homed bit out (default: 0) │ │ │ │ Shows that homing is complete. Only used in index and edge modes │ │ │ │ carousel.N.unhome bit in (default: 0) │ │ │ │ Should only really be necessary for testing │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 305 │ │ │ │ │ │ │ │ CAROUSEL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14403,15 +14403,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 306 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CHARGE_PUMP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14447,15 +14447,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 307 │ │ │ │ │ │ │ │ CLARKE2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14493,15 +14493,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 308 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CLARKE3(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14541,15 +14541,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 309 │ │ │ │ │ │ │ │ CLARKEINV (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14587,15 +14587,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 310 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CLASSICLADDER(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14709,15 +14709,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 313 │ │ │ │ │ │ │ │ CONSTANT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14742,15 +14742,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 314 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_BIT_FLOAT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14774,15 +14774,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 315 │ │ │ │ │ │ │ │ CONV_BIT_S32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14806,15 +14806,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 316 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_BIT_U32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14838,15 +14838,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 317 │ │ │ │ │ │ │ │ CONV_FLOAT_S32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14876,15 +14876,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 318 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_FLOAT_U32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14914,15 +14914,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 319 │ │ │ │ │ │ │ │ CONV_S32_BIT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14952,15 +14952,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 320 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_S32_FLOAT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -14984,15 +14984,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 321 │ │ │ │ │ │ │ │ CONV_S32_U32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15022,15 +15022,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 322 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_U32_BIT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15060,15 +15060,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 323 │ │ │ │ │ │ │ │ CONV_U32_FLOAT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15092,15 +15092,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 324 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ CONV_U32_S32(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15130,15 +15130,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 325 │ │ │ │ │ │ │ │ COREXY_BY_HAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15184,15 +15184,15 @@ │ │ │ │ corexy-by-hal.N.alpha-cmd float out │ │ │ │ typ: command to alpha motor │ │ │ │ corexy-by-hal.N.beta-cmd float out │ │ │ │ typ: command to beta ts motor │ │ │ │ │ │ │ │ 326 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ COREXY_BY_HAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15202,15 +15202,15 @@ │ │ │ │ Dewey Garrett based on forum post from nbremond │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 327 │ │ │ │ │ │ │ │ COUNTER(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15290,15 +15290,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 329 │ │ │ │ │ │ │ │ DDT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15330,15 +15330,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 330 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ DEADZONE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15368,15 +15368,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 331 │ │ │ │ │ │ │ │ DEBOUNCE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15456,15 +15456,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL 2+ │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 333 │ │ │ │ │ │ │ │ DIFFERENTIAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15501,15 +15501,15 @@ │ │ │ │ Sebastian Kuzminsky │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 334 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ DIV2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15547,15 +15547,15 @@ │ │ │ │ Noel Rodes │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 335 │ │ │ │ │ │ │ │ EDGE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15594,15 +15594,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 336 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ENCODER(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15943,15 +15943,15 @@ │ │ │ │ eoffset-per-angle.N.rfraction float in (default: 0.1) │ │ │ │ Offset amplitude (+/- fraction of radius_ref) │ │ │ │ eoffset-per-angle.N.fmult float in (default: 6) │ │ │ │ Offset frequency multiplier │ │ │ │ │ │ │ │ 344 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ EOFFSET_PER_ANGLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -15992,15 +15992,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 345 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ ESTOP_LATCH(9) │ │ │ │ │ │ │ │ @@ -16061,15 +16061,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 346 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ FEEDCOMP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16105,15 +16105,15 @@ │ │ │ │ Eric H. Johnson │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 347 │ │ │ │ │ │ │ │ FILTER_KALMAN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16162,30 +16162,30 @@ │ │ │ │ Estimation of the noise covariances (observation). │ │ │ │ │ │ │ │ AUTHOR │ │ │ │ Dmian Wrobel │ │ │ │ │ │ │ │ 348 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ FILTER_KALMAN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ FILTER_KALMAN (9) │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL-2.0-or-later │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 349 │ │ │ │ │ │ │ │ FLIPFLOP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16218,15 +16218,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 350 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ GANTRY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16274,15 +16274,15 @@ │ │ │ │ gantry.N.position-cmd float in │ │ │ │ Commanded position from motion │ │ │ │ gantry.N.position-fb float out │ │ │ │ Position feedback to motion │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 351 │ │ │ │ │ │ │ │ GANTRY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16299,15 +16299,15 @@ │ │ │ │ Charles Steinkuehler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 352 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ GANTRYKINS(9) │ │ │ │ │ │ │ │ Kinematics Module │ │ │ │ │ │ │ │ @@ -16373,15 +16373,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 354 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ GENTRIVKINS(9) │ │ │ │ │ │ │ │ Kernel Developer’s Manual │ │ │ │ │ │ │ │ @@ -16458,15 +16458,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 357 │ │ │ │ │ │ │ │ hal_bb_gpio(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16785,15 +16785,15 @@ │ │ │ │ histobins.N.input-bit bit in │ │ │ │ histobins.N.nbins u32 in (default: 20) │ │ │ │ histobins.N.binsize float in (default: 1) │ │ │ │ histobins.N.minvalue float in (default: 0) │ │ │ │ │ │ │ │ 364 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HISTOBINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -16818,15 +16818,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 365 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ HM2_7I43(9) │ │ │ │ │ │ │ │ @@ -17976,15 +17976,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 387 │ │ │ │ │ │ │ │ HOSTMOT2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19334,15 +19334,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 415 │ │ │ │ │ │ │ │ ILOWPASS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19383,15 +19383,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 416 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ INTEG(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19420,15 +19420,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 417 │ │ │ │ │ │ │ │ INVERT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19462,15 +19462,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 418 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ JOYHANDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19514,15 +19514,15 @@ │ │ │ │ Paul Willutzki │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 419 │ │ │ │ │ │ │ │ KINS(9) │ │ │ │ │ │ │ │ Kinematics Modules │ │ │ │ │ │ │ │ @@ -19849,15 +19849,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 426 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LATENCYBINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -19912,30 +19912,30 @@ │ │ │ │ latencybins.N.availablebins s32 out (default: 1000) │ │ │ │ │ │ │ │ AUTHOR │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 427 │ │ │ │ │ │ │ │ LATENCYBINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LATENCYBINS(9) │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 428 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LCD(9) │ │ │ │ │ │ │ │ @@ -20095,15 +20095,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 432 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LIMIT2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20131,15 +20131,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 433 │ │ │ │ │ │ │ │ LIMIT3(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20177,15 +20177,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 434 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LIMIT_AXIS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20235,15 +20235,15 @@ │ │ │ │ limit-axis.N.min-limit-MM float in (MM=00..personality) │ │ │ │ The array of minimum limits to select from │ │ │ │ limit-axis.N.max-limit-MM float in (MM=00..personality) │ │ │ │ The array of macimum limits │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 435 │ │ │ │ │ │ │ │ LIMIT_AXIS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20266,15 +20266,15 @@ │ │ │ │ Chad Woitas │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 436 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LINCURVE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20319,15 +20319,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 437 │ │ │ │ │ │ │ │ LINEARDELTAKINS(9) │ │ │ │ │ │ │ │ Kinematics Component │ │ │ │ │ │ │ │ @@ -20431,15 +20431,15 @@ │ │ │ │ net sig-in-0 => logic.0.in-00 │ │ │ │ net sig-in-1 => logic.0.in-01 │ │ │ │ net sig-out <= logic.0.or │ │ │ │ This is a named AND circuit with two inputs and one output. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 439 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LOGIC(9) │ │ │ │ │ │ │ │ @@ -20458,15 +20458,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 440 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ LOWPASS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20515,15 +20515,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 441 │ │ │ │ │ │ │ │ LUT5(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20550,15 +20550,15 @@ │ │ │ │ 0xfffffffe. Because every weight except 0x1 is true the function is the sum of every line except the first one. │ │ │ │ A 2-input xor function is TRUE whenever exactly one of the inputs is true, so the correct value for function is │ │ │ │ 0x6. Only in-0 and in-1 should be connected to signals, because if any other bit is TRUE then the output will │ │ │ │ be FALSE. │ │ │ │ │ │ │ │ 442 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ LUT5(9) │ │ │ │ │ │ │ │ @@ -20780,15 +20780,15 @@ │ │ │ │ lut5.N.function u32 rw │ │ │ │ │ │ │ │ SEE ALSO │ │ │ │ and(9), logic(9), not(9), or2(9), xor2(9). │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 443 │ │ │ │ │ │ │ │ LUT5(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20798,15 +20798,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 444 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MAJ3(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20834,15 +20834,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 445 │ │ │ │ │ │ │ │ MATCH8(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -20883,15 +20883,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 446 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MATRIX_KB(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21014,15 +21014,15 @@ │ │ │ │ max31855.N.temp-kelvin.M float out (M=0..( personality & 0xf )) │ │ │ │ Temperature in Kelvin. │ │ │ │ max31855.N.fault.M bit out (M=0..( personality & 0xf )) │ │ │ │ Fault condition detected. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 449 │ │ │ │ │ │ │ │ MAX31855(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21035,15 +21035,15 @@ │ │ │ │ Joseph Calderon │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 450 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MESA_7I65(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21085,15 +21085,15 @@ │ │ │ │ Andy Pugh / Cliff Blackburn │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 451 │ │ │ │ │ │ │ │ MESA_PKTGYRO_TEST (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21136,15 +21136,15 @@ │ │ │ │ Boris Skegin │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 452 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MESA_UART (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21190,25 +21190,25 @@ │ │ │ │ Andy Pugh andy@bodgesoc.org │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 453 │ │ │ │ │ │ │ │ MESA_UART (9) │ │ │ │ │ │ │ │ 454 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ MESA_UART (9) │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MESSAGE(9) │ │ │ │ │ │ │ │ @@ -21257,15 +21257,15 @@ │ │ │ │ Les Newell │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL v2 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 455 │ │ │ │ │ │ │ │ MILLTURN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21300,15 +21300,15 @@ │ │ │ │ David Mueller │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 456 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MINMAX(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21334,15 +21334,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 457 │ │ │ │ │ │ │ │ MOTION (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21899,15 +21899,15 @@ │ │ │ │ This HAL-only means of offsetting is typically not known to LinuxCNC nor available in GUI preview displays. No protection is provided for offset moves that exceed soft limits managed by LinuxCNC. Since soft │ │ │ │ limits are not honored, an offset move may encounter hard limits (or CRASH if there are no limit switches). │ │ │ │ Use of the offset-min-M and offset-max-M inputs to limit travel is recommended. Triggering a hard limit will │ │ │ │ turn off the machine -- see Caution above. │ │ │ │ │ │ │ │ 470 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MOVEOFF(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -21952,15 +21952,15 @@ │ │ │ │ moveoff.N.offset-applied bit out │ │ │ │ TRUE if one or more offsets are applied. │ │ │ │ moveoff.N.waypoint-limit bit out (default: 0) │ │ │ │ Indicates waypoint limit reached (motion ceases), an enabling pin must be deasserted to initiate return to original position. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 471 │ │ │ │ │ │ │ │ MOVEOFF(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22007,15 +22007,15 @@ │ │ │ │ Dewey Garrett and Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 472 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MULT2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22043,15 +22043,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 473 │ │ │ │ │ │ │ │ MULTICLICK (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22101,15 +22101,15 @@ │ │ │ │ │ │ │ │ PARAMETERS │ │ │ │ multiclick.N.invert-input bit rw (default: FALSE) │ │ │ │ If FALSE (the default), clicks start with rising edges. If TRUE, clicks start with falling edges. │ │ │ │ │ │ │ │ 474 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MULTICLICK (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22128,15 +22128,15 @@ │ │ │ │ Sebastian Kuzminsky │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 475 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MULTISWITCH(9) │ │ │ │ │ │ │ │ @@ -22173,15 +22173,15 @@ │ │ │ │ ArcEye schooner30@tiscali.co.uk / Andy Pugh andy@bodgesoc.org │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 476 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MUX16(9) │ │ │ │ │ │ │ │ @@ -22232,30 +22232,30 @@ │ │ │ │ mux2(9), mux4(9), mux8(9), mux_generic(9). │ │ │ │ │ │ │ │ AUTHOR │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 477 │ │ │ │ │ │ │ │ MUX16(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MUX16(9) │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 478 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ MUX2(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22284,15 +22284,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 479 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MUX4(9) │ │ │ │ │ │ │ │ @@ -22333,15 +22333,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 480 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ MUX8(9) │ │ │ │ │ │ │ │ @@ -22395,15 +22395,15 @@ │ │ │ │ Stuart Stevenson │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 481 │ │ │ │ │ │ │ │ MUX_GENERIC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22516,15 +22516,15 @@ │ │ │ │ Chris Radek │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 484 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ NOT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22550,15 +22550,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 485 │ │ │ │ │ │ │ │ OFFSET (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22592,15 +22592,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 486 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ OHMIC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22651,15 +22651,15 @@ │ │ │ │ ohmic.N.ohmic-on bit out │ │ │ │ True if ohmic circuit is closed (material is sensed) │ │ │ │ ohmic.N.ohmic-volts float out │ │ │ │ Calculated ohmic voltage │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 487 │ │ │ │ │ │ │ │ OHMIC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22691,15 +22691,15 @@ │ │ │ │ Rod Webster │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 488 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ONESHOT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22747,15 +22747,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 489 │ │ │ │ │ │ │ │ OPTO_AC5(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22857,15 +22857,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 492 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ORIENT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22911,15 +22911,15 @@ │ │ │ │ orient.N.position float in │ │ │ │ spindle position input, unit 1 rev │ │ │ │ orient.N.angle float in │ │ │ │ orient target position in degrees, 0 <= angle < 360 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 493 │ │ │ │ │ │ │ │ ORIENT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -22938,15 +22938,15 @@ │ │ │ │ Michael Haberler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 494 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PID(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23303,15 +23303,15 @@ │ │ │ │ plasmac.arc-voltage-offset float in │ │ │ │ offset to set arc voltage to 0 at 0 volts │ │ │ │ plasmac.arc-voltage-scale float in │ │ │ │ scale to convert arc_voltage input to actual volts │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 501 │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23360,15 +23360,15 @@ │ │ │ │ plasmac.debug-print bit in │ │ │ │ if true will print state changes as a debug aid │ │ │ │ plasmac.external-estop bit in │ │ │ │ external E-stop input │ │ │ │ │ │ │ │ 502 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23417,15 +23417,15 @@ │ │ │ │ plasmac.mesh-arc-ok bit in (default: FALSE) │ │ │ │ don’t require arc ok for mesh mode │ │ │ │ plasmac.mesh-enable bit in │ │ │ │ enable mesh cutting mode │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 503 │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23474,15 +23474,15 @@ │ │ │ │ plasmac.paused-motion-speed float in │ │ │ │ multiplier for speed of motion when paused, from -1 to 1 │ │ │ │ plasmac.pid-d-gain float in │ │ │ │ derivative gain input [mode 0 & mode 1] │ │ │ │ │ │ │ │ 504 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23531,15 +23531,15 @@ │ │ │ │ plasmac.scribe-start bit in │ │ │ │ start a new scribe, connect to spindle.1.on │ │ │ │ plasmac.setup-feed-rate float in │ │ │ │ feed rate for moves to pierce and cut heights (machine units per minute) │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 505 │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23588,15 +23588,15 @@ │ │ │ │ plasmac.voidlock-slope s32 in (default: 500) │ │ │ │ voidlock slope in volts per second │ │ │ │ plasmac.x-offset s32 in │ │ │ │ offset to apply to axis x for consumable change and cut recovery (scaled units) │ │ │ │ │ │ │ │ 506 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23645,15 +23645,15 @@ │ │ │ │ plasmac.offset-scale float out │ │ │ │ offset scale, connect to axis..eoffset-scale │ │ │ │ plasmac.ohmic-enable bit out │ │ │ │ on only while probing │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 507 │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23702,15 +23702,15 @@ │ │ │ │ plasmac.torch-on bit out │ │ │ │ turn torch on, connect to your torch on input │ │ │ │ plasmac.torch-time float out │ │ │ │ torch on time of current job │ │ │ │ │ │ │ │ 508 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ PLASMAC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23747,15 +23747,15 @@ │ │ │ │ Phillip A Carter & Gregory D Carl │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 509 │ │ │ │ │ │ │ │ PWMGEN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -23885,15 +23885,15 @@ │ │ │ │ Andy Pugh │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL 2+ │ │ │ │ │ │ │ │ 512 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ ROSEKINS(9) │ │ │ │ │ │ │ │ Kernel Developer’s Manual │ │ │ │ │ │ │ │ @@ -23958,15 +23958,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 514 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL User’s Manual │ │ │ │ │ │ │ │ SAMPLER(9) │ │ │ │ │ │ │ │ @@ -24081,15 +24081,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 517 │ │ │ │ │ │ │ │ SCALED_S32_SUMS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24124,15 +24124,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 518 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SELECT8(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24163,15 +24163,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 519 │ │ │ │ │ │ │ │ SERPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24221,15 +24221,15 @@ │ │ │ │ PARAMETERS │ │ │ │ serport.N.pin-3-out-invert bit rw │ │ │ │ serport.N.pin-4-out-invert bit rw │ │ │ │ serport.N.pin-7-out-invert bit rw │ │ │ │ │ │ │ │ 520 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SERPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24238,15 +24238,15 @@ │ │ │ │ serport.N.ioaddr u32 r │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 521 │ │ │ │ │ │ │ │ SETSERIAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24479,15 +24479,15 @@ │ │ │ │ sim-axis-hardware.N.Y2maxsw-lower float in │ │ │ │ sim-axis-hardware.N.Zmaxsw-lower float in │ │ │ │ sim-axis-hardware.N.Amaxsw-lower float in │ │ │ │ sim-axis-hardware.N.Umaxsw-lower float in │ │ │ │ │ │ │ │ 526 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_AXIS_HARDWARE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24541,15 +24541,15 @@ │ │ │ │ sim-axis-hardware.N.Vhomesw-out bit out │ │ │ │ sim-axis-hardware.N.homesw-all bit out │ │ │ │ sim-axis-hardware.N.Xmaxsw-out bit out │ │ │ │ Max limit switch │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 527 │ │ │ │ │ │ │ │ SIM_AXIS_HARDWARE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24604,15 +24604,15 @@ │ │ │ │ sim-axis-hardware.N.Umaxsw-homesw-out bit out │ │ │ │ sim-axis-hardware.N.Uminsw-homesw-out bit out │ │ │ │ sim-axis-hardware.N.Ubothsw-homesw-out bit out │ │ │ │ sim-axis-hardware.N.Vmaxsw-homesw-out bit out │ │ │ │ │ │ │ │ 528 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_AXIS_HARDWARE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24627,15 +24627,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 529 │ │ │ │ │ │ │ │ SIM_ENCODER(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24744,15 +24744,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 532 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_MATRIX_KB(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24791,15 +24791,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 533 │ │ │ │ │ │ │ │ SIM_PARPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24850,15 +24850,15 @@ │ │ │ │ sim-parport.N.pin-04-out-fake bit out │ │ │ │ sim-parport.N.pin-05-out-fake bit out │ │ │ │ sim-parport.N.pin-06-out-fake bit out │ │ │ │ sim-parport.N.pin-07-out-fake bit out │ │ │ │ │ │ │ │ 534 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_PARPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24915,15 +24915,15 @@ │ │ │ │ sim-parport.N.pin-02-out-invert bit rw │ │ │ │ sim-parport.N.pin-03-out-invert bit rw │ │ │ │ sim-parport.N.pin-04-out-invert bit rw │ │ │ │ sim-parport.N.pin-05-out-invert bit rw │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 535 │ │ │ │ │ │ │ │ SIM_PARPORT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24953,15 +24953,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 536 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SIM_SPINDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -24994,15 +24994,15 @@ │ │ │ │ Michael Haberler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 537 │ │ │ │ │ │ │ │ SIMPLE_TP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25037,15 +25037,15 @@ │ │ │ │ Chris S Morley │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 538 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SPHEREPROBE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25078,15 +25078,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 539 │ │ │ │ │ │ │ │ SPINDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25136,15 +25136,15 @@ │ │ │ │ spindle.N.current-gear u32 out │ │ │ │ Currently selected gear. │ │ │ │ spindle.N.at-speed bit out │ │ │ │ TRUE when the spindle is at speed │ │ │ │ │ │ │ │ 540 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SPINDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25188,15 +25188,15 @@ │ │ │ │ spindle.N.speed-tolerance.x float in │ │ │ │ Tolerance for ’at-speed’ signal (in RPM). Actual spindle speeds within this amount of the commanded speed will cause the at-speed signal to go TRUE. │ │ │ │ spindle.N.zero-tolerance.x float in │ │ │ │ Tolerance for ’zero-speed’ signal (in RPM). │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 541 │ │ │ │ │ │ │ │ SPINDLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25212,15 +25212,15 @@ │ │ │ │ Les Newell │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 542 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SPINDLE_MONITOR(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25251,15 +25251,15 @@ │ │ │ │ Sebastian Kuzminsky │ │ │ │ │ │ │ │ LICENSE │ │ │ │ gpl v2 or higher │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 543 │ │ │ │ │ │ │ │ SSERIAL(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -25938,15 +25938,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 557 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ STREAMER(9) │ │ │ │ │ │ │ │ @@ -26074,15 +26074,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 560 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ SUPPLY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26173,15 +26173,15 @@ │ │ │ │ thc.current-vel float in │ │ │ │ Connect to motion.current-vel │ │ │ │ thc.requested-vel float in │ │ │ │ Connect to motion.requested-vel │ │ │ │ │ │ │ │ 562 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ THC(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26226,15 +26226,15 @@ │ │ │ │ John Thornton │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 563 │ │ │ │ │ │ │ │ THCUD(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26278,15 +26278,15 @@ │ │ │ │ net thc-enable thcud.enable <= pyvcp.thc-enable │ │ │ │ │ │ │ │ FUNCTIONS │ │ │ │ thcud (requires a floating-point thread) │ │ │ │ │ │ │ │ 564 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ THCUD(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26330,15 +26330,15 @@ │ │ │ │ John Thornton │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPLv2 or greater │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 565 │ │ │ │ │ │ │ │ THREADS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26406,15 +26406,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 567 │ │ │ │ │ │ │ │ TIME(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26465,15 +26465,15 @@ │ │ │ │ │ │ │ │ In your post-gui.hal file you might use one of the following to connect this timer: │ │ │ │ For a new config: │ │ │ │ loadrt time │ │ │ │ │ │ │ │ 568 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TIME(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26522,15 +26522,15 @@ │ │ │ │ John Thornton, itaib, Moses McKnight │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 569 │ │ │ │ │ │ │ │ TIMEDELAY (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26560,15 +26560,15 @@ │ │ │ │ Jeff Epler, based on works by Stephen Wille Padnos and John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 570 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TIMEDELTA(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26610,15 +26610,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 571 │ │ │ │ │ │ │ │ TOF(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26650,15 +26650,15 @@ │ │ │ │ Chad Woitas │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 572 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TOGGLE(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26691,15 +26691,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 573 │ │ │ │ │ │ │ │ TOGGLE2NIST (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26742,15 +26742,15 @@ │ │ │ │ Anders Wallin │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 574 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TON (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26782,15 +26782,15 @@ │ │ │ │ Chad Woitas │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 575 │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ TP(9) │ │ │ │ │ │ │ │ @@ -26822,15 +26822,15 @@ │ │ │ │ Chad Woitas │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 576 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TPCOMP(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26865,15 +26865,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 577 │ │ │ │ │ │ │ │ TRISTATE_BIT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26901,15 +26901,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 578 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ TRISTATE_FLOAT (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26937,15 +26937,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 579 │ │ │ │ │ │ │ │ UPDOWN (9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -26986,15 +26986,15 @@ │ │ │ │ Stephen Wille Padnos │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 580 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ USERKINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27045,15 +27045,15 @@ │ │ │ │ NOTES: │ │ │ │ 1 The fpin pin is included to satisfy the requirements of │ │ │ │ the halcompile utility but it is not accessible to kinematics │ │ │ │ functions. │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 581 │ │ │ │ │ │ │ │ USERKINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27075,15 +27075,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 582 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ WATCHDOG(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27166,15 +27166,15 @@ │ │ │ │ Jeff Epler │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 584 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ WEIGHTED_SUM(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27272,15 +27272,15 @@ │ │ │ │ Dewey Garrett │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 586 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ XOR2(9) │ │ │ │ │ │ │ │ @@ -27313,15 +27313,15 @@ │ │ │ │ John Kasunich │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ LinuxCNC Documentation │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ 587 │ │ │ │ │ │ │ │ XYZAB_TDR_KINS(9) │ │ │ │ │ │ │ │ HAL Component │ │ │ │ │ │ │ │ @@ -27354,12 +27354,12 @@ │ │ │ │ David Mueller │ │ │ │ │ │ │ │ LICENSE │ │ │ │ GPL │ │ │ │ │ │ │ │ 588 │ │ │ │ │ │ │ │ -2026-06-28 │ │ │ │ +2026-06-29 │ │ │ │ │ │ │ │ LinuxCNC Documentation