--- /srv/rebuilderd/tmp/rebuilderd0IfAFd/inputs/linuxcnc-uspace_2.9.4-2_arm64.deb +++ /srv/rebuilderd/tmp/rebuilderd0IfAFd/out/linuxcnc-uspace_2.9.4-2_arm64.deb ├── file list │ @@ -1,3 +1,3 @@ │ -rw-r--r-- 0 0 0 4 2025-04-13 22:10:01.000000 debian-binary │ --rw-r--r-- 0 0 0 112116 2025-04-13 22:10:01.000000 control.tar.xz │ --rw-r--r-- 0 0 0 25474620 2025-04-13 22:10:01.000000 data.tar.xz │ +-rw-r--r-- 0 0 0 112124 2025-04-13 22:10:01.000000 control.tar.xz │ +-rw-r--r-- 0 0 0 25475892 2025-04-13 22:10:01.000000 data.tar.xz ├── control.tar.xz │ ├── control.tar │ │ ├── ./md5sums │ │ │ ├── ./md5sums │ │ │ │┄ Files differ ├── data.tar.xz │ ├── data.tar │ │ ├── file list │ │ │ @@ -4526,85 +4526,85 @@ │ │ │ -rw-r--r-- 0 root (0) root (0) 1492 2025-04-13 22:10:01.000000 ./usr/share/man/man1/shuttle.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 560 2025-04-13 22:10:01.000000 ./usr/share/man/man1/sim-torch.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1494 2025-04-13 22:10:01.000000 ./usr/share/man/man1/sim_pin.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1032 2025-04-13 22:10:01.000000 ./usr/share/man/man1/simulate_probe.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1044 2025-04-13 22:10:01.000000 ./usr/share/man/man1/stepconf.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 2120 2025-04-13 22:10:01.000000 ./usr/share/man/man1/svd-ps_vfd.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1133 2025-04-13 22:10:01.000000 ./usr/share/man/man1/teach-in.1.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 744 2025-04-13 22:10:01.000000 ./usr/share/man/man1/thermistor.1.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 743 2025-04-13 22:10:01.000000 ./usr/share/man/man1/thermistor.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1058 2025-04-13 22:10:01.000000 ./usr/share/man/man1/tool_mmap_read.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1054 2025-04-13 22:10:01.000000 ./usr/share/man/man1/tool_watch.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1006 2025-04-13 22:10:01.000000 ./usr/share/man/man1/tooledit.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1226 2025-04-13 22:10:01.000000 ./usr/share/man/man1/touchy.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1125 2025-04-13 22:10:01.000000 ./usr/share/man/man1/update_ini.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 3450 2025-04-13 22:10:01.000000 ./usr/share/man/man1/vfdb_vfd.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 3123 2025-04-13 22:10:01.000000 ./usr/share/man/man1/vfs11_vfd.1.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 661 2025-04-13 22:10:01.000000 ./usr/share/man/man1/wj200_vfd.1.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 662 2025-04-13 22:10:01.000000 ./usr/share/man/man1/wj200_vfd.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1014 2025-04-13 22:10:01.000000 ./usr/share/man/man1/xhc-hb04-accels.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 3950 2025-04-13 22:10:01.000000 ./usr/share/man/man1/xhc-hb04.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 8220 2025-04-13 22:10:01.000000 ./usr/share/man/man1/xhc-whb04b-6.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1049 2025-04-13 22:10:01.000000 ./usr/share/man/man1/xyzab-tdr-gui.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1069 2025-04-13 22:10:01.000000 ./usr/share/man/man1/xyzac-trt-gui.1.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1069 2025-04-13 22:10:01.000000 ./usr/share/man/man1/xyzbc-trt-gui.1.gz │ │ │ drwxr-xr-x 0 root (0) root (0) 0 2025-04-13 22:10:01.000000 ./usr/share/man/man9/ │ │ │ -rw-r--r-- 0 root (0) root (0) 504 2025-04-13 22:10:01.000000 ./usr/share/man/man9/abs.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 495 2025-04-13 22:10:01.000000 ./usr/share/man/man9/abs_s32.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 506 2025-04-13 22:10:01.000000 ./usr/share/man/man9/and2.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 1396 2025-04-13 22:10:01.000000 ./usr/share/man/man9/anglejog.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 1397 2025-04-13 22:10:01.000000 ./usr/share/man/man9/anglejog.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 195 2025-04-13 22:10:01.000000 ./usr/share/man/man9/at_pid.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 790 2025-04-13 22:10:01.000000 ./usr/share/man/man9/axistest.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 421 2025-04-13 22:10:01.000000 ./usr/share/man/man9/bin2gray.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 422 2025-04-13 22:10:01.000000 ./usr/share/man/man9/bin2gray.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 988 2025-04-13 22:10:01.000000 ./usr/share/man/man9/biquad.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 550 2025-04-13 22:10:01.000000 ./usr/share/man/man9/bitslice.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 472 2025-04-13 22:10:01.000000 ./usr/share/man/man9/bitwise.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 549 2025-04-13 22:10:01.000000 ./usr/share/man/man9/bitslice.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 471 2025-04-13 22:10:01.000000 ./usr/share/man/man9/bitwise.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 5540 2025-04-13 22:10:01.000000 ./usr/share/man/man9/bldc.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 584 2025-04-13 22:10:01.000000 ./usr/share/man/man9/blend.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 3622 2025-04-13 22:10:01.000000 ./usr/share/man/man9/carousel.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 754 2025-04-13 22:10:01.000000 ./usr/share/man/man9/charge_pump.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 755 2025-04-13 22:10:01.000000 ./usr/share/man/man9/charge_pump.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 796 2025-04-13 22:10:01.000000 ./usr/share/man/man9/clarke2.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 700 2025-04-13 22:10:01.000000 ./usr/share/man/man9/clarke3.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 701 2025-04-13 22:10:01.000000 ./usr/share/man/man9/clarke3.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 641 2025-04-13 22:10:01.000000 ./usr/share/man/man9/clarkeinv.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1209 2025-04-13 22:10:01.000000 ./usr/share/man/man9/classicladder.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 723 2025-04-13 22:10:01.000000 ./usr/share/man/man9/comp.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 418 2025-04-13 22:10:01.000000 ./usr/share/man/man9/constant.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 417 2025-04-13 22:10:01.000000 ./usr/share/man/man9/constant.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 443 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_bit_float.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 411 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_bit_s32.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 412 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_bit_u32.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 411 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_bit_u32.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 538 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_float_s32.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 538 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_float_u32.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 508 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_s32_bit.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 443 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_s32_float.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 442 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_s32_float.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 512 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_s32_u32.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 508 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_u32_bit.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 443 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_u32_float.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 509 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_u32_bit.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 442 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_u32_float.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 512 2025-04-13 22:10:01.000000 ./usr/share/man/man9/conv_u32_s32.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1042 2025-04-13 22:10:01.000000 ./usr/share/man/man9/corexy_by_hal.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1025 2025-04-13 22:10:01.000000 ./usr/share/man/man9/counter.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 463 2025-04-13 22:10:01.000000 ./usr/share/man/man9/dbounce.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 464 2025-04-13 22:10:01.000000 ./usr/share/man/man9/dbounce.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 614 2025-04-13 22:10:01.000000 ./usr/share/man/man9/ddt.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 515 2025-04-13 22:10:01.000000 ./usr/share/man/man9/deadzone.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 821 2025-04-13 22:10:01.000000 ./usr/share/man/man9/debounce.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 826 2025-04-13 22:10:01.000000 ./usr/share/man/man9/demux.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 825 2025-04-13 22:10:01.000000 ./usr/share/man/man9/demux.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 535 2025-04-13 22:10:01.000000 ./usr/share/man/man9/differential.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 618 2025-04-13 22:10:01.000000 ./usr/share/man/man9/div2.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 634 2025-04-13 22:10:01.000000 ./usr/share/man/man9/edge.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 633 2025-04-13 22:10:01.000000 ./usr/share/man/man9/edge.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 2502 2025-04-13 22:10:01.000000 ./usr/share/man/man9/encoder.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1213 2025-04-13 22:10:01.000000 ./usr/share/man/man9/encoder_ratio.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1806 2025-04-13 22:10:01.000000 ./usr/share/man/man9/enum.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 1779 2025-04-13 22:10:01.000000 ./usr/share/man/man9/eoffset_per_angle.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 1780 2025-04-13 22:10:01.000000 ./usr/share/man/man9/eoffset_per_angle.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 973 2025-04-13 22:10:01.000000 ./usr/share/man/man9/estop_latch.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 538 2025-04-13 22:10:01.000000 ./usr/share/man/man9/feedcomp.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 1289 2025-04-13 22:10:01.000000 ./usr/share/man/man9/filter_kalman.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 466 2025-04-13 22:10:01.000000 ./usr/share/man/man9/flipflop.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 1190 2025-04-13 22:10:01.000000 ./usr/share/man/man9/gantry.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 537 2025-04-13 22:10:01.000000 ./usr/share/man/man9/feedcomp.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 1290 2025-04-13 22:10:01.000000 ./usr/share/man/man9/filter_kalman.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 465 2025-04-13 22:10:01.000000 ./usr/share/man/man9/flipflop.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 1189 2025-04-13 22:10:01.000000 ./usr/share/man/man9/gantry.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 281 2025-04-13 22:10:01.000000 ./usr/share/man/man9/gantrykins.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 809 2025-04-13 22:10:01.000000 ./usr/share/man/man9/gearchange.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 169 2025-04-13 22:10:01.000000 ./usr/share/man/man9/gentrivkins.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 695 2025-04-13 22:10:01.000000 ./usr/share/man/man9/gladevcp.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 432 2025-04-13 22:10:01.000000 ./usr/share/man/man9/gray2bin.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 431 2025-04-13 22:10:01.000000 ./usr/share/man/man9/gray2bin.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 845 2025-04-13 22:10:01.000000 ./usr/share/man/man9/hal_bb_gpio.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 4046 2025-04-13 22:10:01.000000 ./usr/share/man/man9/hal_parport.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1015 2025-04-13 22:10:01.000000 ./usr/share/man/man9/histobins.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1619 2025-04-13 22:10:01.000000 ./usr/share/man/man9/hm2_7i43.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1370 2025-04-13 22:10:01.000000 ./usr/share/man/man9/hm2_7i90.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 3875 2025-04-13 22:10:01.000000 ./usr/share/man/man9/hm2_eth.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 600 2025-04-13 22:10:01.000000 ./usr/share/man/man9/hm2_pci.9.gz │ │ │ @@ -4613,65 +4613,65 @@ │ │ │ -rw-r--r-- 0 root (0) root (0) 4607 2025-04-13 22:10:01.000000 ./usr/share/man/man9/hm2_spix.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1184 2025-04-13 22:10:01.000000 ./usr/share/man/man9/homecomp.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 21339 2025-04-13 22:10:01.000000 ./usr/share/man/man9/hostmot2.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 448 2025-04-13 22:10:01.000000 ./usr/share/man/man9/hypot.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1015 2025-04-13 22:10:01.000000 ./usr/share/man/man9/ilowpass.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 515 2025-04-13 22:10:01.000000 ./usr/share/man/man9/integ.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 586 2025-04-13 22:10:01.000000 ./usr/share/man/man9/invert.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 973 2025-04-13 22:10:01.000000 ./usr/share/man/man9/joyhandle.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 974 2025-04-13 22:10:01.000000 ./usr/share/man/man9/joyhandle.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 4375 2025-04-13 22:10:01.000000 ./usr/share/man/man9/kins.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 598 2025-04-13 22:10:01.000000 ./usr/share/man/man9/knob2float.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 858 2025-04-13 22:10:01.000000 ./usr/share/man/man9/latencybins.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 3198 2025-04-13 22:10:01.000000 ./usr/share/man/man9/lcd.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 447 2025-04-13 22:10:01.000000 ./usr/share/man/man9/limit1.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 446 2025-04-13 22:10:01.000000 ./usr/share/man/man9/limit1.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 570 2025-04-13 22:10:01.000000 ./usr/share/man/man9/limit2.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 802 2025-04-13 22:10:01.000000 ./usr/share/man/man9/limit3.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 803 2025-04-13 22:10:01.000000 ./usr/share/man/man9/limit3.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1271 2025-04-13 22:10:01.000000 ./usr/share/man/man9/limit_axis.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 1025 2025-04-13 22:10:01.000000 ./usr/share/man/man9/lincurve.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 1026 2025-04-13 22:10:01.000000 ./usr/share/man/man9/lincurve.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 808 2025-04-13 22:10:01.000000 ./usr/share/man/man9/lineardeltakins.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1212 2025-04-13 22:10:01.000000 ./usr/share/man/man9/logic.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 884 2025-04-13 22:10:01.000000 ./usr/share/man/man9/lowpass.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 1720 2025-04-13 22:10:01.000000 ./usr/share/man/man9/lut5.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 1719 2025-04-13 22:10:01.000000 ./usr/share/man/man9/lut5.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 398 2025-04-13 22:10:01.000000 ./usr/share/man/man9/maj3.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 530 2025-04-13 22:10:01.000000 ./usr/share/man/man9/match8.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1760 2025-04-13 22:10:01.000000 ./usr/share/man/man9/matrix_kb.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1102 2025-04-13 22:10:01.000000 ./usr/share/man/man9/max31855.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 945 2025-04-13 22:10:01.000000 ./usr/share/man/man9/mesa_7i65.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1056 2025-04-13 22:10:01.000000 ./usr/share/man/man9/mesa_pktgyro_test.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1226 2025-04-13 22:10:01.000000 ./usr/share/man/man9/mesa_uart.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 910 2025-04-13 22:10:01.000000 ./usr/share/man/man9/message.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 880 2025-04-13 22:10:01.000000 ./usr/share/man/man9/millturn.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 468 2025-04-13 22:10:01.000000 ./usr/share/man/man9/minmax.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 911 2025-04-13 22:10:01.000000 ./usr/share/man/man9/message.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 881 2025-04-13 22:10:01.000000 ./usr/share/man/man9/millturn.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 467 2025-04-13 22:10:01.000000 ./usr/share/man/man9/minmax.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 6774 2025-04-13 22:10:01.000000 ./usr/share/man/man9/motion.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 3122 2025-04-13 22:10:01.000000 ./usr/share/man/man9/moveoff.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 439 2025-04-13 22:10:01.000000 ./usr/share/man/man9/mult2.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 1177 2025-04-13 22:10:01.000000 ./usr/share/man/man9/multiclick.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 1176 2025-04-13 22:10:01.000000 ./usr/share/man/man9/multiclick.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 703 2025-04-13 22:10:01.000000 ./usr/share/man/man9/multiswitch.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1080 2025-04-13 22:10:01.000000 ./usr/share/man/man9/mux16.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 488 2025-04-13 22:10:01.000000 ./usr/share/man/man9/mux2.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 604 2025-04-13 22:10:01.000000 ./usr/share/man/man9/mux4.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 654 2025-04-13 22:10:01.000000 ./usr/share/man/man9/mux8.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 655 2025-04-13 22:10:01.000000 ./usr/share/man/man9/mux8.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1781 2025-04-13 22:10:01.000000 ./usr/share/man/man9/mux_generic.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 599 2025-04-13 22:10:01.000000 ./usr/share/man/man9/near.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 394 2025-04-13 22:10:01.000000 ./usr/share/man/man9/not.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 598 2025-04-13 22:10:01.000000 ./usr/share/man/man9/near.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 393 2025-04-13 22:10:01.000000 ./usr/share/man/man9/not.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 512 2025-04-13 22:10:01.000000 ./usr/share/man/man9/offset.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1535 2025-04-13 22:10:01.000000 ./usr/share/man/man9/ohmic.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 787 2025-04-13 22:10:01.000000 ./usr/share/man/man9/oneshot.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 786 2025-04-13 22:10:01.000000 ./usr/share/man/man9/oneshot.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1142 2025-04-13 22:10:01.000000 ./usr/share/man/man9/opto_ac5.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 478 2025-04-13 22:10:01.000000 ./usr/share/man/man9/or2.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1262 2025-04-13 22:10:01.000000 ./usr/share/man/man9/orient.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 5662 2025-04-13 22:10:01.000000 ./usr/share/man/man9/pid.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 4359 2025-04-13 22:10:01.000000 ./usr/share/man/man9/plasmac.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 4360 2025-04-13 22:10:01.000000 ./usr/share/man/man9/plasmac.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1969 2025-04-13 22:10:01.000000 ./usr/share/man/man9/pwmgen.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 673 2025-04-13 22:10:01.000000 ./usr/share/man/man9/rosekins.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 417 2025-04-13 22:10:01.000000 ./usr/share/man/man9/sample_hold.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1980 2025-04-13 22:10:01.000000 ./usr/share/man/man9/sampler.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 433 2025-04-13 22:10:01.000000 ./usr/share/man/man9/scale.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 546 2025-04-13 22:10:01.000000 ./usr/share/man/man9/scaled_s32_sums.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 562 2025-04-13 22:10:01.000000 ./usr/share/man/man9/select8.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 547 2025-04-13 22:10:01.000000 ./usr/share/man/man9/scaled_s32_sums.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 561 2025-04-13 22:10:01.000000 ./usr/share/man/man9/select8.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 940 2025-04-13 22:10:01.000000 ./usr/share/man/man9/serport.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1909 2025-04-13 22:10:01.000000 ./usr/share/man/man9/setsserial.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1312 2025-04-13 22:10:01.000000 ./usr/share/man/man9/siggen.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1277 2025-04-13 22:10:01.000000 ./usr/share/man/man9/sim_axis_hardware.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1295 2025-04-13 22:10:01.000000 ./usr/share/man/man9/sim_encoder.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 712 2025-04-13 22:10:01.000000 ./usr/share/man/man9/sim_home_switch.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 501 2025-04-13 22:10:01.000000 ./usr/share/man/man9/sim_matrix_kb.9.gz │ │ │ @@ -4683,37 +4683,37 @@ │ │ │ -rw-r--r-- 0 root (0) root (0) 520 2025-04-13 22:10:01.000000 ./usr/share/man/man9/spindle_monitor.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 6157 2025-04-13 22:10:01.000000 ./usr/share/man/man9/sserial.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 3748 2025-04-13 22:10:01.000000 ./usr/share/man/man9/stepgen.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 806 2025-04-13 22:10:01.000000 ./usr/share/man/man9/steptest.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1943 2025-04-13 22:10:01.000000 ./usr/share/man/man9/streamer.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 516 2025-04-13 22:10:01.000000 ./usr/share/man/man9/sum2.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 831 2025-04-13 22:10:01.000000 ./usr/share/man/man9/supply.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 1370 2025-04-13 22:10:01.000000 ./usr/share/man/man9/thc.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 1369 2025-04-13 22:10:01.000000 ./usr/share/man/man9/thc.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1282 2025-04-13 22:10:01.000000 ./usr/share/man/man9/thcud.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1035 2025-04-13 22:10:01.000000 ./usr/share/man/man9/threads.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 389 2025-04-13 22:10:01.000000 ./usr/share/man/man9/threadtest.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 1207 2025-04-13 22:10:01.000000 ./usr/share/man/man9/time.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 388 2025-04-13 22:10:01.000000 ./usr/share/man/man9/threadtest.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 1206 2025-04-13 22:10:01.000000 ./usr/share/man/man9/time.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 609 2025-04-13 22:10:01.000000 ./usr/share/man/man9/timedelay.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 805 2025-04-13 22:10:01.000000 ./usr/share/man/man9/timedelta.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 476 2025-04-13 22:10:01.000000 ./usr/share/man/man9/tof.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 537 2025-04-13 22:10:01.000000 ./usr/share/man/man9/toggle.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 538 2025-04-13 22:10:01.000000 ./usr/share/man/man9/toggle.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 690 2025-04-13 22:10:01.000000 ./usr/share/man/man9/toggle2nist.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 475 2025-04-13 22:10:01.000000 ./usr/share/man/man9/ton.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 494 2025-04-13 22:10:01.000000 ./usr/share/man/man9/tp.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 913 2025-04-13 22:10:01.000000 ./usr/share/man/man9/tpcomp.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 480 2025-04-13 22:10:01.000000 ./usr/share/man/man9/tristate_bit.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 511 2025-04-13 22:10:01.000000 ./usr/share/man/man9/tristate_float.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 510 2025-04-13 22:10:01.000000 ./usr/share/man/man9/tristate_float.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 669 2025-04-13 22:10:01.000000 ./usr/share/man/man9/updown.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 1303 2025-04-13 22:10:01.000000 ./usr/share/man/man9/userkins.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 967 2025-04-13 22:10:01.000000 ./usr/share/man/man9/watchdog.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 540 2025-04-13 22:10:01.000000 ./usr/share/man/man9/wcomp.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 780 2025-04-13 22:10:01.000000 ./usr/share/man/man9/weighted_sum.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 811 2025-04-13 22:10:01.000000 ./usr/share/man/man9/xhc_hb04_util.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 814 2025-04-13 22:10:01.000000 ./usr/share/man/man9/xhc_hb04_util.9.gz │ │ │ -rw-r--r-- 0 root (0) root (0) 518 2025-04-13 22:10:01.000000 ./usr/share/man/man9/xor2.9.gz │ │ │ --rw-r--r-- 0 root (0) root (0) 896 2025-04-13 22:10:01.000000 ./usr/share/man/man9/xyzab_tdr_kins.9.gz │ │ │ +-rw-r--r-- 0 root (0) root (0) 897 2025-04-13 22:10:01.000000 ./usr/share/man/man9/xyzab_tdr_kins.9.gz │ │ │ drwxr-xr-x 0 root (0) root (0) 0 2025-04-13 22:10:01.000000 ./usr/share/metainfo/ │ │ │ -rw-r--r-- 0 root (0) root (0) 715 2025-01-25 12:52:00.000000 ./usr/share/metainfo/linuxcnc-uspace.metainfo.xml │ │ │ drwxr-xr-x 0 root (0) root (0) 0 2025-04-13 22:10:01.000000 ./usr/share/mime/ │ │ │ drwxr-xr-x 0 root (0) root (0) 0 2025-04-13 22:10:01.000000 ./usr/share/mime/packages/ │ │ │ -rw-r--r-- 0 root (0) root (0) 305 2025-01-25 12:52:00.000000 ./usr/share/mime/packages/linuxcnc-uspace.xml │ │ │ drwxr-xr-x 0 root (0) root (0) 0 2025-04-13 22:10:01.000000 ./usr/share/qtvcp/ │ │ │ drwxr-xr-x 0 root (0) root (0) 0 2025-04-13 22:10:01.000000 ./usr/share/qtvcp/images/ │ │ ├── ./etc/linuxcnc/rtapi.conf │ │ │ @@ -1,11 +1,11 @@ │ │ │ # DO NOT EDIT THIS FILE ! │ │ │ # │ │ │ # ../scripts/rtapi.conf. Generated from rtapi.conf.in by configure. │ │ │ -# on Sun Apr 13 23:16:39 UTC 2025 │ │ │ +# on Sat Jul 26 09:37:19 UTC 2025 │ │ │ # │ │ │ │ │ │ # A few parameters from emc2/Makefile.inc │ │ │ EMC2_HOME=/usr │ │ │ KERNELDIR= │ │ │ RTLIB_DIR=/usr/lib/linuxcnc/modules │ │ │ MODULE_EXT=.so │ │ ├── ./usr/lib/linuxcnc/realtime │ │ │ @@ -10,15 +10,15 @@ │ │ │ # removed when the job has ended and is used throughout the LinuxCNC │ │ │ # infrastructure. The script has no effect for the PREEMPT realtime kernel. │ │ │ # The script is not meant to be started a boot time - it could be, though. │ │ │ # X-Interactive: false │ │ │ ### END INIT INFO │ │ │ # │ │ │ # ../scripts/realtime. Generated from realtime.in by configure. │ │ │ -# on Sun Apr 13 23:16:39 UTC 2025 │ │ │ +# on Sat Jul 26 09:37:19 UTC 2025 │ │ │ # │ │ │ │ │ │ export LANG=C │ │ │ │ │ │ GREP=/usr/bin/grep │ │ │ PS=/usr/bin/ps │ │ ├── ./usr/share/man/man1/pi500_vfd.1.gz │ │ │ ├── pi500_vfd.1 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/user_comps/pi500_vfd/pi500_vfd.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH PI500_VFD "1" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH PI500_VFD "1" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ pi500_vfd \- Powtran PI500 Modbus driver │ │ │ │ .SH SYNOPSIS │ │ │ │ .B pi500_vfd │ │ │ │ .SH PINS │ │ │ │ .TP │ │ ├── ./usr/share/man/man1/thermistor.1.gz │ │ │ ├── thermistor.1 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/user_comps/thermistor.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH THERMISTOR "1" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH THERMISTOR "1" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ thermistor \- compute temperature indicated by a thermistor │ │ │ │ .SH SYNOPSIS │ │ │ │ .B thermistor │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man1/wj200_vfd.1.gz │ │ │ ├── wj200_vfd.1 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/user_comps/wj200_vfd/wj200_vfd.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH WJ200_VFD "1" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH WJ200_VFD "1" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ wj200_vfd \- Hitachi wj200 modbus driver │ │ │ │ .SH SYNOPSIS │ │ │ │ .B wj200_vfd │ │ │ │ .SH PINS │ │ │ │ .TP │ │ ├── ./usr/share/man/man9/abs.9.gz │ │ │ ├── abs.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/abs.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH ABS "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH ABS "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ abs \- Compute the absolute value and sign of the input signal │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt abs [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/abs_s32.9.gz │ │ │ ├── abs_s32.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/abs_s32.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH ABS_S32 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH ABS_S32 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ abs_s32 \- Compute the absolute value and sign of the input signal │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt abs_s32 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/and2.9.gz │ │ │ ├── and2.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/and2.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH AND2 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH AND2 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ and2 \- Two-input AND gate │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt and2 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/anglejog.9.gz │ │ │ ├── anglejog.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/anglejog.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH ANGLEJOG "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH ANGLEJOG "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ anglejog \- Jog two axes (or joints) at an angle │ │ │ │ .SH SYNOPSIS │ │ │ │ │ │ │ │ This component accepts a dynamic counts-in input (typically from a │ │ │ │ manual pulse generator (MPG)) and static angle and scale factor │ │ ├── ./usr/share/man/man9/axistest.9.gz │ │ │ ├── axistest.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/axistest.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH AXISTEST "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH AXISTEST "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ axistest \- Used to allow testing of an axis. Used IN PnCconf. │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt axistest [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/bin2gray.9.gz │ │ │ ├── bin2gray.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/bin2gray.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH BIN2GRAY "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH BIN2GRAY "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ bin2gray \- convert a number to the gray-code representation │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt bin2gray [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/biquad.9.gz │ │ │ ├── biquad.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/biquad.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH BIQUAD "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH BIQUAD "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ biquad \- Biquad IIR filter │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt biquad [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/bitslice.9.gz │ │ │ ├── bitslice.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/bitslice.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH BITSLICE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH BITSLICE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ bitslice \- Converts an unsigned-32 input into individual bits │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt bitslice [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] [personality=\fIP1,P2,...\fB] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/bitwise.9.gz │ │ │ ├── bitwise.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/bitwise.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH BITWISE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH BITWISE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ bitwise \- Computes various bitwise operations on the two input values │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt bitwise [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/bldc.9.gz │ │ │ ├── bldc.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/bldc.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH BLDC "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH BLDC "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ bldc \- BLDC and AC-servo control component │ │ │ │ .SH SYNOPSIS │ │ │ │ .B loadrt bldc cfg=qi6,aH\fB │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/blend.9.gz │ │ │ ├── blend.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/blend.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH BLEND "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH BLEND "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ blend \- Perform linear interpolation between two values │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt blend [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/carousel.9.gz │ │ │ ├── carousel.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/carousel.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CAROUSEL "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CAROUSEL "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ carousel \- Orient a toolchanger carousel using various encoding schemes │ │ │ │ .SH SYNOPSIS │ │ │ │ │ │ │ │ .B loadrt carousel pockets=\fIN\fR[,\fIN\fR] │ │ │ │ .B encoding=\fIssss\fR[,\fIsss\fR]\fB │ │ ├── ./usr/share/man/man9/charge_pump.9.gz │ │ │ ├── charge_pump.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/charge_pump.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CHARGE_PUMP "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CHARGE_PUMP "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ charge_pump \- Create a square-wave for the 'charge pump' input of some controller boards │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt charge_pump │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/clarke2.9.gz │ │ │ ├── clarke2.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/clarke2.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CLARKE2 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CLARKE2 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ clarke2 \- Two input version of Clarke transform │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt clarke2 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/clarke3.9.gz │ │ │ ├── clarke3.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/clarke3.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CLARKE3 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CLARKE3 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ clarke3 \- Clarke (3 phase to cartesian) transform │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt clarke3 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/clarkeinv.9.gz │ │ │ ├── clarkeinv.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/clarkeinv.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CLARKEINV "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CLARKEINV "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ clarkeinv \- Inverse Clarke transform │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt clarkeinv [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/comp.9.gz │ │ │ ├── comp.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/comp.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH COMP "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH COMP "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ comp \- Two input comparator with hysteresis │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt comp [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/constant.9.gz │ │ │ ├── constant.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/constant.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CONSTANT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CONSTANT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ constant \- Use a parameter to set the value of a pin │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt constant [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/conv_bit_float.9.gz │ │ │ ├── conv_bit_float.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/conv_bit_float.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CONV_BIT_FLOAT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CONV_BIT_FLOAT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ conv_bit_float \- Convert a value from bit to float │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt conv_bit_float [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/conv_bit_s32.9.gz │ │ │ ├── conv_bit_s32.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/conv_bit_s32.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CONV_BIT_S32 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CONV_BIT_S32 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ conv_bit_s32 \- Convert a value from bit to s32 │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt conv_bit_s32 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/conv_bit_u32.9.gz │ │ │ ├── conv_bit_u32.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/conv_bit_u32.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CONV_BIT_U32 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CONV_BIT_U32 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ conv_bit_u32 \- Convert a value from bit to u32 │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt conv_bit_u32 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/conv_float_s32.9.gz │ │ │ ├── conv_float_s32.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/conv_float_s32.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CONV_FLOAT_S32 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CONV_FLOAT_S32 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ conv_float_s32 \- Convert a value from float to s32 │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt conv_float_s32 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/conv_float_u32.9.gz │ │ │ ├── conv_float_u32.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/conv_float_u32.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CONV_FLOAT_U32 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CONV_FLOAT_U32 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ conv_float_u32 \- Convert a value from float to u32 │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt conv_float_u32 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/conv_s32_bit.9.gz │ │ │ ├── conv_s32_bit.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/conv_s32_bit.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CONV_S32_BIT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CONV_S32_BIT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ conv_s32_bit \- Convert a value from s32 to bit │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt conv_s32_bit [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/conv_s32_float.9.gz │ │ │ ├── conv_s32_float.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/conv_s32_float.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CONV_S32_FLOAT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CONV_S32_FLOAT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ conv_s32_float \- Convert a value from s32 to float │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt conv_s32_float [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/conv_s32_u32.9.gz │ │ │ ├── conv_s32_u32.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/conv_s32_u32.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CONV_S32_U32 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CONV_S32_U32 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ conv_s32_u32 \- Convert a value from s32 to u32 │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt conv_s32_u32 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/conv_u32_bit.9.gz │ │ │ ├── conv_u32_bit.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/conv_u32_bit.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CONV_U32_BIT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CONV_U32_BIT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ conv_u32_bit \- Convert a value from u32 to bit │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt conv_u32_bit [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/conv_u32_float.9.gz │ │ │ ├── conv_u32_float.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/conv_u32_float.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CONV_U32_FLOAT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CONV_U32_FLOAT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ conv_u32_float \- Convert a value from u32 to float │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt conv_u32_float [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/conv_u32_s32.9.gz │ │ │ ├── conv_u32_s32.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/conv_u32_s32.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH CONV_U32_S32 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH CONV_U32_S32 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ conv_u32_s32 \- Convert a value from u32 to s32 │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt conv_u32_s32 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/corexy_by_hal.9.gz │ │ │ ├── corexy_by_hal.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/corexy_by_hal.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH COREXY_BY_HAL "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH COREXY_BY_HAL "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ corexy_by_hal \- CoreXY kinematics │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt corexy_by_hal [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/dbounce.9.gz │ │ │ ├── dbounce.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/dbounce.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH DBOUNCE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH DBOUNCE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ dbounce \- alternative debounce component │ │ │ │ .SH SYNOPSIS │ │ │ │ │ │ │ │ This component is similar to the \fBdebounce\fR component │ │ ├── ./usr/share/man/man9/ddt.9.gz │ │ │ ├── ddt.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/ddt.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH DDT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH DDT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ ddt \- Compute the derivative of the input function │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt ddt [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/deadzone.9.gz │ │ │ ├── deadzone.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/deadzone.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH DEADZONE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH DEADZONE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ deadzone \- Return the center if within the threshold │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt deadzone [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/demux.9.gz │ │ │ ├── demux.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/demux.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH DEMUX "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH DEMUX "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ demux \- Select one of several output pins by integer and/or or individual bits. │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt demux [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] [personality=\fIP1,P2,...\fB] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/differential.9.gz │ │ │ ├── differential.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/differential.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH DIFFERENTIAL "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH DIFFERENTIAL "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ differential \- kinematics for a differential transmission │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt differential [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/div2.9.gz │ │ │ ├── div2.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/div2.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH DIV2 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH DIV2 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ div2 \- Quotient of two floating point inputs │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt div2 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/edge.9.gz │ │ │ ├── edge.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/edge.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH EDGE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH EDGE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ edge \- Edge detector │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt edge [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/eoffset_per_angle.9.gz │ │ │ ├── eoffset_per_angle.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/eoffset_per_angle.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH EOFFSET_PER_ANGLE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH EOFFSET_PER_ANGLE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ eoffset_per_angle \- Compute External Offset Per Angle │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt eoffset_per_angle [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/estop_latch.9.gz │ │ │ ├── estop_latch.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/estop_latch.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH ESTOP_LATCH "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH ESTOP_LATCH "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ estop_latch \- Software ESTOP latch │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt estop_latch [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/feedcomp.9.gz │ │ │ ├── feedcomp.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/feedcomp.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH FEEDCOMP "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH FEEDCOMP "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ feedcomp \- Multiply the input by the ratio of current velocity to the feed rate. │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt feedcomp [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/filter_kalman.9.gz │ │ │ ├── filter_kalman.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/filter_kalman.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH FILTER_KALMAN "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH FILTER_KALMAN "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ filter_kalman \- Unidimensional Kalman filter, also known as linear quadratic estimation (LQE) │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt filter_kalman [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/flipflop.9.gz │ │ │ ├── flipflop.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/flipflop.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH FLIPFLOP "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH FLIPFLOP "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ flipflop \- D type flip-flop │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt flipflop [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/gantry.9.gz │ │ │ ├── gantry.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/gantry.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH GANTRY "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH GANTRY "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ gantry \- LinuxCNC HAL component for driving multiple joints from a single axis. │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt gantry [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] [personality=\fIP1,P2,...\fB] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/gearchange.9.gz │ │ │ ├── gearchange.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/gearchange.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH GEARCHANGE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH GEARCHANGE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ gearchange \- Select from one two speed ranges │ │ │ │ .SH SYNOPSIS │ │ │ │ The output will be a value scaled for the selected gear, and clamped to │ │ │ │ the min/max values for that gear. │ │ │ │ The scale of gear 1 is assumed to be 1, so the output device scale │ │ ├── ./usr/share/man/man9/gray2bin.9.gz │ │ │ ├── gray2bin.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/gray2bin.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH GRAY2BIN "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH GRAY2BIN "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ gray2bin \- convert a gray-code input to binary │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt gray2bin [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/histobins.9.gz │ │ │ ├── histobins.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/histobins.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH HISTOBINS "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH HISTOBINS "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ histobins \- histogram bins utility for scripts/hal-histogram │ │ │ │ .SH SYNOPSIS │ │ │ │ │ │ │ │ Usage: │ │ │ │ Read availablebins pin for the number of bins available. │ │ ├── ./usr/share/man/man9/homecomp.9.gz │ │ │ ├── homecomp.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/homecomp.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH HOMECOMP "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH HOMECOMP "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ homecomp \- homing module template │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ Custom Homing module loaded with \fB[EMCMOT]HOMEMOD=homecomp\fR │ │ ├── ./usr/share/man/man9/hypot.9.gz │ │ │ ├── hypot.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/hypot.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH HYPOT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH HYPOT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ hypot \- Three-input hypotenuse (Euclidean distance) calculator │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt hypot [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/ilowpass.9.gz │ │ │ ├── ilowpass.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/ilowpass.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH ILOWPASS "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH ILOWPASS "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ ilowpass \- Low-pass filter with integer inputs and outputs │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt ilowpass [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/integ.9.gz │ │ │ ├── integ.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/integ.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH INTEG "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH INTEG "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ integ \- Integrator with gain pin and windup limits │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt integ [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/invert.9.gz │ │ │ ├── invert.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/invert.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH INVERT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH INVERT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ invert \- Compute the inverse of the input signal │ │ │ │ .SH SYNOPSIS │ │ │ │ The output will be the mathematical inverse of the input, ie \fBout\fR = 1/\fBin\fR. │ │ │ │ The parameter \fBdeadband\fR can be used to control how close to 0 the denominator can be │ │ │ │ before the output is clamped to 0. \fBdeadband\fR must be at least 1e-8, and must be positive. │ │ ├── ./usr/share/man/man9/joyhandle.9.gz │ │ │ ├── joyhandle.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/joyhandle.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH JOYHANDLE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH JOYHANDLE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ joyhandle \- sets nonlinear joypad movements, deadbands and scales │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt joyhandle [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/knob2float.9.gz │ │ │ ├── knob2float.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/knob2float.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH KNOB2FLOAT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH KNOB2FLOAT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ knob2float \- Convert counts (probably from an encoder) to a float value │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt knob2float [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/latencybins.9.gz │ │ │ ├── latencybins.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/latencybins.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH LATENCYBINS "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH LATENCYBINS "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ latencybins \- comp utility for scripts/latency-histogram │ │ │ │ .SH SYNOPSIS │ │ │ │ │ │ │ │ Usage: │ │ │ │ Read availablebins pin for the number of bins available. │ │ ├── ./usr/share/man/man9/limit1.9.gz │ │ │ ├── limit1.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/limit1.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH LIMIT1 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH LIMIT1 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ limit1 \- Limit the output signal to fall between min and max │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt limit1 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/limit2.9.gz │ │ │ ├── limit2.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/limit2.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH LIMIT2 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH LIMIT2 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ limit2 \- Limit the output signal to fall between min and max and limit its slew rate to less than maxv per second. When the signal is a position, this means that position and velocity are limited. │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt limit2 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/limit3.9.gz │ │ │ ├── limit3.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/limit3.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH LIMIT3 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH LIMIT3 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ limit3 \- Follow input signal while obeying limits │ │ │ │ .SH SYNOPSIS │ │ │ │ Limit the output signal to fall between min and max, limit its slew │ │ │ │ rate to less than maxv per second, and limit its second derivative to │ │ │ │ less than maxa per second squared. When the signal is a position, │ │ ├── ./usr/share/man/man9/limit_axis.9.gz │ │ │ ├── limit_axis.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/limit_axis.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH LIMIT_AXIS "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH LIMIT_AXIS "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ limit_axis \- Dynamic range based axis limits │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt limit_axis [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] [personality=\fIP1,P2,...\fB] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/lincurve.9.gz │ │ │ ├── lincurve.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/lincurve.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH LINCURVE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH LINCURVE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ lincurve \- one-dimensional lookup table │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt lincurve [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] [personality=\fIP1,P2,...\fB] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/logic.9.gz │ │ │ ├── logic.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/logic.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH LOGIC "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH LOGIC "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ logic \- LinuxCNC HAL component providing configurable logic functions │ │ │ │ .SH SYNOPSIS │ │ │ │ │ │ │ │ .B loadrt logic │ │ │ │ .B [count=N|names=name1[,name2...]] │ │ ├── ./usr/share/man/man9/lowpass.9.gz │ │ │ ├── lowpass.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/lowpass.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH LOWPASS "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH LOWPASS "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ lowpass \- Low-pass filter │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt lowpass [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/lut5.9.gz │ │ │ ├── lut5.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/lut5.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH LUT5 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH LUT5 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ lut5 \- Arbitrary 5-input logic function based on a look-up table │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt lut5 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ │ │ ├── html2text {} │ │ │ │ │ @@ -1,13 +1,13 @@ │ │ │ │ │ .\" -*- mode: troff; coding: utf-8 -*- │ │ │ │ │ .\"******************************************************************* .\" .\" │ │ │ │ │ This file was extracted from hal/components/lut5.comp using halcompile.g. .\" │ │ │ │ │ Modify the source file. .\" │ │ │ │ │ .\"******************************************************************* .TH LUT5 │ │ │ │ │ -"9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" .SH NAME lut5 \- │ │ │ │ │ +"9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" .SH NAME lut5 \- │ │ │ │ │ Arbitrary 5-input logic function based on a look-up table .SH SYNOPSIS .HP .B │ │ │ │ │ loadrt lut5 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] .SH DESCRIPTION │ │ │ │ │ .B lut5 constructs a logic function with up to 5 inputs using a \fBl\fRook- │ │ │ │ │ \fBu\fRp \fBt\fRable. The value for \fBfunction\fR can be determined by writing │ │ │ │ │ the truth table, and computing the sum of \fBall\fR the \fBweights\fR for which │ │ │ │ │ the output value would be \fRTRUE\fR. The weights are hexadecimal not decimal │ │ │ │ │ so hexadecimal math must be used to sum the weights. A wiki page has a │ │ ├── ./usr/share/man/man9/maj3.9.gz │ │ │ ├── maj3.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/maj3.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MAJ3 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MAJ3 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ maj3 \- Compute the majority of 3 inputs │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt maj3 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/match8.9.gz │ │ │ ├── match8.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/match8.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MATCH8 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MATCH8 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ match8 \- 8-bit binary match detector │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt match8 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/max31855.9.gz │ │ │ ├── max31855.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/max31855.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MAX31855 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MAX31855 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ max31855 \- Support for the MAX31855 Thermocouple-to-Digital converter using bitbanged spi │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt max31855 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] [personality=\fIP1,P2,...\fB] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/mesa_7i65.9.gz │ │ │ ├── mesa_7i65.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/drivers/mesa_7i65.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MESA_7I65 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MESA_7I65 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ mesa_7i65 \- Support for the Mesa 7i65 Octuple Servo Card │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt mesa_7i65 │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/mesa_pktgyro_test.9.gz │ │ │ ├── mesa_pktgyro_test.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/mesa_pktgyro_test.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MESA_PKTGYRO_TEST "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MESA_PKTGYRO_TEST "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ mesa_pktgyro_test \- PktUART simple test with Microstrain 3DM-GX3-15 gyro │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt mesa_pktgyro_test [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/mesa_uart.9.gz │ │ │ ├── mesa_uart.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/drivers/mesa_uart.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MESA_UART "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MESA_UART "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ mesa_uart \- An example component demonstrating how to access the Hostmot2 UART │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt mesa_uart [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/message.9.gz │ │ │ ├── message.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/message.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MESSAGE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MESSAGE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ message \- Display a message │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt message [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] [messages=\fIN\fB] │ │ │ │ .RS 4 │ │ ├── ./usr/share/man/man9/millturn.9.gz │ │ │ ├── millturn.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/millturn.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MILLTURN "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MILLTURN "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ millturn \- Switchable kinematics for a mill-turn machine │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt millturn [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/minmax.9.gz │ │ │ ├── minmax.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/minmax.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MINMAX "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MINMAX "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ minmax \- Track the minimum and maximum values of the input to the outputs │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt minmax [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/moveoff.9.gz │ │ │ ├── moveoff.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/moveoff.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MOVEOFF "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MOVEOFF "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ moveoff \- Component for HAL-only offsets │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt moveoff [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] [personality=\fIP1,P2,...\fB] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/mult2.9.gz │ │ │ ├── mult2.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/mult2.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MULT2 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MULT2 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ mult2 \- Product of two inputs │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt mult2 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/multiclick.9.gz │ │ │ ├── multiclick.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/multiclick.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MULTICLICK "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MULTICLICK "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ multiclick \- Single-, double-, triple-, and quadruple-click detector │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt multiclick [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/multiswitch.9.gz │ │ │ ├── multiswitch.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/multiswitch.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MULTISWITCH "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MULTISWITCH "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ multiswitch \- This component toggles between a specified number of output bits. │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt multiswitch personality=\fIP\fB [cfg=\fIN\fB] │ │ │ │ .RS 4 │ │ ├── ./usr/share/man/man9/mux16.9.gz │ │ │ ├── mux16.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/mux16.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MUX16 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MUX16 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ mux16 \- Select from one of sixteen input values │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt mux16 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/mux2.9.gz │ │ │ ├── mux2.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/mux2.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MUX2 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MUX2 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ mux2 \- Select from one of two input values │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt mux2 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/mux4.9.gz │ │ │ ├── mux4.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/mux4.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MUX4 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MUX4 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ mux4 \- Select from one of four input values │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt mux4 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/mux8.9.gz │ │ │ ├── mux8.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/mux8.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH MUX8 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH MUX8 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ mux8 \- Select from one of eight input values │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt mux8 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/near.9.gz │ │ │ ├── near.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/near.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH NEAR "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH NEAR "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ near \- Determine whether two values are roughly equal. │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt near [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/not.9.gz │ │ │ ├── not.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/not.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH NOT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH NOT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ not \- Inverter │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt not [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/offset.9.gz │ │ │ ├── offset.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/offset.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH OFFSET "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH OFFSET "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ offset \- Adds an offset to an input, and subtracts it from the feedback value. │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt offset [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/ohmic.9.gz │ │ │ ├── ohmic.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/ohmic.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH OHMIC "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH OHMIC "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ ohmic \- LinuxCNC HAL component that uses a Mesa THCAD for ohmic sensing │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt ohmic [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/oneshot.9.gz │ │ │ ├── oneshot.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/oneshot.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH ONESHOT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH ONESHOT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ oneshot \- one-shot pulse generator │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt oneshot [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/or2.9.gz │ │ │ ├── or2.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/or2.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH OR2 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH OR2 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ or2 \- Two-input OR gate │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt or2 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/orient.9.gz │ │ │ ├── orient.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/orient.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH ORIENT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH ORIENT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ orient \- Provide a PID command input for orientation mode based on current spindle position, target angle and orient mode │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt orient [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/plasmac.9.gz │ │ │ ├── plasmac.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/plasmac.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH PLASMAC "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH PLASMAC "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ plasmac \- A plasma cutter controller │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt plasmac │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/sample_hold.9.gz │ │ │ ├── sample_hold.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/sample_hold.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SAMPLE_HOLD "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SAMPLE_HOLD "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ sample_hold \- Sample and Hold │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt sample_hold [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/scale.9.gz │ │ │ ├── scale.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/scale.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SCALE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SCALE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ scale \- LinuxCNC HAL component that applies a scale and offset to its input │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt scale [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/scaled_s32_sums.9.gz │ │ │ ├── scaled_s32_sums.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/scaled_s32_sums.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SCALED_S32_SUMS "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SCALED_S32_SUMS "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ scaled_s32_sums \- Sum of four inputs (each with a scale) │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt scaled_s32_sums [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/select8.9.gz │ │ │ ├── select8.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/select8.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SELECT8 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SELECT8 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ select8 \- 8-bit binary match detector │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt select8 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/serport.9.gz │ │ │ ├── serport.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/drivers/serport.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SERPORT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SERPORT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ serport \- Hardware driver for the digital I/O bits of the 8250 and 16550 serial port. │ │ │ │ .SH SYNOPSIS │ │ │ │ │ │ │ │ .B loadrt serport io=\fIaddr[,addr...]\fR │ │ │ │ .PP │ │ ├── ./usr/share/man/man9/sim_axis_hardware.9.gz │ │ │ ├── sim_axis_hardware.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/sim_axis_hardware.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SIM_AXIS_HARDWARE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SIM_AXIS_HARDWARE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ sim_axis_hardware \- A component to simulate home and limit switches │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt sim_axis_hardware [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/sim_home_switch.9.gz │ │ │ ├── sim_home_switch.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/sim_home_switch.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SIM_HOME_SWITCH "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SIM_HOME_SWITCH "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ sim_home_switch \- Home switch simulator │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt sim_home_switch [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/sim_matrix_kb.9.gz │ │ │ ├── sim_matrix_kb.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/sim_matrix_kb.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SIM_MATRIX_KB "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SIM_MATRIX_KB "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ sim_matrix_kb \- convert HAL pin inputs to keycodes │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt sim_matrix_kb [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/sim_parport.9.gz │ │ │ ├── sim_parport.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/sim_parport.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SIM_PARPORT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SIM_PARPORT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ sim_parport \- A component to simulate the pins of the hal_parport component │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt sim_parport [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/sim_spindle.9.gz │ │ │ ├── sim_spindle.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/sim_spindle.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SIM_SPINDLE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SIM_SPINDLE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ sim_spindle \- Simulated spindle with index pulse │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt sim_spindle [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/simple_tp.9.gz │ │ │ ├── simple_tp.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/simple_tp.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SIMPLE_TP "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SIMPLE_TP "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ simple_tp \- This component is a single axis simple trajectory planner, same as used for jogging in LinuxCNC. │ │ │ │ .SH SYNOPSIS │ │ │ │ Used by PNCconf to allow testing of acceleration and velocity values for an axis. │ │ │ │ .SH FUNCTIONS │ │ │ │ .TP │ │ ├── ./usr/share/man/man9/sphereprobe.9.gz │ │ │ ├── sphereprobe.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/sphereprobe.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SPHEREPROBE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SPHEREPROBE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ sphereprobe \- Probe a pretend hemisphere │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt sphereprobe [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/spindle.9.gz │ │ │ ├── spindle.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/spindle.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SPINDLE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SPINDLE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ spindle \- Control a spindle with different acceleration and deceleration and optional gear change scaling │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt spindle [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/spindle_monitor.9.gz │ │ │ ├── spindle_monitor.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/spindle_monitor.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SPINDLE_MONITOR "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SPINDLE_MONITOR "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ spindle_monitor \- spindle at-speed and underspeed detection │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt spindle_monitor [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/steptest.9.gz │ │ │ ├── steptest.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/steptest.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH STEPTEST "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH STEPTEST "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ steptest \- Used by Stepconf to allow testing of acceleration and velocity values for an axis. │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt steptest [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/sum2.9.gz │ │ │ ├── sum2.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/sum2.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH SUM2 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH SUM2 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ sum2 \- Sum of two inputs (each with a gain) and an offset │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt sum2 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/thc.9.gz │ │ │ ├── thc.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/thc.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH THC "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH THC "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ thc \- Torch Height Control │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt thc │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/thcud.9.gz │ │ │ ├── thcud.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/thcud.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH THCUD "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH THCUD "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ thcud \- Torch Height Control Up/Down Input │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt thcud │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/threadtest.9.gz │ │ │ ├── threadtest.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/threadtest.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH THREADTEST "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH THREADTEST "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ threadtest \- LinuxCNC HAL component for testing thread behavior │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt threadtest [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/time.9.gz │ │ │ ├── time.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/time.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH TIME "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH TIME "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ time \- Time on in Hours, Minutes, Seconds │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt time [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/timedelay.9.gz │ │ │ ├── timedelay.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/timedelay.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH TIMEDELAY "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH TIMEDELAY "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ timedelay \- The equivalent of a time-delay relay │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt timedelay [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/timedelta.9.gz │ │ │ ├── timedelta.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/timedelta.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH TIMEDELTA "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH TIMEDELTA "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ timedelta \- LinuxCNC HAL component that measures thread scheduling timing behavior │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt timedelta [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/tof.9.gz │ │ │ ├── tof.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/tof.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH TOF "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH TOF "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ tof \- IEC TOF timer - delay falling edge on a signal │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt tof [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/toggle.9.gz │ │ │ ├── toggle.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/toggle.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH TOGGLE "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH TOGGLE "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ toggle \- 'push-on, push-off' from momentary pushbuttons │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt toggle [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/toggle2nist.9.gz │ │ │ ├── toggle2nist.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/toggle2nist.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH TOGGLE2NIST "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH TOGGLE2NIST "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ toggle2nist \- toggle button to nist logic │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt toggle2nist [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/ton.9.gz │ │ │ ├── ton.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/ton.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH TON "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH TON "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ ton \- IEC TON timer - delay rising edge on a signal │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt ton [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/tp.9.gz │ │ │ ├── tp.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/tp.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH TP "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH TP "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ tp \- IEC TP timer - generate a high pulse of defined duration on rising edge │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt tp [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/tpcomp.9.gz │ │ │ ├── tpcomp.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/tpcomp.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH TPCOMP "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH TPCOMP "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ tpcomp \- Trajectory Planning (tp) module skeleton │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ Custom Trajectory Planning module loaded with \fB[TRAJ]TPMOD=tpcomp\fR │ │ ├── ./usr/share/man/man9/tristate_bit.9.gz │ │ │ ├── tristate_bit.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/tristate_bit.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH TRISTATE_BIT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH TRISTATE_BIT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ tristate_bit \- Place a signal on an I/O pin only when enabled, similar to a tristate buffer in electronics │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt tristate_bit [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/tristate_float.9.gz │ │ │ ├── tristate_float.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/tristate_float.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH TRISTATE_FLOAT "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH TRISTATE_FLOAT "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ tristate_float \- Place a signal on an I/O pin only when enabled, similar to a tristate buffer in electronics │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt tristate_float [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/updown.9.gz │ │ │ ├── updown.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/updown.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH UPDOWN "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH UPDOWN "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ updown \- Counts up or down, with optional limits and wraparound behavior │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt updown [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/userkins.9.gz │ │ │ ├── userkins.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/userkins.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH USERKINS "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH USERKINS "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ userkins \- Template for user-built kinematics │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt userkins [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/wcomp.9.gz │ │ │ ├── wcomp.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/wcomp.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH WCOMP "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH WCOMP "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ wcomp \- Window comparator │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt wcomp [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/xhc_hb04_util.9.gz │ │ │ ├── xhc_hb04_util.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/xhc_hb04_util.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH XHC_HB04_UTIL "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH XHC_HB04_UTIL "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ xhc_hb04_util \- xhc-hb04 convenience utility │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt xhc_hb04_util [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION │ │ ├── ./usr/share/man/man9/xor2.9.gz │ │ │ ├── xor2.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/xor2.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH XOR2 "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH XOR2 "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ xor2 \- Two-input XOR (exclusive OR) gate │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt xor2 [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH FUNCTIONS │ │ ├── ./usr/share/man/man9/xyzab_tdr_kins.9.gz │ │ │ ├── xyzab_tdr_kins.9 │ │ │ │ @@ -2,15 +2,15 @@ │ │ │ │ .\"******************************************************************* │ │ │ │ .\" │ │ │ │ .\" This file was extracted from hal/components/xyzab_tdr_kins.comp using halcompile.g. │ │ │ │ .\" Modify the source file. │ │ │ │ .\" │ │ │ │ .\"******************************************************************* │ │ │ │ │ │ │ │ -.TH XYZAB_TDR_KINS "9" "2025-04-13" "LinuxCNC Documentation" "HAL Component" │ │ │ │ +.TH XYZAB_TDR_KINS "9" "2025-07-26" "LinuxCNC Documentation" "HAL Component" │ │ │ │ .SH NAME │ │ │ │ │ │ │ │ xyzab_tdr_kins \- Switchable kinematics for 5 axis machine with rotary table A and B │ │ │ │ .SH SYNOPSIS │ │ │ │ .HP │ │ │ │ .B loadrt xyzab_tdr_kins [count=\fIN\fB|names=\fIname1\fB[,\fIname2...\fB]] │ │ │ │ .SH DESCRIPTION