--- /srv/rebuilderd/tmp/rebuilderdsg98lG/inputs/sumo_1.25.0+dfsg1-1_ppc64el.deb
+++ /srv/rebuilderd/tmp/rebuilderdsg98lG/out/sumo_1.25.0+dfsg1-1_ppc64el.deb
├── file list
│ @@ -1,3 +1,3 @@
│  -rw-r--r--   0        0        0        4 2025-11-16 07:43:05.000000 debian-binary
│  -rw-r--r--   0        0        0     6516 2025-11-16 07:43:05.000000 control.tar.xz
│ --rw-r--r--   0        0        0 40695256 2025-11-16 07:43:05.000000 data.tar.xz
│ +-rw-r--r--   0        0        0 40689328 2025-11-16 07:43:05.000000 data.tar.xz
├── control.tar.xz
│ ├── control.tar
│ │ ├── ./md5sums
│ │ │ ├── ./md5sums
│ │ │ │┄ Files differ
├── data.tar.xz
│ ├── data.tar
│ │ ├── file list
│ │ │ @@ -226,25 +226,25 @@
│ │ │  -rw-r--r--   0 root         (0) root         (0)       76 2025-11-12 20:54:22.000000 ./usr/share/doc/sumo/changelog.gz
│ │ │  -rw-r--r--   0 root         (0) root         (0)    30782 2025-11-12 21:06:10.000000 ./usr/share/doc/sumo/copyright
│ │ │  drwxr-xr-x   0 root         (0) root         (0)        0 2025-11-16 07:43:05.000000 ./usr/share/lintian/
│ │ │  drwxr-xr-x   0 root         (0) root         (0)        0 2025-11-16 07:43:05.000000 ./usr/share/lintian/overrides/
│ │ │  -rw-r--r--   0 root         (0) root         (0)      363 2025-10-14 21:06:09.000000 ./usr/share/lintian/overrides/sumo
│ │ │  drwxr-xr-x   0 root         (0) root         (0)        0 2025-11-16 07:43:05.000000 ./usr/share/man/
│ │ │  drwxr-xr-x   0 root         (0) root         (0)        0 2025-11-16 07:43:05.000000 ./usr/share/man/man1/
│ │ │ --rw-r--r--   0 root         (0) root         (0)     2265 2025-11-16 07:43:05.000000 ./usr/share/man/man1/activitygen.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)     3243 2025-11-16 07:43:05.000000 ./usr/share/man/man1/dfrouter.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)     4607 2025-11-16 07:43:05.000000 ./usr/share/man/man1/duarouter.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)     2555 2025-11-16 07:43:05.000000 ./usr/share/man/man1/emissionsDrivingCycle.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)     2273 2025-11-16 07:43:05.000000 ./usr/share/man/man1/emissionsMap.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)     3656 2025-11-16 07:43:05.000000 ./usr/share/man/man1/jtrrouter.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)     4206 2025-11-16 07:43:05.000000 ./usr/share/man/man1/marouter.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)    10963 2025-11-16 07:43:05.000000 ./usr/share/man/man1/netconvert.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)    12305 2025-11-16 07:43:05.000000 ./usr/share/man/man1/netedit.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)     7744 2025-11-16 07:43:05.000000 ./usr/share/man/man1/netgenerate.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)     2645 2025-11-16 07:43:05.000000 ./usr/share/man/man1/od2trips.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)     3233 2025-11-16 07:43:05.000000 ./usr/share/man/man1/polyconvert.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)    14013 2025-11-16 07:43:05.000000 ./usr/share/man/man1/sumo-gui.1.gz
│ │ │ --rw-r--r--   0 root         (0) root         (0)    13999 2025-11-16 07:43:05.000000 ./usr/share/man/man1/sumo.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)     2270 2025-11-16 07:43:05.000000 ./usr/share/man/man1/activitygen.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)     3248 2025-11-16 07:43:05.000000 ./usr/share/man/man1/dfrouter.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)     4612 2025-11-16 07:43:05.000000 ./usr/share/man/man1/duarouter.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)     2561 2025-11-16 07:43:05.000000 ./usr/share/man/man1/emissionsDrivingCycle.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)     2279 2025-11-16 07:43:05.000000 ./usr/share/man/man1/emissionsMap.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)     3662 2025-11-16 07:43:05.000000 ./usr/share/man/man1/jtrrouter.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)     4212 2025-11-16 07:43:05.000000 ./usr/share/man/man1/marouter.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)    10969 2025-11-16 07:43:05.000000 ./usr/share/man/man1/netconvert.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)    12311 2025-11-16 07:43:05.000000 ./usr/share/man/man1/netedit.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)     7749 2025-11-16 07:43:05.000000 ./usr/share/man/man1/netgenerate.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)     2649 2025-11-16 07:43:05.000000 ./usr/share/man/man1/od2trips.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)     3238 2025-11-16 07:43:05.000000 ./usr/share/man/man1/polyconvert.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)    14018 2025-11-16 07:43:05.000000 ./usr/share/man/man1/sumo-gui.1.gz
│ │ │ +-rw-r--r--   0 root         (0) root         (0)    14005 2025-11-16 07:43:05.000000 ./usr/share/man/man1/sumo.1.gz
│ │ │  drwxr-xr-x   0 root         (0) root         (0)        0 2025-11-16 07:43:05.000000 ./usr/share/metainfo/
│ │ │  -rw-r--r--   0 root         (0) root         (0)      378 2025-10-13 17:54:40.000000 ./usr/share/metainfo/sumo.metainfo.xml
│ │ │  drwxr-xr-x   0 root         (0) root         (0)        0 2025-11-16 07:43:05.000000 ./usr/share/pixmaps/
│ │ │  -rw-r--r--   0 root         (0) root         (0)   135896 2025-10-13 17:54:40.000000 ./usr/share/pixmaps/sumo.xpm
│ │ ├── ./usr/bin/activitygen
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 56afd1f1d75468a57dac2d5233b3648043cea450
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 53f4f15451687d713451b705bea59c471c5827f3
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │ -P/lib64/ld64.so.2
│ │ │ │ +/lib64/ld64.so.2
│ │ │ │  %JH}&'GT
│ │ │ │  /93($R U
│ │ │ │  v	AlEy@ h<b
│ │ │ │  _ITM_deregisterTMCloneTable
│ │ │ │  __gmon_start__
│ │ │ │  _ITM_registerTMCloneTable
│ │ │ │  _ZN11xercesc_3_214DefaultHandler13resolveEntityEPKDsS2_
│ │ │ │ @@ -3807,15 +3807,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -418460,15 +418460,15 @@
│ │ │ │  	bl      25be0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1080>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      251e0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1a80>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-9
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,-368
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      26000 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xc60>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      253a0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x18c0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -4362,20 +4362,20 @@
│ │ │ │    0x002a7330 69612025 2e000000 3c73756d 6f40646c ia %....<sumo@dl
│ │ │ │    0x002a7340 722e6465 3e000000 4f707469 6f6e7320 r.de>...Options 
│ │ │ │    0x002a7350 7365743a 00000000 3a203c49 4e56414c set:....: <INVAL
│ │ │ │    0x002a7360 49443e00 00000000 6c616e67 75616765 ID>.....language
│ │ │ │    0x002a7370 00000000 00000000 20427569 6c642066 ........ Build f
│ │ │ │    0x002a7380 65617475 7265733a 20000000 00000000 eatures: .......
│ │ │ │    0x002a7390 4c696e75 782d362e 31322e35 372b6465 Linux-6.12.57+de
│ │ │ │ -  0x002a73a0 6231332d 706f7765 72706336 346c6520 b13-powerpc64le 
│ │ │ │ -  0x002a73b0 70706336 346c6520 474e5520 31352e32 ppc64le GNU 15.2
│ │ │ │ -  0x002a73c0 2e30204e 6f6e6520 464d4920 50726f6a .0 None FMI Proj
│ │ │ │ -  0x002a73d0 20475549 20496e74 6c205357 49472045  GUI Intl SWIG E
│ │ │ │ -  0x002a73e0 6967656e 20474441 4c204646 6d706567 igen GDAL FFmpeg
│ │ │ │ -  0x002a73f0 204f5347 20474c32 50530000 00000000  OSG GL2PS......
│ │ │ │ +  0x002a73a0 6231332d 706f7765 72706336 346c652d b13-powerpc64le-
│ │ │ │ +  0x002a73b0 36346b20 70706336 346c6520 474e5520 64k ppc64le GNU 
│ │ │ │ +  0x002a73c0 31352e32 2e30204e 6f6e6520 464d4920 15.2.0 None FMI 
│ │ │ │ +  0x002a73d0 50726f6a 20475549 20496e74 6c205357 Proj GUI Intl SW
│ │ │ │ +  0x002a73e0 49472045 6967656e 20474441 4c204646 IG Eigen GDAL FF
│ │ │ │ +  0x002a73f0 6d706567 204f5347 20474c32 50530000 mpeg OSG GL2PS..
│ │ │ │    0x002a7400 204c6963 656e7365 2045504c 2d322e30  License EPL-2.0
│ │ │ │    0x002a7410 3a204563 6c697073 65205075 626c6963 : Eclipse Public
│ │ │ │    0x002a7420 204c6963 656e7365 20566572 73696f6e  License Version
│ │ │ │    0x002a7430 2032203c 68747470 733a2f2f 65636c69  2 <https://ecli
│ │ │ │    0x002a7440 7073652e 6f72672f 6c656761 6c2f6570 pse.org/legal/ep
│ │ │ │    0x002a7450 6c2d7632 302e6874 6d6c3e00 00000000 l-v20.html>.....
│ │ │ │    0x002a7460 20557365 202d2d68 656c7020 746f2067  Use --help to g
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 61666431 66316437 35343638 61353764 afd1f1d75468a57d
│ │ │ │ -  0x00000010 61633264 35323333 62333634 38303433 ac2d5233b3648043
│ │ │ │ -  0x00000020 63656134 35302e64 65627567 00000000 cea450.debug....
│ │ │ │ -  0x00000030 216fb198                            !o..
│ │ │ │ +  0x00000000 66346631 35343531 36383764 37313334 f4f15451687d7134
│ │ │ │ +  0x00000010 35316237 30356265 61353963 34373163 51b705bea59c471c
│ │ │ │ +  0x00000020 35383237 66332e64 65627567 00000000 5827f3.debug....
│ │ │ │ +  0x00000030 a50d61a2                            ..a.
│ │ ├── ./usr/bin/dfrouter
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 86ba82fe0f0fe4351f230862ef575e94c6769121
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 5e8c02a34e7dca0c9aa01618517220175899300e
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │ -!/lib64/ld64.so.2
│ │ │ │ +/lib64/ld64.so.2
│ │ │ │  %JH}&'GT
│ │ │ │  /93($R U
│ │ │ │  v	AlEy@ h<b
│ │ │ │  _ITM_deregisterTMCloneTable
│ │ │ │  __gmon_start__
│ │ │ │  _ITM_registerTMCloneTable
│ │ │ │  _ZN11xercesc_3_214DefaultHandler13resolveEntityEPKDsS2_
│ │ │ │ @@ -4175,15 +4175,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -486938,15 +486938,15 @@
│ │ │ │  	bl      27e60 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xbe0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      28300 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x740>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-9
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,-6592
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      28120 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x920>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      289e0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x60>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -5241,20 +5241,20 @@
│ │ │ │    0x002f5ae0 69612025 2e000000 3c73756d 6f40646c ia %....<sumo@dl
│ │ │ │    0x002f5af0 722e6465 3e000000 4f707469 6f6e7320 r.de>...Options 
│ │ │ │    0x002f5b00 7365743a 00000000 3a203c49 4e56414c set:....: <INVAL
│ │ │ │    0x002f5b10 49443e00 00000000 6c616e67 75616765 ID>.....language
│ │ │ │    0x002f5b20 00000000 00000000 20427569 6c642066 ........ Build f
│ │ │ │    0x002f5b30 65617475 7265733a 20000000 00000000 eatures: .......
│ │ │ │    0x002f5b40 4c696e75 782d362e 31322e35 372b6465 Linux-6.12.57+de
│ │ │ │ -  0x002f5b50 6231332d 706f7765 72706336 346c6520 b13-powerpc64le 
│ │ │ │ -  0x002f5b60 70706336 346c6520 474e5520 31352e32 ppc64le GNU 15.2
│ │ │ │ -  0x002f5b70 2e30204e 6f6e6520 464d4920 50726f6a .0 None FMI Proj
│ │ │ │ -  0x002f5b80 20475549 20496e74 6c205357 49472045  GUI Intl SWIG E
│ │ │ │ -  0x002f5b90 6967656e 20474441 4c204646 6d706567 igen GDAL FFmpeg
│ │ │ │ -  0x002f5ba0 204f5347 20474c32 50530000 00000000  OSG GL2PS......
│ │ │ │ +  0x002f5b50 6231332d 706f7765 72706336 346c652d b13-powerpc64le-
│ │ │ │ +  0x002f5b60 36346b20 70706336 346c6520 474e5520 64k ppc64le GNU 
│ │ │ │ +  0x002f5b70 31352e32 2e30204e 6f6e6520 464d4920 15.2.0 None FMI 
│ │ │ │ +  0x002f5b80 50726f6a 20475549 20496e74 6c205357 Proj GUI Intl SW
│ │ │ │ +  0x002f5b90 49472045 6967656e 20474441 4c204646 IG Eigen GDAL FF
│ │ │ │ +  0x002f5ba0 6d706567 204f5347 20474c32 50530000 mpeg OSG GL2PS..
│ │ │ │    0x002f5bb0 204c6963 656e7365 2045504c 2d322e30  License EPL-2.0
│ │ │ │    0x002f5bc0 3a204563 6c697073 65205075 626c6963 : Eclipse Public
│ │ │ │    0x002f5bd0 204c6963 656e7365 20566572 73696f6e  License Version
│ │ │ │    0x002f5be0 2032203c 68747470 733a2f2f 65636c69  2 <https://ecli
│ │ │ │    0x002f5bf0 7073652e 6f72672f 6c656761 6c2f6570 pse.org/legal/ep
│ │ │ │    0x002f5c00 6c2d7632 302e6874 6d6c3e00 00000000 l-v20.html>.....
│ │ │ │    0x002f5c10 20557365 202d2d68 656c7020 746f2067  Use --help to g
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 62613832 66653066 30666534 33353166 ba82fe0f0fe4351f
│ │ │ │ -  0x00000010 32333038 36326566 35373565 39346336 230862ef575e94c6
│ │ │ │ -  0x00000020 37363931 32312e64 65627567 00000000 769121.debug....
│ │ │ │ -  0x00000030 ed41c3ef                            .A..
│ │ │ │ +  0x00000000 38633032 61333465 37646361 30633961 8c02a34e7dca0c9a
│ │ │ │ +  0x00000010 61303136 31383531 37323230 31373538 a016185172201758
│ │ │ │ +  0x00000020 39393330 30652e64 65627567 00000000 99300e.debug....
│ │ │ │ +  0x00000030 57e498de                            W...
│ │ ├── ./usr/bin/duarouter
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 3e79521902d360bd790d166a6e6505a7e208ff4c
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 758652f5f8263cbbb153c8f93200986d0bcddae1
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │ -L/lib64/ld64.so.2
│ │ │ │ +/lib64/ld64.so.2
│ │ │ │  %JH}&'GT
│ │ │ │  /93($R U
│ │ │ │  v	AlEy@ h<b
│ │ │ │  _ITM_deregisterTMCloneTable
│ │ │ │  __gmon_start__
│ │ │ │  _ITM_registerTMCloneTable
│ │ │ │  _ZN11xercesc_3_214DefaultHandler13resolveEntityEPKDsS2_
│ │ │ │ @@ -4354,15 +4354,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -524540,15 +524540,15 @@
│ │ │ │  	bl      27940 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1ba0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      28f00 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x5e0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-10
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,-16808
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      27c20 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x18c0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      27700 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1de0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -5891,20 +5891,20 @@
│ │ │ │    0x00313400 3c73756d 6f40646c 722e6465 3e000000 <sumo@dlr.de>...
│ │ │ │    0x00313410 4f707469 6f6e7320 7365743a 00000000 Options set:....
│ │ │ │    0x00313420 3a203c49 4e56414c 49443e00 00000000 : <INVALID>.....
│ │ │ │    0x00313430 6c616e67 75616765 00000000 00000000 language........
│ │ │ │    0x00313440 20427569 6c642066 65617475 7265733a  Build features:
│ │ │ │    0x00313450 20000000 00000000 4c696e75 782d362e  .......Linux-6.
│ │ │ │    0x00313460 31322e35 372b6465 6231332d 706f7765 12.57+deb13-powe
│ │ │ │ -  0x00313470 72706336 346c6520 70706336 346c6520 rpc64le ppc64le 
│ │ │ │ -  0x00313480 474e5520 31352e32 2e30204e 6f6e6520 GNU 15.2.0 None 
│ │ │ │ -  0x00313490 464d4920 50726f6a 20475549 20496e74 FMI Proj GUI Int
│ │ │ │ -  0x003134a0 6c205357 49472045 6967656e 20474441 l SWIG Eigen GDA
│ │ │ │ -  0x003134b0 4c204646 6d706567 204f5347 20474c32 L FFmpeg OSG GL2
│ │ │ │ -  0x003134c0 50530000 00000000 204c6963 656e7365 PS...... License
│ │ │ │ +  0x00313470 72706336 346c652d 36346b20 70706336 rpc64le-64k ppc6
│ │ │ │ +  0x00313480 346c6520 474e5520 31352e32 2e30204e 4le GNU 15.2.0 N
│ │ │ │ +  0x00313490 6f6e6520 464d4920 50726f6a 20475549 one FMI Proj GUI
│ │ │ │ +  0x003134a0 20496e74 6c205357 49472045 6967656e  Intl SWIG Eigen
│ │ │ │ +  0x003134b0 20474441 4c204646 6d706567 204f5347  GDAL FFmpeg OSG
│ │ │ │ +  0x003134c0 20474c32 50530000 204c6963 656e7365  GL2PS.. License
│ │ │ │    0x003134d0 2045504c 2d322e30 3a204563 6c697073  EPL-2.0: Eclips
│ │ │ │    0x003134e0 65205075 626c6963 204c6963 656e7365 e Public License
│ │ │ │    0x003134f0 20566572 73696f6e 2032203c 68747470  Version 2 <http
│ │ │ │    0x00313500 733a2f2f 65636c69 7073652e 6f72672f s://eclipse.org/
│ │ │ │    0x00313510 6c656761 6c2f6570 6c2d7632 302e6874 legal/epl-v20.ht
│ │ │ │    0x00313520 6d6c3e00 00000000 20557365 202d2d68 ml>..... Use --h
│ │ │ │    0x00313530 656c7020 746f2067 65742074 6865206c elp to get the l
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 37393532 31393032 64333630 62643739 79521902d360bd79
│ │ │ │ -  0x00000010 30643136 36613665 36353035 61376532 0d166a6e6505a7e2
│ │ │ │ -  0x00000020 30386666 34632e64 65627567 00000000 08ff4c.debug....
│ │ │ │ -  0x00000030 3a053046                            :.0F
│ │ │ │ +  0x00000000 38363532 66356638 32363363 62626231 8652f5f8263cbbb1
│ │ │ │ +  0x00000010 35336338 66393332 30303938 36643062 53c8f93200986d0b
│ │ │ │ +  0x00000020 63646461 65312e64 65627567 00000000 cddae1.debug....
│ │ │ │ +  0x00000030 516d1b35                            Qm.5
│ │ ├── ./usr/bin/emissionsDrivingCycle
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 47a72975e04c42235d9aa04e57bfa7e529ed8821
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 5f247fb929f7059ab9c2a177a098a2067ba6fc0d
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │ -!/lib64/ld64.so.2
│ │ │ │ +/lib64/ld64.so.2
│ │ │ │  _ITM_deregisterTMCloneTable
│ │ │ │  __gmon_start__
│ │ │ │  _ITM_registerTMCloneTable
│ │ │ │  _ZN11xercesc_3_214DefaultHandler13resolveEntityEPKDsS2_
│ │ │ │  _ZThn32_N11xercesc_3_214DefaultHandler8endCDATAEv
│ │ │ │  _ZThn40_N11xercesc_3_214DefaultHandler11elementDeclEPKDsS2_
│ │ │ │  _ZTIN11xercesc_3_215DocumentHandlerE
│ │ │ │ @@ -3022,15 +3022,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -278898,15 +278898,15 @@
│ │ │ │  	bl      20820 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xec0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      211e0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x500>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-8
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,28552
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      20660 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1080>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      21620 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xc0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -3607,20 +3607,20 @@
│ │ │ │    0x0020e730 3c73756d 6f40646c 722e6465 3e000000 <sumo@dlr.de>...
│ │ │ │    0x0020e740 4f707469 6f6e7320 7365743a 00000000 Options set:....
│ │ │ │    0x0020e750 3a203c49 4e56414c 49443e00 00000000 : <INVALID>.....
│ │ │ │    0x0020e760 6c616e67 75616765 00000000 00000000 language........
│ │ │ │    0x0020e770 20427569 6c642066 65617475 7265733a  Build features:
│ │ │ │    0x0020e780 20000000 00000000 4c696e75 782d362e  .......Linux-6.
│ │ │ │    0x0020e790 31322e35 372b6465 6231332d 706f7765 12.57+deb13-powe
│ │ │ │ -  0x0020e7a0 72706336 346c6520 70706336 346c6520 rpc64le ppc64le 
│ │ │ │ -  0x0020e7b0 474e5520 31352e32 2e30204e 6f6e6520 GNU 15.2.0 None 
│ │ │ │ -  0x0020e7c0 464d4920 50726f6a 20475549 20496e74 FMI Proj GUI Int
│ │ │ │ -  0x0020e7d0 6c205357 49472045 6967656e 20474441 l SWIG Eigen GDA
│ │ │ │ -  0x0020e7e0 4c204646 6d706567 204f5347 20474c32 L FFmpeg OSG GL2
│ │ │ │ -  0x0020e7f0 50530000 00000000 204c6963 656e7365 PS...... License
│ │ │ │ +  0x0020e7a0 72706336 346c652d 36346b20 70706336 rpc64le-64k ppc6
│ │ │ │ +  0x0020e7b0 346c6520 474e5520 31352e32 2e30204e 4le GNU 15.2.0 N
│ │ │ │ +  0x0020e7c0 6f6e6520 464d4920 50726f6a 20475549 one FMI Proj GUI
│ │ │ │ +  0x0020e7d0 20496e74 6c205357 49472045 6967656e  Intl SWIG Eigen
│ │ │ │ +  0x0020e7e0 20474441 4c204646 6d706567 204f5347  GDAL FFmpeg OSG
│ │ │ │ +  0x0020e7f0 20474c32 50530000 204c6963 656e7365  GL2PS.. License
│ │ │ │    0x0020e800 2045504c 2d322e30 3a204563 6c697073  EPL-2.0: Eclips
│ │ │ │    0x0020e810 65205075 626c6963 204c6963 656e7365 e Public License
│ │ │ │    0x0020e820 20566572 73696f6e 2032203c 68747470  Version 2 <http
│ │ │ │    0x0020e830 733a2f2f 65636c69 7073652e 6f72672f s://eclipse.org/
│ │ │ │    0x0020e840 6c656761 6c2f6570 6c2d7632 302e6874 legal/epl-v20.ht
│ │ │ │    0x0020e850 6d6c3e00 00000000 20557365 202d2d68 ml>..... Use --h
│ │ │ │    0x0020e860 656c7020 746f2067 65742074 6865206c elp to get the l
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 61373239 37356530 34633432 32333564 a72975e04c42235d
│ │ │ │ -  0x00000010 39616130 34653537 62666137 65353239 9aa04e57bfa7e529
│ │ │ │ -  0x00000020 65643838 32312e64 65627567 00000000 ed8821.debug....
│ │ │ │ -  0x00000030 89c64eea                            ..N.
│ │ │ │ +  0x00000000 32343766 62393239 66373035 39616239 247fb929f7059ab9
│ │ │ │ +  0x00000010 63326131 37376130 39386132 30363762 c2a177a098a2067b
│ │ │ │ +  0x00000020 61366663 30642e64 65627567 00000000 a6fc0d.debug....
│ │ │ │ +  0x00000030 02fa80fe                            ....
│ │ ├── ./usr/bin/emissionsMap
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: d97a1ef5efc311974754023006e156e4bc67bd88
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: d5ed2da2287d8010a2a722823903e600289d1bec
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -2961,15 +2961,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -270084,15 +270084,15 @@
│ │ │ │  	bl      20880 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xc20>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      20980 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xb20>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-7
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,-17344
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      20f60 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x540>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      20820 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xc80>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -3505,20 +3505,20 @@
│ │ │ │    0x002033e0 69612025 2e000000 3c73756d 6f40646c ia %....<sumo@dl
│ │ │ │    0x002033f0 722e6465 3e000000 4f707469 6f6e7320 r.de>...Options 
│ │ │ │    0x00203400 7365743a 00000000 3a203c49 4e56414c set:....: <INVAL
│ │ │ │    0x00203410 49443e00 00000000 6c616e67 75616765 ID>.....language
│ │ │ │    0x00203420 00000000 00000000 20427569 6c642066 ........ Build f
│ │ │ │    0x00203430 65617475 7265733a 20000000 00000000 eatures: .......
│ │ │ │    0x00203440 4c696e75 782d362e 31322e35 372b6465 Linux-6.12.57+de
│ │ │ │ -  0x00203450 6231332d 706f7765 72706336 346c6520 b13-powerpc64le 
│ │ │ │ -  0x00203460 70706336 346c6520 474e5520 31352e32 ppc64le GNU 15.2
│ │ │ │ -  0x00203470 2e30204e 6f6e6520 464d4920 50726f6a .0 None FMI Proj
│ │ │ │ -  0x00203480 20475549 20496e74 6c205357 49472045  GUI Intl SWIG E
│ │ │ │ -  0x00203490 6967656e 20474441 4c204646 6d706567 igen GDAL FFmpeg
│ │ │ │ -  0x002034a0 204f5347 20474c32 50530000 00000000  OSG GL2PS......
│ │ │ │ +  0x00203450 6231332d 706f7765 72706336 346c652d b13-powerpc64le-
│ │ │ │ +  0x00203460 36346b20 70706336 346c6520 474e5520 64k ppc64le GNU 
│ │ │ │ +  0x00203470 31352e32 2e30204e 6f6e6520 464d4920 15.2.0 None FMI 
│ │ │ │ +  0x00203480 50726f6a 20475549 20496e74 6c205357 Proj GUI Intl SW
│ │ │ │ +  0x00203490 49472045 6967656e 20474441 4c204646 IG Eigen GDAL FF
│ │ │ │ +  0x002034a0 6d706567 204f5347 20474c32 50530000 mpeg OSG GL2PS..
│ │ │ │    0x002034b0 204c6963 656e7365 2045504c 2d322e30  License EPL-2.0
│ │ │ │    0x002034c0 3a204563 6c697073 65205075 626c6963 : Eclipse Public
│ │ │ │    0x002034d0 204c6963 656e7365 20566572 73696f6e  License Version
│ │ │ │    0x002034e0 2032203c 68747470 733a2f2f 65636c69  2 <https://ecli
│ │ │ │    0x002034f0 7073652e 6f72672f 6c656761 6c2f6570 pse.org/legal/ep
│ │ │ │    0x00203500 6c2d7632 302e6874 6d6c3e00 00000000 l-v20.html>.....
│ │ │ │    0x00203510 20557365 202d2d68 656c7020 746f2067  Use --help to g
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 37613165 66356566 63333131 39373437 7a1ef5efc3119747
│ │ │ │ -  0x00000010 35343032 33303036 65313536 65346263 54023006e156e4bc
│ │ │ │ -  0x00000020 36376264 38382e64 65627567 00000000 67bd88.debug....
│ │ │ │ -  0x00000030 d470a738                            .p.8
│ │ │ │ +  0x00000000 65643264 61323238 37643830 31306132 ed2da2287d8010a2
│ │ │ │ +  0x00000010 61373232 38323339 30336536 30303238 a722823903e60028
│ │ │ │ +  0x00000020 39643162 65632e64 65627567 00000000 9d1bec.debug....
│ │ │ │ +  0x00000030 d84ebf0d                            .N..
│ │ ├── ./usr/bin/jtrrouter
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 187747447590b0b3be9724236756e6eb5f37971a
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 5804421554e472dd7f5772db96383efde16857af
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -4037,15 +4037,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -457546,15 +457546,15 @@
│ │ │ │  	bl      27a80 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xce0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      27580 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x11e0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-9
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,-11304
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      27c40 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xb20>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      272a0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x14c0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -5115,20 +5115,20 @@
│ │ │ │    0x002d4980 3c73756d 6f40646c 722e6465 3e000000 <sumo@dlr.de>...
│ │ │ │    0x002d4990 4f707469 6f6e7320 7365743a 00000000 Options set:....
│ │ │ │    0x002d49a0 3a203c49 4e56414c 49443e00 00000000 : <INVALID>.....
│ │ │ │    0x002d49b0 6c616e67 75616765 00000000 00000000 language........
│ │ │ │    0x002d49c0 20427569 6c642066 65617475 7265733a  Build features:
│ │ │ │    0x002d49d0 20000000 00000000 4c696e75 782d362e  .......Linux-6.
│ │ │ │    0x002d49e0 31322e35 372b6465 6231332d 706f7765 12.57+deb13-powe
│ │ │ │ -  0x002d49f0 72706336 346c6520 70706336 346c6520 rpc64le ppc64le 
│ │ │ │ -  0x002d4a00 474e5520 31352e32 2e30204e 6f6e6520 GNU 15.2.0 None 
│ │ │ │ -  0x002d4a10 464d4920 50726f6a 20475549 20496e74 FMI Proj GUI Int
│ │ │ │ -  0x002d4a20 6c205357 49472045 6967656e 20474441 l SWIG Eigen GDA
│ │ │ │ -  0x002d4a30 4c204646 6d706567 204f5347 20474c32 L FFmpeg OSG GL2
│ │ │ │ -  0x002d4a40 50530000 00000000 204c6963 656e7365 PS...... License
│ │ │ │ +  0x002d49f0 72706336 346c652d 36346b20 70706336 rpc64le-64k ppc6
│ │ │ │ +  0x002d4a00 346c6520 474e5520 31352e32 2e30204e 4le GNU 15.2.0 N
│ │ │ │ +  0x002d4a10 6f6e6520 464d4920 50726f6a 20475549 one FMI Proj GUI
│ │ │ │ +  0x002d4a20 20496e74 6c205357 49472045 6967656e  Intl SWIG Eigen
│ │ │ │ +  0x002d4a30 20474441 4c204646 6d706567 204f5347  GDAL FFmpeg OSG
│ │ │ │ +  0x002d4a40 20474c32 50530000 204c6963 656e7365  GL2PS.. License
│ │ │ │    0x002d4a50 2045504c 2d322e30 3a204563 6c697073  EPL-2.0: Eclips
│ │ │ │    0x002d4a60 65205075 626c6963 204c6963 656e7365 e Public License
│ │ │ │    0x002d4a70 20566572 73696f6e 2032203c 68747470  Version 2 <http
│ │ │ │    0x002d4a80 733a2f2f 65636c69 7073652e 6f72672f s://eclipse.org/
│ │ │ │    0x002d4a90 6c656761 6c2f6570 6c2d7632 302e6874 legal/epl-v20.ht
│ │ │ │    0x002d4aa0 6d6c3e00 00000000 20557365 202d2d68 ml>..... Use --h
│ │ │ │    0x002d4ab0 656c7020 746f2067 65742074 6865206c elp to get the l
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 37373437 34343735 39306230 62336265 7747447590b0b3be
│ │ │ │ -  0x00000010 39373234 32333637 35366536 65623566 9724236756e6eb5f
│ │ │ │ -  0x00000020 33373937 31612e64 65627567 00000000 37971a.debug....
│ │ │ │ -  0x00000030 2a6ebac3                            *n..
│ │ │ │ +  0x00000000 30343432 31353534 65343732 64643766 04421554e472dd7f
│ │ │ │ +  0x00000010 35373732 64623936 33383365 66646531 5772db96383efde1
│ │ │ │ +  0x00000020 36383537 61662e64 65627567 00000000 6857af.debug....
│ │ │ │ +  0x00000030 0772832f                            .r./
│ │ ├── ./usr/bin/marouter
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 773e7024ebd1b55e200aafba869e24316ae23483
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 8ba0db49a23102938ebcc830fa17d68795cab368
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │ -/lib64/ld64.so.2
│ │ │ │ +h/lib64/ld64.so.2
│ │ │ │  %JH}&'GT
│ │ │ │  /93($R U
│ │ │ │  v	AlEy@ h<b
│ │ │ │  _ITM_deregisterTMCloneTable
│ │ │ │  __gmon_start__
│ │ │ │  _ITM_registerTMCloneTable
│ │ │ │  _ZN11xercesc_3_214DefaultHandler13resolveEntityEPKDsS2_
│ │ │ │ @@ -4449,15 +4449,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -514494,15 +514494,15 @@
│ │ │ │  	bl      28520 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1e20>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      29880 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xac0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-9
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,-27328
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      28420 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1f20>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      29540 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xe00>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -5481,20 +5481,20 @@
│ │ │ │    0x003109e0 69612025 2e000000 3c73756d 6f40646c ia %....<sumo@dl
│ │ │ │    0x003109f0 722e6465 3e000000 4f707469 6f6e7320 r.de>...Options 
│ │ │ │    0x00310a00 7365743a 00000000 3a203c49 4e56414c set:....: <INVAL
│ │ │ │    0x00310a10 49443e00 00000000 6c616e67 75616765 ID>.....language
│ │ │ │    0x00310a20 00000000 00000000 20427569 6c642066 ........ Build f
│ │ │ │    0x00310a30 65617475 7265733a 20000000 00000000 eatures: .......
│ │ │ │    0x00310a40 4c696e75 782d362e 31322e35 372b6465 Linux-6.12.57+de
│ │ │ │ -  0x00310a50 6231332d 706f7765 72706336 346c6520 b13-powerpc64le 
│ │ │ │ -  0x00310a60 70706336 346c6520 474e5520 31352e32 ppc64le GNU 15.2
│ │ │ │ -  0x00310a70 2e30204e 6f6e6520 464d4920 50726f6a .0 None FMI Proj
│ │ │ │ -  0x00310a80 20475549 20496e74 6c205357 49472045  GUI Intl SWIG E
│ │ │ │ -  0x00310a90 6967656e 20474441 4c204646 6d706567 igen GDAL FFmpeg
│ │ │ │ -  0x00310aa0 204f5347 20474c32 50530000 00000000  OSG GL2PS......
│ │ │ │ +  0x00310a50 6231332d 706f7765 72706336 346c652d b13-powerpc64le-
│ │ │ │ +  0x00310a60 36346b20 70706336 346c6520 474e5520 64k ppc64le GNU 
│ │ │ │ +  0x00310a70 31352e32 2e30204e 6f6e6520 464d4920 15.2.0 None FMI 
│ │ │ │ +  0x00310a80 50726f6a 20475549 20496e74 6c205357 Proj GUI Intl SW
│ │ │ │ +  0x00310a90 49472045 6967656e 20474441 4c204646 IG Eigen GDAL FF
│ │ │ │ +  0x00310aa0 6d706567 204f5347 20474c32 50530000 mpeg OSG GL2PS..
│ │ │ │    0x00310ab0 204c6963 656e7365 2045504c 2d322e30  License EPL-2.0
│ │ │ │    0x00310ac0 3a204563 6c697073 65205075 626c6963 : Eclipse Public
│ │ │ │    0x00310ad0 204c6963 656e7365 20566572 73696f6e  License Version
│ │ │ │    0x00310ae0 2032203c 68747470 733a2f2f 65636c69  2 <https://ecli
│ │ │ │    0x00310af0 7073652e 6f72672f 6c656761 6c2f6570 pse.org/legal/ep
│ │ │ │    0x00310b00 6c2d7632 302e6874 6d6c3e00 00000000 l-v20.html>.....
│ │ │ │    0x00310b10 20557365 202d2d68 656c7020 746f2067  Use --help to g
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 33653730 32346562 64316235 35653230 3e7024ebd1b55e20
│ │ │ │ -  0x00000010 30616166 62613836 39653234 33313661 0aafba869e24316a
│ │ │ │ -  0x00000020 65323334 38332e64 65627567 00000000 e23483.debug....
│ │ │ │ -  0x00000030 239adf9a                            #...
│ │ │ │ +  0x00000000 61306462 34396132 33313032 39333865 a0db49a23102938e
│ │ │ │ +  0x00000010 62636338 33306661 31376436 38373935 bcc830fa17d68795
│ │ │ │ +  0x00000020 63616233 36382e64 65627567 00000000 cab368.debug....
│ │ │ │ +  0x00000030 d30a2b8c                            ..+.
│ │ ├── ./usr/bin/netconvert
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 5717bc84273270dfa29ff26bf3d2c68b1a50bdf5
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: a2c27ad1129ac49e7868f7c584131f74a4fb0f01
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -5961,15 +5961,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -1048308,15 +1048308,15 @@
│ │ │ │  	bl      36b20 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xfe0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      366e0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1420>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-14
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,-30544
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      373e0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x720>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      36340 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x17c0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -9025,20 +9025,20 @@
│ │ │ │    0x0051f950 69612025 2e000000 3c73756d 6f40646c ia %....<sumo@dl
│ │ │ │    0x0051f960 722e6465 3e000000 4f707469 6f6e7320 r.de>...Options 
│ │ │ │    0x0051f970 7365743a 00000000 3a203c49 4e56414c set:....: <INVAL
│ │ │ │    0x0051f980 49443e00 00000000 6c616e67 75616765 ID>.....language
│ │ │ │    0x0051f990 00000000 00000000 20427569 6c642066 ........ Build f
│ │ │ │    0x0051f9a0 65617475 7265733a 20000000 00000000 eatures: .......
│ │ │ │    0x0051f9b0 4c696e75 782d362e 31322e35 372b6465 Linux-6.12.57+de
│ │ │ │ -  0x0051f9c0 6231332d 706f7765 72706336 346c6520 b13-powerpc64le 
│ │ │ │ -  0x0051f9d0 70706336 346c6520 474e5520 31352e32 ppc64le GNU 15.2
│ │ │ │ -  0x0051f9e0 2e30204e 6f6e6520 464d4920 50726f6a .0 None FMI Proj
│ │ │ │ -  0x0051f9f0 20475549 20496e74 6c205357 49472045  GUI Intl SWIG E
│ │ │ │ -  0x0051fa00 6967656e 20474441 4c204646 6d706567 igen GDAL FFmpeg
│ │ │ │ -  0x0051fa10 204f5347 20474c32 50530000 00000000  OSG GL2PS......
│ │ │ │ +  0x0051f9c0 6231332d 706f7765 72706336 346c652d b13-powerpc64le-
│ │ │ │ +  0x0051f9d0 36346b20 70706336 346c6520 474e5520 64k ppc64le GNU 
│ │ │ │ +  0x0051f9e0 31352e32 2e30204e 6f6e6520 464d4920 15.2.0 None FMI 
│ │ │ │ +  0x0051f9f0 50726f6a 20475549 20496e74 6c205357 Proj GUI Intl SW
│ │ │ │ +  0x0051fa00 49472045 6967656e 20474441 4c204646 IG Eigen GDAL FF
│ │ │ │ +  0x0051fa10 6d706567 204f5347 20474c32 50530000 mpeg OSG GL2PS..
│ │ │ │    0x0051fa20 204c6963 656e7365 2045504c 2d322e30  License EPL-2.0
│ │ │ │    0x0051fa30 3a204563 6c697073 65205075 626c6963 : Eclipse Public
│ │ │ │    0x0051fa40 204c6963 656e7365 20566572 73696f6e  License Version
│ │ │ │    0x0051fa50 2032203c 68747470 733a2f2f 65636c69  2 <https://ecli
│ │ │ │    0x0051fa60 7073652e 6f72672f 6c656761 6c2f6570 pse.org/legal/ep
│ │ │ │    0x0051fa70 6c2d7632 302e6874 6d6c3e00 00000000 l-v20.html>.....
│ │ │ │    0x0051fa80 20557365 202d2d68 656c7020 746f2067  Use --help to g
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 31376263 38343237 33323730 64666132 17bc84273270dfa2
│ │ │ │ -  0x00000010 39666632 36626633 64326336 38623161 9ff26bf3d2c68b1a
│ │ │ │ -  0x00000020 35306264 66352e64 65627567 00000000 50bdf5.debug....
│ │ │ │ -  0x00000030 52f5cbe0                            R...
│ │ │ │ +  0x00000000 63323761 64313132 39616334 39653738 c27ad1129ac49e78
│ │ │ │ +  0x00000010 36386637 63353834 31333166 37346134 68f7c584131f74a4
│ │ │ │ +  0x00000020 66623066 30312e64 65627567 00000000 fb0f01.debug....
│ │ │ │ +  0x00000030 d73c36d2                            .<6.
│ │ ├── ./usr/bin/netedit
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 4659675f90ddc820b68b364f1d4c7cd998db76a5
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 76e939c97322e65ccd61b2b6d86be7d99d02a07f
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -10199,15 +10199,15 @@
│ │ │ │  tools/tls/tls_csv2SUMO.py
│ │ │ │  <configuration><TLS_CSV value="None" type="data_file" help="TLS definition CSV file " category="input" required="true" positional="true"/><NET value="None" type="net_file" help="Network file" category="input" required="true" positional="true"/><debug value="False" type="bool" help="Print additional debug info" category="processing"/></configuration>
│ │ │ │  tools/trigger/csv2vss.py
│ │ │ │  <configuration><outfile value="None" type="string" help="name of output file" category="processing"/><detectorfile value="None" type="string" help="name of detector file" category="processing"/><scale value="60" type="float" help="scaling factor for time" category="processing"/><csvfile value="None" type="string" help="name of input file" category="processing" required="true" positional="true"/></configuration>
│ │ │ │  meandata2vss
│ │ │ │  tools/trigger/meandata2vss.py
│ │ │ │  <configuration><outfile value="None" type="string" help="name of output file" category="processing"/><net-file value="None" type="net_file" help="parse net for edge lengths" category="processing"/><scale value="1.0" type="float" help="scaling factor for speed" category="processing"/><minimum-deviation value="0.0" type="float" help="minimum relative deviation before applying a vss (needs a network)" category="processing"/><attribute value="None" type="string" help="attribute to parse for speed" category="processing"/><meandatafile value="None" type="string" help="name of input file" category="processing" required="true" positional="true"/></configuration>
│ │ │ │ -<!-- generated on 2025-11-16T08:59:03.605609+00:00 by Eclipse SUMO sumo 1.25.0-->
│ │ │ │ +<!-- generated on 2025-11-16T15:42:12.799164+00:00 by Eclipse SUMO sumo 1.25.0-->
│ │ │ │  <?xml version="1.0" encoding="UTF-8"?>
│ │ │ │  <sumoConfiguration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/sumoConfiguration.xsd">
│ │ │ │      <configuration>        <configuration-file value="" synonymes="c configuration" type="FILE" help="Loads the named config on startup"/>        <save-configuration value="" synonymes="C save-config" type="FILE" help="Saves current configuration into FILE"/>        <save-configuration.relative value="false" synonymes="save-config.relative" type="BOOL" help="Enforce relative paths when saving the configuration"/>        <save-template value="" type="FILE" help="Saves a configuration template (empty) into FILE"/>        <save-schema value="" type="FILE" help="Saves the configuration schema into FILE"/>        <save-commented value="false" synonymes="save-template.commented" type="BOOL" help="Adds comments to saved template, configuration, or schema"/>    </configuration>
│ │ │ │      <input>        <net-file value="" synonymes="n net" type="FILE" help="Load road network description from FILE"/>        <route-files value="" synonymes="r routes" type="FILE" help="Load routes descriptions from FILE(s)"/>        <additional-files value="" synonymes="a additional" type="FILE" help="Load further descriptions from FILE(s)"/>        <weight-files value="" synonymes="w weights" type="FILE" help="Load edge/lane weights for online rerouting from FILE"/>        <weight-attribute value="traveltime" synonymes="measure x" deprecated="measure" type="STR" help="Name of the xml attribute which gives the edge weight"/>        <load-state value="" type="FILE" help="Loads a network state from FILE"/>        <load-state.offset value="0" type="TIME" help="Shifts all times loaded from a saved state by the given offset"/>        <load-state.remove-vehicles value="" type="STR[]" help="Removes vehicles with the given IDs from the loaded state"/>        <junction-taz value="false" type="BOOL" help="Initialize a TAZ for every junction to use attributes toJunction and fromJunction"/>    </input>
│ │ │ │      <output>        <write-license value="false" type="BOOL" help="Include license info into every output file"/>        <write-metadata value="false" type="BOOL" help="Write parsable metadata (configuration etc.) instead of comments"/>        <output-prefix value="" type="STR" help="Prefix which is applied to all output files. The special string &apos;TIME&apos; is replaced by the current time."/>        <precision value="2" type="INT" help="Defines the number of digits after the comma for floating point output"/>        <precision.geo value="6" type="INT" help="Defines the number of digits after the comma for lon,lat output"/>        <output.compression value="" type="STR" help="Defines the standard compression algorithm (currently only for parquet output)"/>        <output.format value="xml" type="STR" help="Defines the standard output format if not derivable from the file name (&apos;xml&apos;, &apos;csv&apos;, &apos;parquet&apos;)"/>        <output.column-header value="tag" type="STR" help="How to derive column headers from attribute names (&apos;none&apos;, &apos;tag&apos;, &apos;auto&apos;, &apos;plain&apos;)"/>        <output.column-separator value=";" type="STR" help="Separator in CSV output"/>        <human-readable-time value="false" synonymes="H" type="BOOL" help="Write time values as hour:minute:second or day:hour:minute:second rather than seconds"/>        <netstate-dump value="" synonymes="ndump netstate netstate-output" type="FILE" help="Save complete network states into FILE"/>        <netstate-dump.empty-edges value="false" synonymes="dump-empty-edges netstate-output.empty-edges netstate.empty-edges" deprecated="dump-empty-edges" type="BOOL" help="Write also empty edges completely when dumping"/>        <netstate-dump.precision value="2" synonymes="dump-precision netstate-output.precision netstate.precision" deprecated="dump-precision" type="INT" help="Write positions and speeds with the given precision (default 2)"/>        <emission-output value="" type="FILE" help="Save the emission values of each vehicle"/>        <emission-output.precision value="2" type="INT" help="Write emission values with the given precision (default 2)"/>        <emission-output.geo value="false" type="BOOL" help="Save the positions in emission output using geo-coordinates (lon/lat)"/>        <emission-output.step-scaled value="false" type="BOOL" help="Write emission values scaled to the step length rather than as per-second values"/>        <emission-output.attributes value="" type="STR[]" help="List attributes that should be included in the emission output"/>        <battery-output value="" type="FILE" help="Save the battery values of each vehicle"/>        <battery-output.precision value="2" type="INT" help="Write battery values with the given precision (default 2)"/>        <elechybrid-output value="" type="FILE" help="Save the elecHybrid values of each vehicle"/>        <elechybrid-output.precision value="2" type="INT" help="Write elecHybrid values with the given precision (default 2)"/>        <elechybrid-output.aggregated value="false" type="BOOL" help="Write elecHybrid values into one aggregated file"/>        <chargingstations-output value="" type="FILE" help="Write data of charging stations"/>        <chargingstations-output.aggregated value="false" type="BOOL" help="Write aggregated charging event data instead of single time steps"/>        <chargingstations-output.aggregated.write-unfinished value="false" type="BOOL" help="Write aggregated charging event data for vehicles which have not arrived at simulation end"/>        <overheadwiresegments-output value="" type="FILE" help="Write data of overhead wire segments"/>        <substations-output value="" type="FILE" help="Write data of electrical substation stations"/>        <substations-output.precision value="2" type="INT" help="Write substation values with the given precision (default 2)"/>        <fcd-output value="" type="FILE" help="Save the Floating Car Data"/>        <fcd-output.geo value="false" type="BOOL" help="Save the Floating Car Data using geo-coordinates (lon/lat)"/>        <fcd-output.signals value="false" type="BOOL" help="Add the vehicle signal state to the FCD output (brake lights etc.)"/>        <fcd-output.distance value="false" type="BOOL" help="Add kilometrage to the FCD output (linear referencing)"/>        <fcd-output.acceleration value="false" type="BOOL" help="Add acceleration to the FCD output"/>        <fcd-output.max-leader-distance value="-1" type="FLOAT" help="Add leader vehicle information to the FCD output (within the given distance)"/>        <fcd-output.params value="" type="STR[]" help="Add generic parameter values to the FCD output"/>        <fcd-output.filter-edges.input-file value="" type="FILE" help="Restrict fcd output to the edge selection from the given input file"/>        <fcd-output.attributes value="" type="STR[]" help="List attributes that should be included in the FCD output"/>        <fcd-output.filter-shapes value="" type="STR[]" help="List shape names that should be used to filter the FCD output"/>        <person-fcd-output value="" synonymes="person-fcd" type="FILE" help="Save fcd for persons and container to separate FILE"/>        <device.ssm.filter-edges.input-file value="" type="FILE" help="Restrict SSM device output to the edge selection from the given input file"/>        <full-output value="" type="FILE" help="Save a lot of information for each timestep (very redundant)"/>        <queue-output value="" type="FILE" help="Save the vehicle queues at the junctions (experimental)"/>        <queue-output.period value="-1" type="TIME" help="Save vehicle queues with the given period"/>        <vtk-output value="" type="FILE" help="Save complete vehicle positions inclusive speed values in the VTK Format (usage: /path/out will produce /path/out_$TIMESTEP$.vtp files)"/>        <amitran-output value="" type="FILE" help="Save the vehicle trajectories in the Amitran format"/>        <summary-output value="" synonymes="summary" type="FILE" help="Save aggregated vehicle departure info into FILE"/>        <summary-output.period value="-1" type="TIME" help="Save summary-output with the given period"/>        <person-summary-output value="" type="FILE" help="Save aggregated person counts into FILE"/>        <tripinfo-output value="" synonymes="tripinfo" type="FILE" help="Save single vehicle trip info into FILE"/>        <tripinfo-output.write-unfinished value="false" type="BOOL" help="Write tripinfo output for vehicles which have not arrived at simulation end"/>        <tripinfo-output.write-undeparted value="false" type="BOOL" help="Write tripinfo output for vehicles which have not departed at simulation end because of depart delay"/>        <personinfo-output value="" synonymes="personinfo" type="FILE" help="Save personinfo and containerinfo to separate FILE"/>        <vehroute-output value="" synonymes="vehroutes" type="FILE" help="Save single vehicle route info into FILE"/>        <vehroute-output.exit-times value="false" synonymes="vehroutes.exit-times" type="BOOL" help="Write the exit times for all edges"/>        <vehroute-output.last-route value="false" synonymes="vehroutes.last-route" type="BOOL" help="Write the last route only"/>        <vehroute-output.sorted value="false" synonymes="vehroutes.sorted" type="BOOL" help="Sorts the output by departure time"/>        <vehroute-output.dua value="false" synonymes="vehroutes.dua" type="BOOL" help="Write the output in the duarouter alternatives style"/>        <vehroute-output.cost value="false" type="BOOL" help="Write costs for all routes"/>        <vehroute-output.intended-depart value="false" synonymes="vehroutes.intended-depart" type="BOOL" help="Write the output with the intended instead of the real departure time"/>        <vehroute-output.route-length value="false" synonymes="vehroutes.route-length" type="BOOL" help="Include total route length in the output"/>        <vehroute-output.write-unfinished value="false" type="BOOL" help="Write vehroute output for vehicles which have not arrived at simulation end"/>        <vehroute-output.skip-ptlines value="false" type="BOOL" help="Skip vehroute output for public transport vehicles"/>        <vehroute-output.incomplete value="false" type="BOOL" help="Include invalid routes and route stubs in vehroute output"/>        <vehroute-output.stop-edges value="false" type="BOOL" help="Include information about edges between stops"/>        <vehroute-output.speedfactor value="false" type="BOOL" help="Write the vehicle speedFactor (defaults to &apos;true&apos; if departSpeed is written)"/>        <vehroute-output.internal value="false" type="BOOL" help="Include internal edges in the output"/>        <personroute-output value="" synonymes="personroutes" type="FILE" help="Save person and container routes to separate FILE"/>        <link-output value="" type="FILE" help="Save links states into FILE"/>        <railsignal-block-output value="" type="FILE" help="Save railsignal-blocks into FILE"/>        <railsignal-vehicle-output value="" type="FILE" help="Record entry and exit times of vehicles for railsignal blocks into FILE"/>        <bt-output value="" type="FILE" help="Save bluetooth visibilities into FILE (in conjunction with device.btreceiver and device.btsender)"/>        <lanechange-output value="" type="FILE" help="Record lane changes and their motivations for all vehicles into FILE"/>        <lanechange-output.started value="false" type="BOOL" help="Record start of lane change manoeuvres"/>        <lanechange-output.ended value="false" type="BOOL" help="Record end of lane change manoeuvres"/>        <lanechange-output.xy value="false" type="BOOL" help="Record coordinates of lane change manoeuvres"/>        <stop-output value="" type="FILE" help="Record stops and loading/unloading of passenger and containers for all vehicles into FILE"/>        <stop-output.write-unfinished value="false" type="BOOL" help="Write stop output for stops which have not ended at simulation end"/>        <collision-output value="" type="FILE" help="Write collision information into FILE"/>        <edgedata-output value="" type="FILE" help="Write aggregated traffic statistics for all edges into FILE"/>        <lanedata-output value="" type="FILE" help="Write aggregated traffic statistics for all lanes into FILE"/>        <statistic-output value="" synonymes="statistics-output" type="FILE" help="Write overall statistics into FILE"/>        <deadlock-output value="" type="FILE" help="Write reports on deadlocks FILE"/>        <save-state.times value="" type="STR[]" help="Use TIME[] as times at which a network state written"/>        <save-state.period value="-1" type="TIME" help="save state repeatedly after TIME period"/>        <save-state.period.keep value="0" type="INT" help="Keep only the last INT periodic state files"/>        <save-state.prefix value="state" type="FILE" help="Prefix for network states"/>        <save-state.suffix value=".xml.gz" type="STR" help="Suffix for network states (.xml.gz or .xml)"/>        <save-state.files value="" type="FILE" help="Files for network states"/>        <save-state.rng value="false" type="BOOL" help="Save random number generator states"/>        <save-state.transportables value="false" type="BOOL" help="Save person and container states (experimental)"/>        <save-state.constraints value="false" type="BOOL" help="Save rail signal constraints"/>        <save-state.precision value="2" type="INT" help="Write internal state values with the given precision (default 2)"/>    </output>
│ │ │ │      <time>        <begin value="0" synonymes="b" type="TIME" help="Defines the begin time in seconds; The simulation starts at this time"/>        <end value="-1" synonymes="e" type="TIME" help="Defines the end time in seconds; The simulation ends at this time"/>        <step-length value="1" type="TIME" help="Defines the step duration in seconds"/>    </time>
│ │ │ │      <processing>        <step-method.ballistic value="false" type="BOOL" help="Whether to use ballistic method for the positional update of vehicles (default is a semi-implicit Euler method)."/>        <extrapolate-departpos value="false" type="BOOL" help="Whether vehicles that depart between simulation steps should extrapolate the depart position"/>        <threads value="1" type="INT" help="Defines the number of threads for parallel simulation"/>        <lateral-resolution value="-1" type="FLOAT" help="Defines the resolution in m when handling lateral positioning within a lane (with -1 all vehicles drive at the center of their lane"/>        <route-steps value="200" synonymes="s" type="TIME" help="Load routes for the next number of seconds ahead"/>        <no-internal-links value="false" type="BOOL" help="Disable (junction) internal links"/>        <ignore-junction-blocker value="-1" type="TIME" help="Ignore vehicles which block the junction after they have been standing for SECONDS (-1 means never ignore)"/>        <ignore-route-errors value="false" type="BOOL" help="Do not check whether routes are connected"/>        <ignore-accidents value="false" type="BOOL" help="Do not check whether accidents occur"/>        <collision.action value="teleport" type="STR" help="How to deal with collisions: [none,warn,teleport,remove]"/>        <intermodal-collision.action value="warn" type="STR" help="How to deal with collisions between vehicle and pedestrian: [none,warn,teleport,remove]"/>        <collision.stoptime value="0" type="TIME" help="Let vehicle stop for TIME before performing collision.action (except for action &apos;none&apos;)"/>        <intermodal-collision.stoptime value="0" type="TIME" help="Let vehicle stop for TIME before performing intermodal-collision.action (except for action &apos;none&apos;)"/>        <collision.check-junctions value="false" type="BOOL" help="Enables collisions checks on junctions"/>        <collision.check-junctions.mingap value="0" type="FLOAT" help="Increase or decrease sensitivity for junction collision check"/>        <collision.mingap-factor value="-1" type="FLOAT" help="Sets the fraction of minGap that must be maintained to avoid collision detection. If a negative value is given, the carFollowModel parameter is used"/>        <keep-after-arrival value="0" type="TIME" help="After a vehicle arrives, keep it in memory for the given TIME (for TraCI access)"/>        <max-num-vehicles value="-1" type="INT" help="Delay vehicle insertion to stay within the given maximum number"/>        <max-num-persons value="-1" type="INT" help="Delay person insertion to stay within the given maximum number"/>        <max-num-teleports value="-1" type="INT" help="Abort the simulation if the given maximum number of teleports is exceeded"/>        <scale value="1" type="FLOAT" help="Scale demand by the given factor (by discarding or duplicating vehicles)"/>        <scale-suffix value="." type="STR" help="Suffix to be added when creating ids for cloned vehicles"/>        <time-to-teleport value="300" type="TIME" help="Specify how long a vehicle may wait until being teleported, defaults to 300, non-positive values disable teleporting"/>        <time-to-teleport.highways value="0" type="TIME" help="The waiting time after which vehicles on a fast road (speed &gt; 69km/h) are teleported if they are on a non-continuing lane"/>        <time-to-teleport.highways.min-speed value="19.1667" type="FLOAT" help="The waiting time after which vehicles on a fast road (default: speed &gt; 69km/h) are teleported if they are on a non-continuing lane"/>        <time-to-teleport.disconnected value="-1" type="TIME" help="The waiting time after which vehicles with a disconnected route are teleported. Negative values disable teleporting"/>        <time-to-teleport.remove value="false" type="BOOL" help="Whether vehicles shall be removed after waiting too long instead of being teleported"/>        <time-to-teleport.remove-constraint value="false" type="BOOL" help="Whether rail-signal-constraint based deadlocks shall be cleared by removing a constraint"/>        <time-to-teleport.ride value="-1" type="TIME" help="The waiting time after which persons / containers waiting for a pickup are teleported. Negative values disable teleporting"/>        <time-to-teleport.bidi value="-1" type="TIME" help="The waiting time after which vehicles on bidirectional edges are teleported"/>        <time-to-teleport.railsignal-deadlock value="-1" type="TIME" help="The waiting time after which vehicles in a rail-signal based deadlock are teleported"/>        <waiting-time-memory value="100" type="TIME" help="Length of time interval, over which accumulated waiting time is taken into account (default is 100s.)"/>        <startup-wait-threshold value="2" type="TIME" help="Minimum consecutive waiting time before applying startupDelay"/>        <max-depart-delay value="-1" type="TIME" help="How long vehicles wait for departure before being skipped, defaults to -1 which means vehicles are never skipped"/>        <sloppy-insert value="false" type="BOOL" help="Whether insertion on an edge shall not be repeated in same step once failed"/>        <eager-insert value="false" type="BOOL" help="Whether each vehicle is checked separately for insertion on an edge"/>        <emergency-insert value="false" type="BOOL" help="Allow inserting a vehicle in a situation which requires emergency braking"/>        <insertion-checks value="all" type="STR" help="Override default value for vehicle attribute insertionChecks"/>        <random-depart-offset value="0" type="TIME" help="Each vehicle receives a random offset to its depart value drawn uniformly from [0, TIME]"/>        <lanechange.duration value="0" type="TIME" help="Duration of a lane change maneuver (default 0)"/>        <lanechange.overtake-right value="false" type="BOOL" help="Whether overtaking on the right on motorways is permitted"/>        <tls.all-off value="false" type="BOOL" help="Switches off all traffic lights."/>        <tls.actuated.show-detectors value="false" type="BOOL" help="Sets default visibility for actuation detectors"/>        <tls.actuated.jam-threshold value="-1" type="FLOAT" help="Sets default jam-threshold parameter for all actuation detectors"/>        <tls.actuated.detector-length value="0" type="FLOAT" help="Sets default detector length parameter for all actuation detectors"/>        <tls.delay_based.detector-range value="100" type="FLOAT" help="Sets default range for detecting delayed vehicles"/>        <tls.yellow.min-decel value="3" type="FLOAT" help="Minimum deceleration when braking at yellow"/>        <railsignal-moving-block value="false" type="BOOL" help="Let railsignals operate in moving-block mode by default"/>        <railsignal.max-block-length value="20000" type="FLOAT" help="Do not build blocks longer than FLOAT and issue a warning instead"/>        <railsignal.default-classes value="rail,rail_fast,rail_electric,rail_urban" type="STR[]" help="List vehicle classes that uses block-based insertion checks even when the network has no rail signals for them"/>        <time-to-impatience value="180" type="TIME" help="Specify how long a vehicle may wait until impatience grows from 0 to 1, defaults to 300, non-positive values disable impatience growth"/>        <default.departspeed value="0" type="STR" help="Select default depart speed"/>        <default.departlane value="first" type="STR" help="Select default depart lane"/>        <default.action-step-length value="0" type="FLOAT" help="Length of the default interval length between action points for the car-following and lane-change models (in seconds). If not specified, the simulation step-length is used per default. Vehicle- or VType-specific settings override the default. Must be a multiple of the simulation step-length."/>        <default.carfollowmodel value="Krauss" synonymes="carfollow.model" type="STR" help="Select default car following model (Krauss, IDM, ...)"/>        <default.speeddev value="-1" type="FLOAT" help="Select default speed deviation. A negative value implies vClass specific defaults (0.1 for the default passenger class)"/>        <default.emergencydecel value="default" type="STR" help="Select default emergencyDecel value among (&apos;decel&apos;, &apos;default&apos;, FLOAT) which sets the value either to the same as the deceleration value, a vClass-class specific default or the given FLOAT in m/s^2"/>        <overhead-wire.solver value="true" type="BOOL" help="Use Kirchhoff&apos;s laws for solving overhead wire circuit"/>        <overhead-wire.recuperation value="true" type="BOOL" help="Enable recuperation from the vehicle equipped with elecHybrid device into the overhead wire."/>        <overhead-wire.substation-current-limits value="true" type="BOOL" help="Enable current limits of traction substation during solving the overhead wire electrical circuit."/>        <emergencydecel.warning-threshold value="1" type="FLOAT" help="Sets the fraction of emergency decel capability that must be used to trigger a warning."/>        <parking.maneuver value="false" type="BOOL" help="Whether parking simulation includes maneuvering time and associated lane blocking"/>        <use-stop-ended value="false" type="BOOL" help="Override stop until times with stop ended times when given"/>        <use-stop-started value="false" type="BOOL" help="Override stop arrival times with stop started times when given"/>        <pedestrian.model value="striping" type="STR" help="Select among pedestrian models [&apos;nonInteracting&apos;, &apos;striping&apos;, &apos;jupedsim&apos;, &apos;remote&apos;]"/>        <pedestrian.timegap-crossing value="2" type="FLOAT" help="Minimal acceptable gap (in seconds) between two vehicles before starting to cross"/>        <pedestrian.striping.stripe-width value="0.64" type="FLOAT" help="Width of parallel stripes for segmenting a sidewalk (meters) for use with model &apos;striping&apos;"/>        <pedestrian.striping.dawdling value="0.2" type="FLOAT" help="Factor for random slow-downs [0,1] for use with model &apos;striping&apos;"/>        <pedestrian.striping.mingap-to-vehicle value="0.25" type="FLOAT" help="Minimal gap / safety buffer (in meters) from a pedestrian to another vehicle for use with model &apos;striping&apos;"/>        <pedestrian.striping.jamtime value="300" type="TIME" help="Time in seconds after which pedestrians start squeezing through a jam when using model &apos;striping&apos; (non-positive values disable squeezing)"/>        <pedestrian.striping.jamtime.crossing value="10" type="TIME" help="Time in seconds after which pedestrians start squeezing through a jam while on a pedestrian crossing when using model &apos;striping&apos; (non-positive values disable squeezing)"/>        <pedestrian.striping.jamtime.narrow value="1" type="TIME" help="Time in seconds after which pedestrians start squeezing through a jam while on a narrow lane when using model &apos;striping&apos;"/>        <pedestrian.striping.jamfactor value="0.25" type="FLOAT" help="Factor for reducing speed of pedestrian in jammed state"/>        <pedestrian.striping.reserve-oncoming value="0" type="FLOAT" help="Fraction of stripes to reserve for oncoming pedestrians"/>        <pedestrian.striping.reserve-oncoming.junctions value="0.34" type="FLOAT" help="Fraction of stripes to reserve for oncoming pedestrians on crossings and walkingareas"/>        <pedestrian.striping.reserve-oncoming.max value="1.28" type="FLOAT" help="Maximum width in m to reserve for oncoming pedestrians"/>        <pedestrian.striping.legacy-departposlat value="false" type="BOOL" help="Interpret departPosLat for walks in legacy style"/>        <pedestrian.striping.walkingarea-detail value="4" type="INT" help="Generate INT intermediate points to smooth out lanes within the walkingarea"/>        <ride.stop-tolerance value="10" type="FLOAT" help="Tolerance to apply when matching pedestrian and vehicle positions on boarding at individual stops"/>        <mapmatch.distance value="100" type="FLOAT" help="Maximum distance when mapping input coordinates (fromXY etc.) to the road network"/>        <mapmatch.junctions value="false" type="BOOL" help="Match positions to junctions instead of edges"/>        <mapmatch.taz value="false" type="BOOL" help="Match positions to taz instead of edges"/>        <weights.turnaround-penalty value="5" type="FLOAT" help="Apply the given time penalty when computing routing costs for turnaround internal lanes"/>        <weights.reversal-penalty value="60" type="FLOAT" help="Apply the given time penalty when computing routing costs for train reversal. Negative values disable reversal"/>        <persontrip.walk-opposite-factor value="1" type="FLOAT" help="Use FLOAT as a factor on walking speed against vehicle traffic direction"/>    </processing>
│ │ │ │ @@ -10230,15 +10230,15 @@
│ │ │ │      <friction_device>        <device.friction.probability value="-1" type="FLOAT" help="The probability for a vehicle to have a &apos;friction&apos; device"/>        <device.friction.explicit value="" synonymes="device.friction.knownveh" deprecated="device.friction.knownveh" type="STR[]" help="Assign a &apos;friction&apos; device to named vehicles"/>        <device.friction.deterministic value="false" type="BOOL" help="The &apos;friction&apos; devices are set deterministic using a fraction of 1000"/>        <device.friction.stdDev value="0.1" type="FLOAT" help="The measurement noise parameter which can be applied to the friction device"/>        <device.friction.offset value="0" type="FLOAT" help="The measurement offset parameter which can be applied to the friction device -&gt; e.g. to force false measurements"/>    </friction_device>
│ │ │ │      <fcd_replay_device>        <device.fcd-replay.probability value="-1" type="FLOAT" help="The probability for a vehicle to have a &apos;fcd-replay&apos; device"/>        <device.fcd-replay.explicit value="" synonymes="device.fcd-replay.knownveh" deprecated="device.fcd-replay.knownveh" type="STR[]" help="Assign a &apos;fcd-replay&apos; device to named vehicles"/>        <device.fcd-replay.deterministic value="false" type="BOOL" help="The &apos;fcd-replay&apos; devices are set deterministic using a fraction of 1000"/>        <device.fcd-replay.file value="" type="FILE" help="FCD file to read"/>    </fcd_replay_device>
│ │ │ │      <traci_server>        <remote-port value="0" type="INT" help="Enables TraCI Server if set"/>        <num-clients value="1" type="INT" help="Expected number of connecting clients"/>    </traci_server>
│ │ │ │      <mesoscopic>        <mesosim value="false" type="BOOL" help="Enables mesoscopic simulation"/>        <meso-edgelength value="98" type="FLOAT" help="Length of an edge segment in mesoscopic simulation"/>        <meso-tauff value="1.13" type="TIME" help="Factor for calculating the net free-free headway time"/>        <meso-taufj value="1.13" type="TIME" help="Factor for calculating the net free-jam headway time"/>        <meso-taujf value="1.73" type="TIME" help="Factor for calculating the jam-free headway time"/>        <meso-taujj value="1.4" type="TIME" help="Factor for calculating the jam-jam headway time"/>        <meso-jam-threshold value="-1" type="FLOAT" help="Minimum percentage of occupied space to consider a segment jammed. A negative argument causes thresholds to be computed based on edge speed and tauff (default)"/>        <meso-multi-queue value="true" type="BOOL" help="Enable multiple queues at edge ends"/>        <meso-lane-queue value="false" type="BOOL" help="Enable separate queues for every lane"/>        <meso-ignore-lanes-by-vclass value="pedestrian,bicycle" synonymes="meso.ignore-lanes.by-vclass" type="STR[]" help="Do not build queues (or reduce capacity) for lanes allowing only the given vclasses"/>        <meso-junction-control value="false" type="BOOL" help="Enable mesoscopic traffic light and priority junction handling"/>        <meso-junction-control.limited value="false" type="BOOL" help="Enable mesoscopic traffic light and priority junction handling for saturated links. This prevents faulty traffic lights from hindering flow in low-traffic situations"/>        <meso-tls-penalty value="0" type="FLOAT" help="Apply scaled travel time penalties when driving across tls controlled junctions based on green split instead of checking actual phases"/>        <meso-tls-flow-penalty value="0" type="FLOAT" help="Apply scaled headway penalties when driving across tls controlled junctions based on green split instead of checking actual phases"/>        <meso-minor-penalty value="0" type="TIME" help="Apply fixed time penalty when driving across a minor link. When using --meso-junction-control.limited, the penalty is not applied whenever limited control is active."/>        <meso-overtaking value="false" type="BOOL" help="Enable mesoscopic overtaking"/>        <meso-recheck value="0" type="TIME" help="Time interval for rechecking insertion into the next segment after failure"/>    </mesoscopic>
│ │ │ │      <random_number>        <random value="false" synonymes="abs-rand" deprecated="abs-rand" type="BOOL" help="Initialises the random number generator with the current system time"/>        <seed value="23423" synonymes="srand" deprecated="srand" type="INT" help="Initialises the random number generator with the given value"/>        <thread-rngs value="64" type="INT" help="Number of pre-allocated random number generators to ensure repeatable multi-threaded simulations (should be at least the number of threads for repeatable simulations)."/>    </random_number>
│ │ │ │      <gui_only>        <gui-settings-file value="" synonymes="g" type="FILE" help="Load visualisation settings from FILE"/>        <quit-on-end value="false" synonymes="Q" type="BOOL" help="Quits the GUI when the simulation stops"/>        <game value="false" synonymes="G" type="BOOL" help="Start the GUI in gaming mode"/>        <game.mode value="tls" type="STR" help="Select the game type (&apos;tls&apos;, &apos;drt&apos;)"/>        <start value="false" synonymes="S" type="BOOL" help="Start the simulation after loading"/>        <delay value="0" synonymes="d" type="FLOAT" help="Use FLOAT in ms as delay between simulation steps"/>        <breakpoints value="" synonymes="B" type="STR[]" help="Use TIME[] as times when the simulation should halt"/>        <edgedata-files value="" synonymes="data-files" type="FILE" help="Load edge/lane weights for visualization from FILE"/>        <alternative-net-file value="" synonymes="N" type="FILE" help="Load a secondary road network for abstract visualization from FILE"/>        <selection-file value="" type="FILE" help="Load pre-selected elements from FILE"/>        <demo value="false" synonymes="D" type="BOOL" help="Restart the simulation after ending (demo mode)"/>        <disable-textures value="false" synonymes="T" type="BOOL" help="Do not load background pictures"/>        <registry-viewport value="false" type="BOOL" help="Load current viewport from registry"/>        <window-size value="" type="STR[]" help="Create initial window with the given x,y size"/>        <window-pos value="" type="STR[]" help="Create initial window at the given x,y position"/>        <tracker-interval value="1" type="TIME" help="The aggregation period for value tracker windows"/>        <osg-view value="false" type="BOOL" help="Start with an OpenSceneGraph view instead of the regular 2D view"/>        <gui-testing value="false" type="BOOL" help="Enable overlay for screen recognition"/>        <gui-testing-debug value="false" type="BOOL" help="Enable output messages during GUI-Testing"/>        <gui-testing.setting-output value="" type="FILE" help="Save gui settings in the given settings output file"/>    </gui_only>
│ │ │ │  </sumoConfiguration>
│ │ │ │ -<!-- generated on 2025-11-16T08:59:03.759061+00:00 by Eclipse SUMO netgenerate 1.25.0-->
│ │ │ │ +<!-- generated on 2025-11-16T15:42:12.957586+00:00 by Eclipse SUMO netgenerate 1.25.0-->
│ │ │ │  <netgenerateConfiguration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/netgenerateConfiguration.xsd">
│ │ │ │      <grid_network>        <grid value="false" synonymes="g grid-net" deprecated="grid-net" type="BOOL" help="Forces NETGEN to build a grid-like network"/>        <grid.number value="5" synonymes="grid-number number" deprecated="grid-number" type="INT" help="The number of junctions in both dirs"/>        <grid.length value="100" synonymes="grid-length length" deprecated="grid-length" type="FLOAT" help="The length of streets in both dirs"/>        <grid.x-number value="5" synonymes="grid-x-number x-no" deprecated="grid-x-number" type="INT" help="The number of junctions in x-dir; Overrides --grid-number"/>        <grid.y-number value="5" synonymes="grid-y-number y-no" deprecated="grid-y-number" type="INT" help="The number of junctions in y-dir; Overrides --grid-number"/>        <grid.x-length value="100" synonymes="grid-x-length x-length" deprecated="grid-x-length" type="FLOAT" help="The length of horizontal streets; Overrides --grid-length"/>        <grid.y-length value="100" synonymes="grid-y-length y-length" deprecated="grid-y-length" type="FLOAT" help="The length of vertical streets; Overrides --grid-length"/>        <grid.attach-length value="0" synonymes="attach-length" deprecated="attach-length" type="FLOAT" help="The length of streets attached at the boundary; 0 means no streets are attached"/>        <grid.x-attach-length value="0" type="FLOAT" help="The length of streets attached at the boundary in x direction; 0 means no streets are attached"/>        <grid.y-attach-length value="0" type="FLOAT" help="The length of streets attached at the boundary in y direction; 0 means no streets are attached"/>    </grid_network>
│ │ │ │      <spider_network>        <spider value="false" synonymes="s spider-net" deprecated="spider-net" type="BOOL" help="Forces NETGEN to build a spider-net-like network"/>        <spider.arm-number value="7" synonymes="arms spider-arm-number" deprecated="spider-arm-number" type="INT" help="The number of axes within the net"/>        <spider.circle-number value="5" synonymes="circles spider-circle-number" deprecated="spider-circle-number" type="INT" help="The number of circles of the net"/>        <spider.space-radius value="100" synonymes="radius spider-space-rad" deprecated="spider-space-rad" type="FLOAT" help="The distances between the circles"/>        <spider.omit-center value="false" synonymes="nocenter spider-omit-center" deprecated="spider-omit-center" type="BOOL" help="Omit the central node of the network"/>        <spider.attach-length value="0" type="FLOAT" help="The length of streets attached at the boundary; 0 means no streets are attached"/>    </spider_network>
│ │ │ │      <random_network>        <rand value="false" synonymes="r random-net" deprecated="random-net" type="BOOL" help="Forces NETGEN to build a random network"/>        <rand.iterations value="100" synonymes="iterations rand-iterations" deprecated="rand-iterations" type="INT" help="Describes how many times an edge shall be added to the net"/>        <rand.max-distance value="250" synonymes="max-dist rand-max-distance" deprecated="rand-max-distance" type="FLOAT" help="The maximum distance for each edge"/>        <rand.min-distance value="100" synonymes="min-dist rand-min-distance" deprecated="rand-min-distance" type="FLOAT" help="The minimum distance for each edge"/>        <rand.min-angle value="45" synonymes="min-angle rand-min-anglee" deprecated="rand-min-anglee" type="FLOAT" help="The minimum angle for each pair of (bidirectional) roads in DEGREES"/>        <rand.num-tries value="50" synonymes="num-tries rand-num-tries" deprecated="rand-num-tries" type="INT" help="The number of tries for creating each node"/>        <rand.connectivity value="0.95" synonymes="connectivity rand-connectivity" deprecated="rand-connectivity" type="FLOAT" help="Probability for roads to continue at each node"/>        <rand.neighbor-dist1 value="0" synonymes="dist1 rand-neighbor-dist1" deprecated="rand-neighbor-dist1" type="FLOAT" help="Probability for a node having at most 1 neighbor"/>        <rand.neighbor-dist2 value="0" synonymes="dist2 rand-neighbor-dist2" deprecated="rand-neighbor-dist2" type="FLOAT" help="Probability for a node having at most 2 neighbors"/>        <rand.neighbor-dist3 value="10" synonymes="dist3 rand-neighbor-dist3" deprecated="rand-neighbor-dist3" type="FLOAT" help="Probability for a node having at most 3 neighbors"/>        <rand.neighbor-dist4 value="10" synonymes="dist4 rand-neighbor-dist4" deprecated="rand-neighbor-dist4" type="FLOAT" help="Probability for a node having at most 4 neighbors"/>        <rand.neighbor-dist5 value="2" synonymes="dist5 rand-neighbor-dist5" deprecated="rand-neighbor-dist5" type="FLOAT" help="Probability for a node having at most 5 neighbors"/>        <rand.neighbor-dist6 value="1" synonymes="dist6 rand-neighbor-dist6" deprecated="rand-neighbor-dist6" type="FLOAT" help="Probability for a node having at most 6 neighbors"/>        <rand.grid value="false" type="BOOL" help="Place nodes on a regular grid with spacing rand.min-distance"/>    </random_network>
│ │ │ │      <input>        <type-files value="" synonymes="t" type="FILE" help="Read edge-type defs from FILE"/>    </input>
│ │ │ │      <output>        <write-license value="false" type="BOOL" help="Include license info into every output file"/>        <write-metadata value="false" type="BOOL" help="Write parsable metadata (configuration etc.) instead of comments"/>        <output-prefix value="" type="STR" help="Prefix which is applied to all output files. The special string &apos;TIME&apos; is replaced by the current time."/>        <precision value="2" type="INT" help="Defines the number of digits after the comma for floating point output"/>        <precision.geo value="6" type="INT" help="Defines the number of digits after the comma for lon,lat output"/>        <output.compression value="" type="STR" help="Defines the standard compression algorithm (currently only for parquet output)"/>        <output.format value="xml" type="STR" help="Defines the standard output format if not derivable from the file name (&apos;xml&apos;, &apos;csv&apos;, &apos;parquet&apos;)"/>        <output.column-header value="tag" type="STR" help="How to derive column headers from attribute names (&apos;none&apos;, &apos;tag&apos;, &apos;auto&apos;, &apos;plain&apos;)"/>        <output.column-separator value=";" type="STR" help="Separator in CSV output"/>        <human-readable-time value="false" synonymes="H" type="BOOL" help="Write time values as hour:minute:second or day:hour:minute:second rather than seconds"/>        <alphanumerical-ids value="true" type="BOOL" help="The Ids of generated nodes use an alphanumerical code for easier readability when possible"/>        <output-file value="" synonymes="o output sumo-output" type="FILE" help="The generated net will be written to FILE"/>        <plain-output-prefix value="" synonymes="p plain plain-output" type="FILE" help="Prefix of files to write plain xml nodes, edges and connections to"/>        <plain-output.lanes value="false" type="BOOL" help="Write all lanes and their attributes even when they are not customized"/>        <junctions.join-output value="" type="FILE" help="Writes information about joined junctions to FILE (can be loaded as additional node-file to reproduce joins"/>        <prefix value="" type="STR" help="Defines a prefix for edge and junction IDs"/>        <prefix.junction value="" type="STR" help="Defines a prefix for junction IDs"/>        <prefix.edge value="" type="STR" help="Defines a prefix for edge IDs"/>        <amitran-output value="" type="FILE" help="The generated net will be written to FILE using Amitran format"/>        <matsim-output value="" type="FILE" help="The generated net will be written to FILE using MATSim format"/>        <opendrive-output value="" type="FILE" help="The generated net will be written to FILE using OpenDRIVE format"/>        <dlr-navteq-output value="" type="FILE" help="The generated net will be written to dlr-navteq files with the given PREFIX"/>        <dlr-navteq.version value="6.5" type="STR" help="The dlr-navteq output format version to write"/>        <dlr-navteq.precision value="2" type="INT" help="The network coordinates are written with the specified level of output precision"/>        <output.street-names value="false" type="BOOL" help="Street names will be included in the output (if available)"/>        <output.original-names value="false" type="BOOL" help="Writes original names, if given, as parameter"/>        <output.removed-nodes value="false" type="BOOL" help="Writes IDs of nodes remove with --geometry.remove into edge param"/>        <street-sign-output value="" type="FILE" help="Writes street signs as POIs to FILE"/>        <opendrive-output.straight-threshold value="1e-08" type="FLOAT" help="Builds parameterized curves whenever the angular change between straight segments exceeds FLOAT degrees"/>    </output>
│ │ │ │      <processing>        <turn-lanes value="0" type="INT" help="Generate INT left-turn lanes"/>        <turn-lanes.length value="20" type="FLOAT" help="Set the length of generated turning lanes to FLOAT"/>        <perturb-x value="0" type="STR" help="Apply random spatial perturbation in x direction according to the given distribution"/>        <perturb-y value="0" type="STR" help="Apply random spatial perturbation in y direction according to the given distribution"/>        <perturb-z value="0" type="STR" help="Apply random spatial perturbation in z direction according to the given distribution"/>        <bidi-probability value="1" synonymes="bidi rand-bidi-probability rand.bidi-probability" deprecated="rand-bidi-probability" type="FLOAT" help="Defines the probability to build a reverse edge"/>        <random-lanenumber value="false" synonymes="rand.random-lanenumber" type="BOOL" help="Draw lane numbers randomly from [1,default.lanenumber]"/>        <random-priority value="false" synonymes="rand.random-priority" type="BOOL" help="Draw edge priority randomly from [1,default.priority]"/>        <random-type value="false" type="BOOL" help="Draw edge type randomly from all loaded types"/>        <numerical-ids value="false" type="BOOL" help="Remaps alphanumerical IDs of nodes and edges to ensure that all IDs are integers"/>        <numerical-ids.node-start value="2147483647" type="INT" help="Remaps IDs of nodes to integers starting at INT"/>        <numerical-ids.edge-start value="2147483647" type="INT" help="Remaps IDs of edges to integers starting at INT"/>        <reserved-ids value="" type="FILE" help="Ensures that generated ids do not included any of the typed IDs from FILE (sumo-gui selection file format)"/>        <kept-ids value="" type="FILE" help="Ensures that objects with typed IDs from FILE (sumo-gui selection file format) are not renamed"/>        <geometry.split value="false" synonymes="split-geometry" deprecated="split-geometry" type="BOOL" help="Splits edges across geometry nodes"/>        <geometry.remove value="false" synonymes="R remove-geometry" deprecated="remove-geometry" type="BOOL" help="Replace nodes which only define edge geometry by geometry points (joins edges)"/>        <geometry.remove.keep-edges.explicit value="" type="STR[]" help="Ensure that the given list of edges is not modified"/>        <geometry.remove.keep-edges.input-file value="" type="FILE" help="Ensure that the edges in FILE are not modified (Each id on a single line. Selection files from sumo-gui are also supported)"/>        <geometry.remove.min-length value="0" type="FLOAT" help="Allow merging edges with differing attributes when their length is below min-length"/>        <geometry.remove.width-tolerance value="0" type="FLOAT" help="Allow merging edges with differing lane widths if the difference is below FLOAT"/>        <geometry.remove.max-junction-size value="-1" type="FLOAT" help="Prevent removal of junctions with a size above FLOAT as defined by custom edge endpoints"/>        <geometry.max-segment-length value="0" type="FLOAT" help="splits geometry to restrict segment length"/>        <geometry.max-grade value="10" type="FLOAT" help="Warn about edge geometries with a grade in % above FLOAT."/>        <geometry.max-grade.fix value="true" type="BOOL" help="Smooth edge geometries with a grade above the warning threshold."/>        <offset.disable-normalization value="false" synonymes="disable-normalize-node-positions" deprecated="disable-normalize-node-positions" type="BOOL" help="Turn off normalizing node positions"/>        <offset.x value="0" synonymes="x-offset-to-apply" deprecated="x-offset-to-apply" type="FLOAT" help="Adds FLOAT to net x-positions"/>        <offset.y value="0" synonymes="y-offset-to-apply" deprecated="y-offset-to-apply" type="FLOAT" help="Adds FLOAT to net y-positions"/>        <offset.z value="0" type="FLOAT" help="Adds FLOAT to net z-positions"/>        <flip-y-axis value="false" synonymes="flip-y" type="BOOL" help="Flips the y-coordinate along zero"/>        <roundabouts.guess value="true" synonymes="guess-roundabouts" deprecated="guess-roundabouts" type="BOOL" help="Enable roundabout-guessing"/>        <roundabouts.guess.max-length value="3500" type="FLOAT" help="Structures with a circumference above FLOAT threshold are not classified as roundabout"/>        <roundabouts.visibility-distance value="9" type="FLOAT" help="Default visibility when approaching a roundabout"/>        <opposites.guess value="false" type="BOOL" help="Enable guessing of opposite direction lanes usable for overtaking"/>        <opposites.guess.fix-lengths value="true" type="BOOL" help="Ensure that opposite edges have the same length"/>        <fringe.guess value="false" type="BOOL" help="Enable guessing of network fringe nodes"/>        <fringe.guess.speed-threshold value="13.8889" type="FLOAT" help="Guess disconnected edges above the given speed as outer fringe"/>        <lefthand value="false" type="BOOL" help="Assumes left-hand traffic on the network"/>        <edges.join value="false" type="BOOL" help="Merges edges which connect the same nodes and are close to each other (recommended for VISSIM import)"/>    </processing>
│ │ │ │ @@ -33416,15 +33416,15 @@
│ │ │ │  Saved % configuration.
│ │ │ │  Loaded % configuration.
│ │ │ │  Invalid Junction
│ │ │ │  Invalid number of TLSs
│ │ │ │  About Eclipse SUMO netedit
│ │ │ │  Network editor for Eclipse SUMO, the Simulation of Urban MObility
│ │ │ │  Graphical editor for road networks and infrastructure.
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │  SUMO_HOME: 
│ │ │ │  Copyright (C) 2001-2025 German Aerospace Center (DLR) and others.
│ │ │ │  This application is based on code provided by the Eclipse SUMO project.
│ │ │ │  These core components are available under the conditions of the Eclipse Public License v2.
│ │ │ │  SPDX-License-Identifier: EPL-2.0
│ │ │ │  https://www.eclipse.org/legal/epl-v20.html
│ │ │ │  https://www.eclipse.dev/sumo
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -1755093,25 +1755093,25 @@
│ │ │ │  	bl      18f720 <xercesc_3_2::HandlerBase::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x57a0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r31
│ │ │ │  	addi    r29,r1,184
│ │ │ │  	bl      192e20 <xercesc_3_2::HandlerBase::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x20a0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addi    r26,r1,200
│ │ │ │ -	li      r9,106
│ │ │ │ +	li      r9,110
│ │ │ │  	li      r5,0
│ │ │ │  	mr      r3,r29
│ │ │ │  	mr      r4,r31
│ │ │ │  	std     r9,176(r1)
│ │ │ │  	std     r26,184(r1)
│ │ │ │  	bl      18e960 <xercesc_3_2::HandlerBase::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x6560>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	ld      r9,176(r1)
│ │ │ │  	mr      r4,r24
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	std     r3,184(r1)
│ │ │ │  	std     r9,200(r1)
│ │ │ │  	bl      191340 <xercesc_3_2::HandlerBase::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x3b80>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	ld      r9,176(r1)
│ │ │ │  	ld      r10,184(r1)
│ │ │ │  	li      r8,0
│ │ │ │ @@ -3157154,15 +3157154,15 @@
│ │ │ │  	bl      193660 <xercesc_3_2::HandlerBase::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1860>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      18ec00 <xercesc_3_2::HandlerBase::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x62c0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-43
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,16808
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      1915a0 <xercesc_3_2::HandlerBase::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x3920>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      18eb40 <xercesc_3_2::HandlerBase::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x6380>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -10343,16 +10343,16 @@
│ │ │ │    0x00ea0b50 20696e70 75742066 696c6522 20636174  input file" cat
│ │ │ │    0x00ea0b60 65676f72 793d2270 726f6365 7373696e egory="processin
│ │ │ │    0x00ea0b70 67222072 65717569 7265643d 22747275 g" required="tru
│ │ │ │    0x00ea0b80 65222070 6f736974 696f6e61 6c3d2274 e" positional="t
│ │ │ │    0x00ea0b90 72756522 2f3e3c2f 636f6e66 69677572 rue"/></configur
│ │ │ │    0x00ea0ba0 6174696f 6e3e0000 3c212d2d 2067656e ation>..<!-- gen
│ │ │ │    0x00ea0bb0 65726174 6564206f 6e203230 32352d31 erated on 2025-1
│ │ │ │ -  0x00ea0bc0 312d3136 5430383a 35393a30 332e3630 1-16T08:59:03.60
│ │ │ │ -  0x00ea0bd0 35363039 2b30303a 30302062 79204563 5609+00:00 by Ec
│ │ │ │ +  0x00ea0bc0 312d3136 5431353a 34323a31 322e3739 1-16T15:42:12.79
│ │ │ │ +  0x00ea0bd0 39313634 2b30303a 30302062 79204563 9164+00:00 by Ec
│ │ │ │    0x00ea0be0 6c697073 65205355 4d4f2073 756d6f20 lipse SUMO sumo 
│ │ │ │    0x00ea0bf0 312e3235 2e302d2d 3e000000 00000000 1.25.0-->.......
│ │ │ │    0x00ea0c00 3c3f786d 6c207665 7273696f 6e3d2231 <?xml version="1
│ │ │ │    0x00ea0c10 2e302220 656e636f 64696e67 3d225554 .0" encoding="UT
│ │ │ │    0x00ea0c20 462d3822 3f3e0000 3c73756d 6f436f6e F-8"?>..<sumoCon
│ │ │ │    0x00ea0c30 66696775 72617469 6f6e2078 6d6c6e73 figuration xmlns
│ │ │ │    0x00ea0c40 3a787369 3d226874 74703a2f 2f777777 :xsi="http://www
│ │ │ │ @@ -14462,16 +14462,16 @@
│ │ │ │    0x00eb0cc0 696e6773 20696e20 74686520 67697665 ings in the give
│ │ │ │    0x00eb0cd0 6e207365 7474696e 6773206f 75747075 n settings outpu
│ │ │ │    0x00eb0ce0 74206669 6c65222f 3e202020 203c2f67 t file"/>    </g
│ │ │ │    0x00eb0cf0 75695f6f 6e6c793e 00000000 00000000 ui_only>........
│ │ │ │    0x00eb0d00 3c2f7375 6d6f436f 6e666967 75726174 </sumoConfigurat
│ │ │ │    0x00eb0d10 696f6e3e 00000000 3c212d2d 2067656e ion>....<!-- gen
│ │ │ │    0x00eb0d20 65726174 6564206f 6e203230 32352d31 erated on 2025-1
│ │ │ │ -  0x00eb0d30 312d3136 5430383a 35393a30 332e3735 1-16T08:59:03.75
│ │ │ │ -  0x00eb0d40 39303631 2b30303a 30302062 79204563 9061+00:00 by Ec
│ │ │ │ +  0x00eb0d30 312d3136 5431353a 34323a31 322e3935 1-16T15:42:12.95
│ │ │ │ +  0x00eb0d40 37353836 2b30303a 30302062 79204563 7586+00:00 by Ec
│ │ │ │    0x00eb0d50 6c697073 65205355 4d4f206e 65746765 lipse SUMO netge
│ │ │ │    0x00eb0d60 6e657261 74652031 2e32352e 302d2d3e nerate 1.25.0-->
│ │ │ │    0x00eb0d70 00000000 00000000 3c6e6574 67656e65 ........<netgene
│ │ │ │    0x00eb0d80 72617465 436f6e66 69677572 6174696f rateConfiguratio
│ │ │ │    0x00eb0d90 6e20786d 6c6e733a 7873693d 22687474 n xmlns:xsi="htt
│ │ │ │    0x00eb0da0 703a2f2f 7777772e 77332e6f 72672f32 p://www.w3.org/2
│ │ │ │    0x00eb0db0 3030312f 584d4c53 6368656d 612d696e 001/XMLSchema-in
│ │ │ │ @@ -57511,20 +57511,20 @@
│ │ │ │    0x00f58f50 756c6174 696f6e20 6f662055 7262616e ulation of Urban
│ │ │ │    0x00f58f60 204d4f62 696c6974 79000000 00000000  MObility.......
│ │ │ │    0x00f58f70 47726170 68696361 6c206564 69746f72 Graphical editor
│ │ │ │    0x00f58f80 20666f72 20726f61 64206e65 74776f72  for road networ
│ │ │ │    0x00f58f90 6b732061 6e642069 6e667261 73747275 ks and infrastru
│ │ │ │    0x00f58fa0 63747572 652e0000 4c696e75 782d362e cture...Linux-6.
│ │ │ │    0x00f58fb0 31322e35 372b6465 6231332d 706f7765 12.57+deb13-powe
│ │ │ │ -  0x00f58fc0 72706336 346c6520 70706336 346c6520 rpc64le ppc64le 
│ │ │ │ -  0x00f58fd0 474e5520 31352e32 2e30204e 6f6e6520 GNU 15.2.0 None 
│ │ │ │ -  0x00f58fe0 464d4920 50726f6a 20475549 20496e74 FMI Proj GUI Int
│ │ │ │ -  0x00f58ff0 6c205357 49472045 6967656e 20474441 l SWIG Eigen GDA
│ │ │ │ -  0x00f59000 4c204646 6d706567 204f5347 20474c32 L FFmpeg OSG GL2
│ │ │ │ -  0x00f59010 50530000 00000000 53554d4f 5f484f4d PS......SUMO_HOM
│ │ │ │ +  0x00f58fc0 72706336 346c652d 36346b20 70706336 rpc64le-64k ppc6
│ │ │ │ +  0x00f58fd0 346c6520 474e5520 31352e32 2e30204e 4le GNU 15.2.0 N
│ │ │ │ +  0x00f58fe0 6f6e6520 464d4920 50726f6a 20475549 one FMI Proj GUI
│ │ │ │ +  0x00f58ff0 20496e74 6c205357 49472045 6967656e  Intl SWIG Eigen
│ │ │ │ +  0x00f59000 20474441 4c204646 6d706567 204f5347  GDAL FFmpeg OSG
│ │ │ │ +  0x00f59010 20474c32 50530000 53554d4f 5f484f4d  GL2PS..SUMO_HOM
│ │ │ │    0x00f59020 453a2000 00000000 436f7079 72696768 E: .....Copyrigh
│ │ │ │    0x00f59030 74202843 29203230 30312d32 30323520 t (C) 2001-2025 
│ │ │ │    0x00f59040 4765726d 616e2041 65726f73 70616365 German Aerospace
│ │ │ │    0x00f59050 2043656e 74657220 28444c52 2920616e  Center (DLR) an
│ │ │ │    0x00f59060 64206f74 68657273 2e000000 00000000 d others........
│ │ │ │    0x00f59070 54686973 20617070 6c696361 74696f6e This application
│ │ │ │    0x00f59080 20697320 62617365 64206f6e 20636f64  is based on cod
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 35393637 35663930 64646338 32306236 59675f90ddc820b6
│ │ │ │ -  0x00000010 38623336 34663164 34633763 64393938 8b364f1d4c7cd998
│ │ │ │ -  0x00000020 64623736 61352e64 65627567 00000000 db76a5.debug....
│ │ │ │ -  0x00000030 b1e4e8f9                            ....
│ │ │ │ +  0x00000000 65393339 63393733 32326536 35636364 e939c97322e65ccd
│ │ │ │ +  0x00000010 36316232 62366438 36626537 64393964 61b2b6d86be7d99d
│ │ │ │ +  0x00000020 30326130 37662e64 65627567 00000000 02a07f.debug....
│ │ │ │ +  0x00000030 98136346                            ..cF
│ │ ├── ./usr/bin/netgenerate
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 623c89833bb70a062ad3ee5edf5c1c3d72f1a218
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: f6c89e87cbfe60bd8979a388d025fdafa79aa465
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │ -/lib64/ld64.so.2
│ │ │ │ +e/lib64/ld64.so.2
│ │ │ │  MN93($./<
│ │ │ │  #!-qA3TO
│ │ │ │  _ZNK11xercesc_3_213XMLAttDefList12getProtoTypeEv
│ │ │ │  _ZTIN11xercesc_3_217SAXParseExceptionE
│ │ │ │  _ZNK11xercesc_3_213XMLAttDefList14isSerializableEv
│ │ │ │  _ITM_registerTMCloneTable
│ │ │ │  _ZN11xercesc_3_217SAXParseExceptionC1ERKS0_
│ │ │ │ @@ -3919,15 +3919,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -700016,15 +700016,15 @@
│ │ │ │  	bl      24e00 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1b00>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      25860 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x10a0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-11
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,13160
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      25120 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x17e0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      24aa0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1e60>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -5897,20 +5897,20 @@
│ │ │ │    0x003aa710 722e6465 3e000000 4f707469 6f6e7320 r.de>...Options 
│ │ │ │    0x003aa720 7365743a 00000000 3a200000 00000000 set:....: ......
│ │ │ │    0x003aa730 3a203c49 4e56414c 49443e00 00000000 : <INVALID>.....
│ │ │ │    0x003aa740 6c616e67 75616765 00000000 00000000 language........
│ │ │ │    0x003aa750 20427569 6c642066 65617475 7265733a  Build features:
│ │ │ │    0x003aa760 20000000 00000000 4c696e75 782d362e  .......Linux-6.
│ │ │ │    0x003aa770 31322e35 372b6465 6231332d 706f7765 12.57+deb13-powe
│ │ │ │ -  0x003aa780 72706336 346c6520 70706336 346c6520 rpc64le ppc64le 
│ │ │ │ -  0x003aa790 474e5520 31352e32 2e30204e 6f6e6520 GNU 15.2.0 None 
│ │ │ │ -  0x003aa7a0 464d4920 50726f6a 20475549 20496e74 FMI Proj GUI Int
│ │ │ │ -  0x003aa7b0 6c205357 49472045 6967656e 20474441 l SWIG Eigen GDA
│ │ │ │ -  0x003aa7c0 4c204646 6d706567 204f5347 20474c32 L FFmpeg OSG GL2
│ │ │ │ -  0x003aa7d0 50530000 00000000 204c6963 656e7365 PS...... License
│ │ │ │ +  0x003aa780 72706336 346c652d 36346b20 70706336 rpc64le-64k ppc6
│ │ │ │ +  0x003aa790 346c6520 474e5520 31352e32 2e30204e 4le GNU 15.2.0 N
│ │ │ │ +  0x003aa7a0 6f6e6520 464d4920 50726f6a 20475549 one FMI Proj GUI
│ │ │ │ +  0x003aa7b0 20496e74 6c205357 49472045 6967656e  Intl SWIG Eigen
│ │ │ │ +  0x003aa7c0 20474441 4c204646 6d706567 204f5347  GDAL FFmpeg OSG
│ │ │ │ +  0x003aa7d0 20474c32 50530000 204c6963 656e7365  GL2PS.. License
│ │ │ │    0x003aa7e0 2045504c 2d322e30 3a204563 6c697073  EPL-2.0: Eclips
│ │ │ │    0x003aa7f0 65205075 626c6963 204c6963 656e7365 e Public License
│ │ │ │    0x003aa800 20566572 73696f6e 2032203c 68747470  Version 2 <http
│ │ │ │    0x003aa810 733a2f2f 65636c69 7073652e 6f72672f s://eclipse.org/
│ │ │ │    0x003aa820 6c656761 6c2f6570 6c2d7632 302e6874 legal/epl-v20.ht
│ │ │ │    0x003aa830 6d6c3e00 00000000 20557365 202d2d68 ml>..... Use --h
│ │ │ │    0x003aa840 656c7020 746f2067 65742074 6865206c elp to get the l
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 33633839 38333362 62373061 30363261 3c89833bb70a062a
│ │ │ │ -  0x00000010 64336565 35656466 35633163 33643732 d3ee5edf5c1c3d72
│ │ │ │ -  0x00000020 66316132 31382e64 65627567 00000000 f1a218.debug....
│ │ │ │ -  0x00000030 afea62fe                            ..b.
│ │ │ │ +  0x00000000 63383965 38376362 66653630 62643839 c89e87cbfe60bd89
│ │ │ │ +  0x00000010 37396133 38386430 32356664 61666137 79a388d025fdafa7
│ │ │ │ +  0x00000020 39616134 36352e64 65627567 00000000 9aa465.debug....
│ │ │ │ +  0x00000030 3d6aea7f                            =j..
│ │ ├── ./usr/bin/od2trips
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: d5e91db7b93abb561558f5a910c17a5b8b6900d1
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 3effb9a8100f496b7f64505e9a89c79b38233328
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │ -/lib64/ld64.so.2
│ │ │ │ +8#3(/lib64/ld64.so.2
│ │ │ │  _ITM_deregisterTMCloneTable
│ │ │ │  __gmon_start__
│ │ │ │  _ITM_registerTMCloneTable
│ │ │ │  _ZN11xercesc_3_214DefaultHandler13resolveEntityEPKDsS2_
│ │ │ │  _ZThn32_N11xercesc_3_214DefaultHandler8endCDATAEv
│ │ │ │  _ZThn40_N11xercesc_3_214DefaultHandler11elementDeclEPKDsS2_
│ │ │ │  _ZTIN11xercesc_3_215DocumentHandlerE
│ │ │ │ @@ -1402,15 +1402,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -97370,15 +97370,15 @@
│ │ │ │  	bl      1efc0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x780>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      1f660 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xe0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-6
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,-17624
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      1e100 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1640>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      1f6c0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x80>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -676,20 +676,20 @@
│ │ │ │    0x001533d0 722e6465 3e000000 4f707469 6f6e7320 r.de>...Options 
│ │ │ │    0x001533e0 7365743a 00000000 3a200000 00000000 set:....: ......
│ │ │ │    0x001533f0 3a203c49 4e56414c 49443e00 00000000 : <INVALID>.....
│ │ │ │    0x00153400 6c616e67 75616765 00000000 00000000 language........
│ │ │ │    0x00153410 20427569 6c642066 65617475 7265733a  Build features:
│ │ │ │    0x00153420 20000000 00000000 4c696e75 782d362e  .......Linux-6.
│ │ │ │    0x00153430 31322e35 372b6465 6231332d 706f7765 12.57+deb13-powe
│ │ │ │ -  0x00153440 72706336 346c6520 70706336 346c6520 rpc64le ppc64le 
│ │ │ │ -  0x00153450 474e5520 31352e32 2e30204e 6f6e6520 GNU 15.2.0 None 
│ │ │ │ -  0x00153460 464d4920 50726f6a 20475549 20496e74 FMI Proj GUI Int
│ │ │ │ -  0x00153470 6c205357 49472045 6967656e 20474441 l SWIG Eigen GDA
│ │ │ │ -  0x00153480 4c204646 6d706567 204f5347 20474c32 L FFmpeg OSG GL2
│ │ │ │ -  0x00153490 50530000 00000000 204c6963 656e7365 PS...... License
│ │ │ │ +  0x00153440 72706336 346c652d 36346b20 70706336 rpc64le-64k ppc6
│ │ │ │ +  0x00153450 346c6520 474e5520 31352e32 2e30204e 4le GNU 15.2.0 N
│ │ │ │ +  0x00153460 6f6e6520 464d4920 50726f6a 20475549 one FMI Proj GUI
│ │ │ │ +  0x00153470 20496e74 6c205357 49472045 6967656e  Intl SWIG Eigen
│ │ │ │ +  0x00153480 20474441 4c204646 6d706567 204f5347  GDAL FFmpeg OSG
│ │ │ │ +  0x00153490 20474c32 50530000 204c6963 656e7365  GL2PS.. License
│ │ │ │    0x001534a0 2045504c 2d322e30 3a204563 6c697073  EPL-2.0: Eclips
│ │ │ │    0x001534b0 65205075 626c6963 204c6963 656e7365 e Public License
│ │ │ │    0x001534c0 20566572 73696f6e 2032203c 68747470  Version 2 <http
│ │ │ │    0x001534d0 733a2f2f 65636c69 7073652e 6f72672f s://eclipse.org/
│ │ │ │    0x001534e0 6c656761 6c2f6570 6c2d7632 302e6874 legal/epl-v20.ht
│ │ │ │    0x001534f0 6d6c3e00 00000000 20557365 202d2d68 ml>..... Use --h
│ │ │ │    0x00153500 656c7020 746f2067 65742074 6865206c elp to get the l
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 65393164 62376239 33616262 35363135 e91db7b93abb5615
│ │ │ │ -  0x00000010 35386635 61393130 63313761 35623862 58f5a910c17a5b8b
│ │ │ │ -  0x00000020 36393030 64312e64 65627567 00000000 6900d1.debug....
│ │ │ │ -  0x00000030 7bced972                            {..r
│ │ │ │ +  0x00000000 66666239 61383130 30663439 36623766 ffb9a8100f496b7f
│ │ │ │ +  0x00000010 36343530 35653961 38396337 39623338 64505e9a89c79b38
│ │ │ │ +  0x00000020 32333333 32382e64 65627567 00000000 233328.debug....
│ │ │ │ +  0x00000030 6e28b2d9                            n(..
│ │ ├── ./usr/bin/polyconvert
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 8bd40da1378c2bd84ff5557594268f833038608d
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: e5c8a0c6350fa8837325c6263036580654582af1
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -1705,15 +1705,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -127180,15 +127180,15 @@
│ │ │ │  	bl      24fa0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xbc0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      25400 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x760>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-6
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,14392
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      25280 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x8e0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      25b00 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x60>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -1150,20 +1150,20 @@
│ │ │ │    0x0017b0e0 3c73756d 6f40646c 722e6465 3e000000 <sumo@dlr.de>...
│ │ │ │    0x0017b0f0 4f707469 6f6e7320 7365743a 00000000 Options set:....
│ │ │ │    0x0017b100 3a203c49 4e56414c 49443e00 00000000 : <INVALID>.....
│ │ │ │    0x0017b110 6c616e67 75616765 00000000 00000000 language........
│ │ │ │    0x0017b120 20427569 6c642066 65617475 7265733a  Build features:
│ │ │ │    0x0017b130 20000000 00000000 4c696e75 782d362e  .......Linux-6.
│ │ │ │    0x0017b140 31322e35 372b6465 6231332d 706f7765 12.57+deb13-powe
│ │ │ │ -  0x0017b150 72706336 346c6520 70706336 346c6520 rpc64le ppc64le 
│ │ │ │ -  0x0017b160 474e5520 31352e32 2e30204e 6f6e6520 GNU 15.2.0 None 
│ │ │ │ -  0x0017b170 464d4920 50726f6a 20475549 20496e74 FMI Proj GUI Int
│ │ │ │ -  0x0017b180 6c205357 49472045 6967656e 20474441 l SWIG Eigen GDA
│ │ │ │ -  0x0017b190 4c204646 6d706567 204f5347 20474c32 L FFmpeg OSG GL2
│ │ │ │ -  0x0017b1a0 50530000 00000000 204c6963 656e7365 PS...... License
│ │ │ │ +  0x0017b150 72706336 346c652d 36346b20 70706336 rpc64le-64k ppc6
│ │ │ │ +  0x0017b160 346c6520 474e5520 31352e32 2e30204e 4le GNU 15.2.0 N
│ │ │ │ +  0x0017b170 6f6e6520 464d4920 50726f6a 20475549 one FMI Proj GUI
│ │ │ │ +  0x0017b180 20496e74 6c205357 49472045 6967656e  Intl SWIG Eigen
│ │ │ │ +  0x0017b190 20474441 4c204646 6d706567 204f5347  GDAL FFmpeg OSG
│ │ │ │ +  0x0017b1a0 20474c32 50530000 204c6963 656e7365  GL2PS.. License
│ │ │ │    0x0017b1b0 2045504c 2d322e30 3a204563 6c697073  EPL-2.0: Eclips
│ │ │ │    0x0017b1c0 65205075 626c6963 204c6963 656e7365 e Public License
│ │ │ │    0x0017b1d0 20566572 73696f6e 2032203c 68747470  Version 2 <http
│ │ │ │    0x0017b1e0 733a2f2f 65636c69 7073652e 6f72672f s://eclipse.org/
│ │ │ │    0x0017b1f0 6c656761 6c2f6570 6c2d7632 302e6874 legal/epl-v20.ht
│ │ │ │    0x0017b200 6d6c3e00 00000000 20557365 202d2d68 ml>..... Use --h
│ │ │ │    0x0017b210 656c7020 746f2067 65742074 6865206c elp to get the l
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 64343064 61313337 38633262 64383466 d40da1378c2bd84f
│ │ │ │ -  0x00000010 66353535 37353934 32363866 38333330 f5557594268f8330
│ │ │ │ -  0x00000020 33383630 38642e64 65627567 00000000 38608d.debug....
│ │ │ │ -  0x00000030 6fa9ff57                            o..W
│ │ │ │ +  0x00000000 63386130 63363335 30666138 38333733 c8a0c6350fa88373
│ │ │ │ +  0x00000010 32356336 32363330 33363538 30363534 25c6263036580654
│ │ │ │ +  0x00000020 35383261 66312e64 65627567 00000000 582af1.debug....
│ │ │ │ +  0x00000030 66afa5b5                            f...
│ │ ├── ./usr/bin/sumo
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 03c9da75573e1f84fc4849f7ceda6436ef338ed4
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: e00bad8466efcbc2cdc49fdc7f5cf5fc0629ea90
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -12085,15 +12085,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -2186478,15 +2186478,15 @@
│ │ │ │  	bl      58000 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x1380>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      58700 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xc80>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-28
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,25648
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      58820 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xb60>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      58400 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xf80>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -17811,20 +17811,20 @@
│ │ │ │    0x009dbed0 69612025 2e000000 3c73756d 6f40646c ia %....<sumo@dl
│ │ │ │    0x009dbee0 722e6465 3e000000 4f707469 6f6e7320 r.de>...Options 
│ │ │ │    0x009dbef0 7365743a 00000000 3a203c49 4e56414c set:....: <INVAL
│ │ │ │    0x009dbf00 49443e00 00000000 6c616e67 75616765 ID>.....language
│ │ │ │    0x009dbf10 00000000 00000000 20427569 6c642066 ........ Build f
│ │ │ │    0x009dbf20 65617475 7265733a 20000000 00000000 eatures: .......
│ │ │ │    0x009dbf30 4c696e75 782d362e 31322e35 372b6465 Linux-6.12.57+de
│ │ │ │ -  0x009dbf40 6231332d 706f7765 72706336 346c6520 b13-powerpc64le 
│ │ │ │ -  0x009dbf50 70706336 346c6520 474e5520 31352e32 ppc64le GNU 15.2
│ │ │ │ -  0x009dbf60 2e30204e 6f6e6520 464d4920 50726f6a .0 None FMI Proj
│ │ │ │ -  0x009dbf70 20475549 20496e74 6c205357 49472045  GUI Intl SWIG E
│ │ │ │ -  0x009dbf80 6967656e 20474441 4c204646 6d706567 igen GDAL FFmpeg
│ │ │ │ -  0x009dbf90 204f5347 20474c32 50530000 00000000  OSG GL2PS......
│ │ │ │ +  0x009dbf40 6231332d 706f7765 72706336 346c652d b13-powerpc64le-
│ │ │ │ +  0x009dbf50 36346b20 70706336 346c6520 474e5520 64k ppc64le GNU 
│ │ │ │ +  0x009dbf60 31352e32 2e30204e 6f6e6520 464d4920 15.2.0 None FMI 
│ │ │ │ +  0x009dbf70 50726f6a 20475549 20496e74 6c205357 Proj GUI Intl SW
│ │ │ │ +  0x009dbf80 49472045 6967656e 20474441 4c204646 IG Eigen GDAL FF
│ │ │ │ +  0x009dbf90 6d706567 204f5347 20474c32 50530000 mpeg OSG GL2PS..
│ │ │ │    0x009dbfa0 204c6963 656e7365 2045504c 2d322e30  License EPL-2.0
│ │ │ │    0x009dbfb0 3a204563 6c697073 65205075 626c6963 : Eclipse Public
│ │ │ │    0x009dbfc0 204c6963 656e7365 20566572 73696f6e  License Version
│ │ │ │    0x009dbfd0 2032203c 68747470 733a2f2f 65636c69  2 <https://ecli
│ │ │ │    0x009dbfe0 7073652e 6f72672f 6c656761 6c2f6570 pse.org/legal/ep
│ │ │ │    0x009dbff0 6c2d7632 302e6874 6d6c3e00 00000000 l-v20.html>.....
│ │ │ │    0x009dc000 20557365 202d2d68 656c7020 746f2067  Use --help to g
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 63396461 37353537 33653166 38346663 c9da75573e1f84fc
│ │ │ │ -  0x00000010 34383439 66376365 64613634 33366566 4849f7ceda6436ef
│ │ │ │ -  0x00000020 33333865 64342e64 65627567 00000000 338ed4.debug....
│ │ │ │ -  0x00000030 04032c52                            ..,R
│ │ │ │ +  0x00000000 30626164 38343636 65666362 63326364 0bad8466efcbc2cd
│ │ │ │ +  0x00000010 63343966 64633766 35636635 66633036 c49fdc7f5cf5fc06
│ │ │ │ +  0x00000020 32396561 39302e64 65627567 00000000 29ea90.debug....
│ │ │ │ +  0x00000030 6071b294                            `q..
│ │ ├── ./usr/bin/sumo-gui
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 6dd057720681e6f46b3d07cc6649e908e7d2dbda
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 1c853ba8f1f57fa34b0d7733c5ead62eb7381143
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.ABI-tag
│ │ │ │    Owner                Data size 	Description
│ │ │ │    GNU                  0x00000010	NT_GNU_ABI_TAG (ABI version tag)	    OS: Linux, ABI: 3.10.0
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │ -/lib64/ld64.so.2
│ │ │ │ +C/lib64/ld64.so.2
│ │ │ │  t\& @@H@
│ │ │ │  _ITM_deregisterTMCloneTable
│ │ │ │  __gmon_start__
│ │ │ │  _ITM_registerTMCloneTable
│ │ │ │  _ZN11xercesc_3_214DefaultHandler13resolveEntityEPKDsS2_
│ │ │ │  _ZThn32_N11xercesc_3_214DefaultHandler8endCDATAEv
│ │ │ │  _ZThn40_N11xercesc_3_214DefaultHandler11elementDeclEPKDsS2_
│ │ │ │ @@ -9736,15 +9736,15 @@
│ │ │ │  Overflow in time computation occurred.
│ │ │ │  GUITLLogicPhasesTrackerWindow::GUITLLogicPhasesTrackerPanel
│ │ │ │  GUITLLogicPhasesTrackerWindow
│ │ │ │  About Eclipse SUMO sumo-gui
│ │ │ │  SUMO sumo-gui 1.25.0
│ │ │ │  Eclipse SUMO - Simulation of Urban MObility
│ │ │ │  Graphical user interface for the microscopic, multi-modal traffic simulation SUMO.
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │  SUMO_HOME: 
│ │ │ │  Copyright (C) 2001-2025 German Aerospace Center (DLR) and others.
│ │ │ │  This application is based on code provided by the Eclipse SUMO project.
│ │ │ │  These core components are available under the conditions of the Eclipse Public License v2.
│ │ │ │  SPDX-License-Identifier: EPL-2.0
│ │ │ │  https://www.eclipse.org/legal/epl-v20.html
│ │ │ │  https://eclipse.dev/sumo
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -2797392,15 +2797392,15 @@
│ │ │ │  	bl      161880 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x4bc0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      15e340 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x8100>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-49
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,-23240
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      15ffe0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x6460>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      1659a0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xaa0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -2017,20 +2017,20 @@
│ │ │ │    0x00cef1e0 47726170 68696361 6c207573 65722069 Graphical user i
│ │ │ │    0x00cef1f0 6e746572 66616365 20666f72 20746865 nterface for the
│ │ │ │    0x00cef200 206d6963 726f7363 6f706963 2c206d75  microscopic, mu
│ │ │ │    0x00cef210 6c74692d 6d6f6461 6c207472 61666669 lti-modal traffi
│ │ │ │    0x00cef220 63207369 6d756c61 74696f6e 2053554d c simulation SUM
│ │ │ │    0x00cef230 4f2e0000 00000000 4c696e75 782d362e O.......Linux-6.
│ │ │ │    0x00cef240 31322e35 372b6465 6231332d 706f7765 12.57+deb13-powe
│ │ │ │ -  0x00cef250 72706336 346c6520 70706336 346c6520 rpc64le ppc64le 
│ │ │ │ -  0x00cef260 474e5520 31352e32 2e30204e 6f6e6520 GNU 15.2.0 None 
│ │ │ │ -  0x00cef270 464d4920 50726f6a 20475549 20496e74 FMI Proj GUI Int
│ │ │ │ -  0x00cef280 6c205357 49472045 6967656e 20474441 l SWIG Eigen GDA
│ │ │ │ -  0x00cef290 4c204646 6d706567 204f5347 20474c32 L FFmpeg OSG GL2
│ │ │ │ -  0x00cef2a0 50530000 00000000 53554d4f 5f484f4d PS......SUMO_HOM
│ │ │ │ +  0x00cef250 72706336 346c652d 36346b20 70706336 rpc64le-64k ppc6
│ │ │ │ +  0x00cef260 346c6520 474e5520 31352e32 2e30204e 4le GNU 15.2.0 N
│ │ │ │ +  0x00cef270 6f6e6520 464d4920 50726f6a 20475549 one FMI Proj GUI
│ │ │ │ +  0x00cef280 20496e74 6c205357 49472045 6967656e  Intl SWIG Eigen
│ │ │ │ +  0x00cef290 20474441 4c204646 6d706567 204f5347  GDAL FFmpeg OSG
│ │ │ │ +  0x00cef2a0 20474c32 50530000 53554d4f 5f484f4d  GL2PS..SUMO_HOM
│ │ │ │    0x00cef2b0 453a2000 00000000 436f7079 72696768 E: .....Copyrigh
│ │ │ │    0x00cef2c0 74202843 29203230 30312d32 30323520 t (C) 2001-2025 
│ │ │ │    0x00cef2d0 4765726d 616e2041 65726f73 70616365 German Aerospace
│ │ │ │    0x00cef2e0 2043656e 74657220 28444c52 2920616e  Center (DLR) an
│ │ │ │    0x00cef2f0 64206f74 68657273 2e000000 00000000 d others........
│ │ │ │    0x00cef300 54686973 20617070 6c696361 74696f6e This application
│ │ │ │    0x00cef310 20697320 62617365 64206f6e 20636f64  is based on cod
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 64303537 37323036 38316536 66343662 d057720681e6f46b
│ │ │ │ -  0x00000010 33643037 63633636 34396539 30386537 3d07cc6649e908e7
│ │ │ │ -  0x00000020 64326462 64612e64 65627567 00000000 d2dbda.debug....
│ │ │ │ -  0x00000030 988aedc4                            ....
│ │ │ │ +  0x00000000 38353362 61386631 66353766 61333462 853ba8f1f57fa34b
│ │ │ │ +  0x00000010 30643737 33336335 65616436 32656237 0d7733c5ead62eb7
│ │ │ │ +  0x00000020 33383131 34332e64 65627567 00000000 381143.debug....
│ │ │ │ +  0x00000030 9e794fd8                            .yO.
│ │ ├── ./usr/lib/powerpc64le-linux-gnu/jni/liblibsumojni.so
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,4 +1,4 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 099f4be673b3c129c6c7f03fab9221700361ebfd
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: c1cfe1d89be52a10474c8bbce82e60f49e9db068
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -38207,15 +38207,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -3086013,15 +3086013,15 @@
│ │ │ │  	bl      3ca0a0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x3272c>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      3bbc20 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x40bac>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-55
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,-25104
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      3c83e0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x343ec>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      3eaa20 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x11dac>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── readelf --wide --decompress --hex-dump=.rodata {}
│ │ │ │ @@ -18441,20 +18441,20 @@
│ │ │ │    0x01301f90 69612025 2e000000 3c73756d 6f40646c ia %....<sumo@dl
│ │ │ │    0x01301fa0 722e6465 3e000000 4f707469 6f6e7320 r.de>...Options 
│ │ │ │    0x01301fb0 7365743a 00000000 3a203c49 4e56414c set:....: <INVAL
│ │ │ │    0x01301fc0 49443e00 00000000 6c616e67 75616765 ID>.....language
│ │ │ │    0x01301fd0 00000000 00000000 20427569 6c642066 ........ Build f
│ │ │ │    0x01301fe0 65617475 7265733a 20000000 00000000 eatures: .......
│ │ │ │    0x01301ff0 4c696e75 782d362e 31322e35 372b6465 Linux-6.12.57+de
│ │ │ │ -  0x01302000 6231332d 706f7765 72706336 346c6520 b13-powerpc64le 
│ │ │ │ -  0x01302010 70706336 346c6520 474e5520 31352e32 ppc64le GNU 15.2
│ │ │ │ -  0x01302020 2e30204e 6f6e6520 464d4920 50726f6a .0 None FMI Proj
│ │ │ │ -  0x01302030 20475549 20496e74 6c205357 49472045  GUI Intl SWIG E
│ │ │ │ -  0x01302040 6967656e 20474441 4c204646 6d706567 igen GDAL FFmpeg
│ │ │ │ -  0x01302050 204f5347 20474c32 50530000 00000000  OSG GL2PS......
│ │ │ │ +  0x01302000 6231332d 706f7765 72706336 346c652d b13-powerpc64le-
│ │ │ │ +  0x01302010 36346b20 70706336 346c6520 474e5520 64k ppc64le GNU 
│ │ │ │ +  0x01302020 31352e32 2e30204e 6f6e6520 464d4920 15.2.0 None FMI 
│ │ │ │ +  0x01302030 50726f6a 20475549 20496e74 6c205357 Proj GUI Intl SW
│ │ │ │ +  0x01302040 49472045 6967656e 20474441 4c204646 IG Eigen GDAL FF
│ │ │ │ +  0x01302050 6d706567 204f5347 20474c32 50530000 mpeg OSG GL2PS..
│ │ │ │    0x01302060 204c6963 656e7365 2045504c 2d322e30  License EPL-2.0
│ │ │ │    0x01302070 3a204563 6c697073 65205075 626c6963 : Eclipse Public
│ │ │ │    0x01302080 204c6963 656e7365 20566572 73696f6e  License Version
│ │ │ │    0x01302090 2032203c 68747470 733a2f2f 65636c69  2 <https://ecli
│ │ │ │    0x013020a0 7073652e 6f72672f 6c656761 6c2f6570 pse.org/legal/ep
│ │ │ │    0x013020b0 6c2d7632 302e6874 6d6c3e00 00000000 l-v20.html>.....
│ │ │ │    0x013020c0 20557365 202d2d68 656c7020 746f2067  Use --help to g
│ │ │ ├── readelf --wide --decompress --hex-dump=.gnu_debuglink {}
│ │ │ │ @@ -1,7 +1,7 @@
│ │ │ │  
│ │ │ │  Hex dump of section '.gnu_debuglink':
│ │ │ │ -  0x00000000 39663462 65363733 62336331 32396336 9f4be673b3c129c6
│ │ │ │ -  0x00000010 63376630 33666162 39323231 37303033 c7f03fab92217003
│ │ │ │ -  0x00000020 36316562 66642e64 65627567 00000000 61ebfd.debug....
│ │ │ │ -  0x00000030 dde19a2e                            ....
│ │ │ │ +  0x00000000 63666531 64383962 65353261 31303437 cfe1d89be52a1047
│ │ │ │ +  0x00000010 34633862 62636538 32653630 66343965 4c8bbce82e60f49e
│ │ │ │ +  0x00000020 39646230 36382e64 65627567 00000000 9db068.debug....
│ │ │ │ +  0x00000030 a14e9672                            .N.r
│ │ ├── ./usr/lib/powerpc64le-linux-gnu/libsumocpp.so
│ │ │┄ File has been modified after NT_GNU_BUILD_ID has been applied.
│ │ │ ├── readelf --wide --notes {}
│ │ │ │ @@ -1,4 +1,4 @@
│ │ │ │  
│ │ │ │  Displaying notes found in: .note.gnu.build-id
│ │ │ │    Owner                Data size 	Description
│ │ │ │ -  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: b42d93cfb99013590835d69a7bb62db7923fb9cc
│ │ │ │ +  GNU                  0x00000014	NT_GNU_BUILD_ID (unique build ID bitstring)	    Build ID: 8921f0aa8184c1f1f383eee023156ef8791e163b
│ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ @@ -33448,15 +33448,15 @@
│ │ │ │  <https://github.com/eclipse-sumo/sumo/issues>
│ │ │ │  Get in contact via %.
│ │ │ │  <sumo@dlr.de>
│ │ │ │  Options set:
│ │ │ │  : <INVALID>
│ │ │ │  language
│ │ │ │   Build features: 
│ │ │ │ -Linux-6.12.57+deb13-powerpc64le ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │ +Linux-6.12.57+deb13-powerpc64le-64k ppc64le GNU 15.2.0 None FMI Proj GUI Intl SWIG Eigen GDAL FFmpeg OSG GL2PS
│ │ │ │   License EPL-2.0: Eclipse Public License Version 2 <https://eclipse.org/legal/epl-v20.html>
│ │ │ │   Use --help to get the list of options.
│ │ │ │   is part of SUMO.
│ │ │ │  This program and the accompanying materials
│ │ │ │  are made available under the terms of the Eclipse Public License v2.0
│ │ │ │  which accompanies this distribution, and is available at
│ │ │ │  http://www.eclipse.org/legal/epl-v20.html
│ │ │ ├── objdump --line-numbers --disassemble --demangle --reloc --no-show-raw-insn --section=.text {}
│ │ │ │ @@ -2324601,15 +2324601,15 @@
│ │ │ │  	bl      387ae0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x131c0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r4,r3
│ │ │ │  	mr      r3,r31
│ │ │ │  	bl      38b8c0 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0xf3e0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	addis   r4,r2,-47
│ │ │ │ -	li      r5,106
│ │ │ │ +	li      r5,110
│ │ │ │  	addi    r4,r4,30344
│ │ │ │  	mr      r29,r3
│ │ │ │  	bl      365900 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x353a0>
│ │ │ │  	ld      r2,24(r1)
│ │ │ │  	mr      r3,r29
│ │ │ │  	bl      372e20 <xercesc_3_2::DefaultHandler::fatalError(xercesc_3_2::SAXParseException const&)@@Base-0x27e80>
│ │ │ │  	ld      r2,24(r1)
│ │ │ ├── .fini
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .rodata
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .eh_frame_hdr
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .eh_frame
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .gcc_except_table
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .init_array
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .fini_array
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .data.rel.ro
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .plt
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .got
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .data
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .bss
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .gnu_debugaltlink
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .gnu.attributes
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .gnu_debuglink
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ │ ├── .shstrtab
│ │ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/lib/powerpc64le-linux-gnu/libsumocs.so
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/lib/python3/dist-packages/libsumo/_libsumo.cpython-313-powerpc64le-linux-gnu.so
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/activitygen.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/dfrouter.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/duarouter.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/emissionsDrivingCycle.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/emissionsMap.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/jtrrouter.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/marouter.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/netconvert.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/netedit.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/netgenerate.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/od2trips.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/polyconvert.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/sumo-gui.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.
│ │ ├── ./usr/share/man/man1/sumo.1.gz
│ │ │┄ Timeout exceeded; details may be incomplete.